Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
-
Repair kits
- Suspension kit W123 280E (123.033) 185 hp Petrol
- Brake caliper repair kit W123 280E (123.033) 185 hp Petrol
- Guide sleeve kit, brake caliper W123 280E (123.033) 185 hp Petrol
- Repair set, crankcase breather W123 280E (123.033) 185 hp Petrol
- Valve, engine block breather W123 280E (123.033) 185 hp Petrol
- Repair kit, wheel suspension W123 280E (123.033) 185 hp Petrol
- Alternator parts W123 280E (123.033) 185 hp Petrol
- Accessory kit, brake shoes W123 280E (123.033) 185 hp Petrol
- Gear linkage repair kit W123 280E (123.033) 185 hp Petrol
- Mounting kit, control lever W123 280E (123.033) 185 hp Petrol
- Anti-roll bar stabiliser kit 123-Series 280E (123.033) 185 hp Petrol
- Repair kit, differential 123-Series 280E (123.033) 185 hp Petrol
- Repair kit, support- / steering link 123-Series 280E (123.033) 185 hp Petrol
- Master cylinder repair kit 123-Series 280E (123.033) 185 hp Petrol
- Steering rack repair kit 123-Series 280E (123.033) 185 hp Petrol
- Repair kit, distributor 123-Series 280E (123.033) 185 hp Petrol
- Repair kit, clutch master cylinder 123-Series 280E (123.033) 185 hp Petrol
- Clutch slave cylinder repair kit 123-Series 280E (123.033) 185 hp Petrol
- Gasket set, hydraulic pump 123-Series 280E (123.033) 185 hp Petrol
- Starter motor parts 123-Series 280E (123.033) 185 hp Petrol
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Valve, engine block breather W123 280 E 2.8 (123.033) 185 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
MERCEDES-BENZ Saloon (W123) 280 E (123.033) year of manufacture 1976, 185 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Operating Mode: Pressure Controlled
- Observe technical data
- Supplementary Article / Supplementary Info: with gasket/seal
- Recommended change interval [km]: 60000
- Observe the vehicle manufacturer specifications
- Fitting Position: engine sided
- Length [mm]: 80
- Width [mm]: 53,0
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Housing material: Polyamid 6.6
- Height [mm]: 30
- Valve type: Breather Valve
- Recommended change interval [years]: 3
- Observe service information
- Seal Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
- Weight [kg]: 0,0121
- Supplementary Info: Original VAICO Quality
- Packaging width [cm]: 5,3
- Packaging height [cm]: 3
- Packaging Depth [cm]: 8
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Material: Plastic
- Weight [kg]: 0,101
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Operating Mode: Pressure Controlled
- Spindle Operating Mode: Pressure Controlled
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Weight [kg]: 0,15
- New Part
- Always compare old and new part (in particular OE No.)
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Cylinder Head
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Section: Upper section
- Fabrication Number: BKO-BM-003
- Condition: New
Over 100 in stock
Article №: DRM01244
incl. 20% VAT, excl. delivery costs
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- for OE number: 273 010 0162
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Crankcase
- Supplementary Info: Original VAICO Quality
- Packaging height [cm]: 0,45
- Packaging Depth [cm]: 0,75
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Length [mm]: 135
- Recommended change interval [km]: 60000
- Observe the vehicle manufacturer specifications
- Fitting Position: engine sided
- Width [mm]: 115,0
- Operating Mode: Pressure Controlled
- Valve type: Breather Valve
- Recommended change interval [years]: 3
- Housing material: Polyamid 6.6
- Observe service information
- Height [mm]: 120
- Observe technical data
- Supplementary Article / Supplementary Info: with gasket/seal
- Seal Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
- Weight [kg]: 0,2119
- Supplementary Info: Original VAICO Quality
- Packaging width [cm]: 12
- Packaging height [cm]: 13,2
- Packaging Depth [cm]: 13
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- for OE number: 271 018 0329
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Weight [kg]: 0,13
- New Part
- Always compare old and new part (in particular OE No.)
- Condition: New
Over 100 in stock
