Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber W210 E220CDI (210.006) 125 hp Diesel
- Coil spring W210 E220CDI (210.006) 125 hp Diesel
- Top strut mount and bearing W210 E220CDI (210.006) 125 hp Diesel
- Suspension kit, coil springs W210 E220CDI (210.006) 125 hp Diesel
- Shock absorber dust cover and bump stops W210 E220CDI (210.006) 125 hp Diesel
- Suspension kit, shock absorber and coil spring W210 E220CDI (210.006) 125 hp Diesel
- Repair kit, wheel suspension W210 E220CDI (210.006) 125 hp Diesel
- Spring cap W210 E220CDI (210.006) 125 hp Diesel
- Camber bolts W210 E220CDI (210.006) 125 hp Diesel
- Hydraulic oil W210 E220CDI (210.006) 125 hp Diesel
- Suspension sphere, pneumatic suspension E-Class E220CDI (210.006) 125 hp Diesel
- Mounting, shock absorbers E-Class E220CDI (210.006) 125 hp Diesel
- Relay, leveling control E-Class E220CDI (210.006) 125 hp Diesel
- Shock absorber mounting brackets E-Class E220CDI (210.006) 125 hp Diesel
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Shock absorber W210 E 220 CDI 2.2 (210.006) 125 hp Diesel
Article №: 854S1544
Details
-
- Suspension: for vehicles without electronic suspension control, for vehicles with standard suspension, for vehicles with sports suspension
- Vehicle configuration line / variant: Avantgarde
- Manufacturer Exclusion: ADS
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- max. length [mm]: 535
- min. length [mm]: 455
- Quantity per axle: 1
- Condition: New
More
£24,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S0013
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber, Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Suspension: for vehicles without electronic suspension control
- max. length [mm]: 535
- min. length [mm]: 455
- Quantity per axle: 2
- Condition: New
More
£24,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S18827
Details
-
- Suspension: for vehicles with standard suspension
- not for vehicle configuration line / variant: Avantgarde
- Braking/Drive Dynamics: for vehicles without ADS
- Fitting Position: Front Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£25,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S19081
Details
-
- Vehicle Equipment: for vehicles without level control
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£32,73
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S21301
Details
- Fitting Position: Front Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with standard suspension
- Condition: New
More
£58,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 232-02-093
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£21,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 2001018
Details
-
- Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control
- Vehicle Equipment: for vehicles without level control
- Vehicle configuration line / variant: Avantgarde
- Fitting Position: Rear Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£22,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSA-0132655
Details
-
- Suspension: for vehicles without electronic suspension control, for vehicles with standard suspension, for vehicles with sports suspension
- Vehicle configuration line / variant: Avantgarde
- Manufacturer Exclusion: ADS
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- max. length [mm]: 535
- min. length [mm]: 455
- Quantity per axle: 1
- Condition: New
More
£22,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSA-01334894
Details
-
- Suspension: for vehicles with standard suspension
- not for vehicle configuration line / variant: Avantgarde
- Braking/Drive Dynamics: for vehicles without ADS
- Fitting Position: Front Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£23,90
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 232-01-083
Details
-
- Fitting Position: Front Axle
- Braking/Drive Dynamics: for vehicles without ADS
- Suspension: for vehicles with standard suspension
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£26,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 563340
Details
-
- Vehicle Equipment: for vehicles without level control
- Suspension: for vehicles without sports suspension, for vehicles without electronic suspension control
- not for vehicle type: Avantgarde
- Fitting Position: Rear Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£27,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A-ME-027
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Fabrication Number: A-ME-027
- Condition: New
More
£30,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A-ME-028
Details
- Fitting Position: Rear Axle Left, Rear Axle Right
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Replace in pairs only
- Observe technical data
- Fabrication Number: A-ME-028
- Condition: New
More
£32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DSF054G
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Vehicle Identification Number (VIN) to: A 219257
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 32116890
Details
-
- not for vehicle configuration line / variant: Avantgarde
- Suspension: for vehicles without sports suspension, for vehicles without electronic suspension control
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£32,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 317256-PCS-MS
Details
-
- Suspension: for vehicles with standard suspension
- not for vehicle configuration line / variant: Avantgarde
- Braking/Drive Dynamics: for vehicles without ADS
- Fitting Position: Front Axle Left
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Net weight [kg]: 1,94
- Gross Weight [kg]: 2,06
- Condition: New
More
£32,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GH-333351
Details
-
- Suspension: for vehicles without sports suspension, for vehicles without electronic suspension control
- not for vehicle configuration line / variant: Avantgarde
- Fitting Position: Front Axle, Front Axle Right, Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£34,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 317260-PCS-MS
Details
-
- not for vehicle configuration line / variant: Avantgarde
- Braking/Drive Dynamics: for vehicles without ADS
- Suspension: for vehicles with increased ground clearance
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Net weight [kg]: 1,94
- Gross Weight [kg]: 2,06
- Condition: New
More
£35,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 463340
Details
-
- Suspension: for vehicles without sports suspension, for vehicles without electronic suspension control
- not for vehicle type: Avantgarde
- Fitting Position: Front Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£36,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 2001004
Details
- Fitting Position: Front Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£37,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 32122410
Details
-
- Suspension: for vehicles with standard suspension
- not for vehicle configuration line / variant: Avantgarde
- Braking/Drive Dynamics: for vehicles without ADS
- Vehicle Identification Number (VIN) from: A 219258
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£39,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 32122420
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Suspension: for vehicles without sports suspension
- Condition: New
More
£41,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DSF028G
Details
-
- Suspension: for vehicles without sports suspension, for vehicles without electronic suspension control
- not for vehicle configuration line / variant: Avantgarde, ADS
- Fitting Position: Front Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£42,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MA-00296
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- for OE number: 2103200430
- Condition: New
More
£42,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MA-00295
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- for OE number: A2103203330
- Condition: New
More
£42,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 180 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
