Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Mercedes S212 E500 (212.272) 388 hp Petrol
- Coil spring Mercedes S212 E500 (212.272) 388 hp Petrol
- Top strut mount and bearing Mercedes S212 E500 (212.272) 388 hp Petrol
- Suspension kit, coil springs Mercedes S212 E500 (212.272) 388 hp Petrol
- Shock absorber dust cover and bump stops Mercedes S212 E500 (212.272) 388 hp Petrol
- Air suspension Mercedes S212 E500 (212.272) 388 hp Petrol
- Boot, air suspension Mercedes S212 E500 (212.272) 388 hp Petrol
- Air suspension compressor Mercedes S212 E500 (212.272) 388 hp Petrol
- Repair kit, wheel suspension Mercedes S212 E500 (212.272) 388 hp Petrol
- Spring cap Mercedes S212 E500 (212.272) 388 hp Petrol
- Hydraulic oil E-Class E500 (212.272) 388 hp Petrol
- Camber bolts E-Class E500 (212.272) 388 hp Petrol
- Mounting, shock absorbers E-Class E500 (212.272) 388 hp Petrol
- Relay, leveling control E-Class E500 (212.272) 388 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Shock absorber Mercedes S212 E 500 5.5 (212.272) 388 hp Petrol
Article №: JGS1276T
Details
- Supplementary Info: TWIN
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye
- Diameter [mm]: 45
- Length [mm]: 440, 292
- Standpipe Diameter [mm]: 12,5
- Check OE number
- Condition: New
More
-56%
compared to RRP:
£142,16
£61,63
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QAG181139
Details
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles with level control, for vehicles without AMG sports package
- Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles with increased ground clearance, for vehicles without sports suspension
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
-31%
compared to RRP:
£111,81
£76,81
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 349138
Details
-
- Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles with increased ground clearance, for vehicles without sports suspension
- Vehicle Equipment: for vehicles with level control, for vehicles without AMG sports package
- Product line: Excel-G
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
-44%
compared to RRP:
£146,70
£80,95
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 314 345
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension, for vehicles with increased ground clearance, for vehicles with comfort suspension, for vehicles with sports suspension
- Check OE number
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Parameter: SE30X162A
- Condition: New
More
-51%
compared to RRP:
£166,53
£80,95
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 026 623 0016
Details
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles with comfort suspension
- Replace in pairs only
- Article number of recommended accessories: 014 640 0017, 014 641 0004, 014 641 0004/S
- Condition: New
More
-34%
compared to RRP:
£129,90
£84,63
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 02.30.295
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- for OE number: 212 323 6000
- Condition: New
More
£85,55
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 742129SP
Details
-
- Fitting Position: Front Axle, Left, Right
- Suspension: for vehicles with sports suspension
- Article number of recommended accessories: MK416
-
- Fitting Position: Front Axle, Left, Right
- Suspension: for vehicles with comfort suspension
- Article number of recommended accessories: MK416
-
- Fitting Position: Front Axle, Left, Right
- Suspension: for vehicles with increased ground clearance
- Article number of recommended accessories: MK416
-
- Fitting Position: Front Axle
- Article number of recommended accessories: MK416
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Piston Rod Diameter [mm]: 25
- Weight [kg]: 6,060
- Length [mm]: 275, 443
- Bore Diameter [mm]: 35
- Article number of recommended accessories: MK416
- Packaging length [cm]: 57,3
- Packaging width [cm]: 20,4
- Packaging height [cm]: 20,4
- Customs tariff number: 87088035
- Condition: New
More
-72%
compared to RRP:
£311,51
£85,55
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24-194136
Details
-
- Braking/Drive Dynamics: for vehicles without Airmatic DC
- Suspension: for vehicles with standard suspension, for vehicles with bad road version
- Product line: B4 OE Replacement (DampMatic®)
- Fitting Position: Rear Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
-62%
compared to RRP:
£232,86
£86,47
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 452311
Details
-
- Fitting Position: Front Axle
- Shock Absorber System: Normal Suspension
- Suspension: for vehicles with increased ground clearance, for vehicles with comfort suspension, for vehicles with sports suspension
- Article number of recommended accessories: MK416
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- max. length [mm]: 443
- Condition: New
More
£91,53
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: JGM1122T
Details
- Supplementary Info: TWIN
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Yoke
- Diameter [mm]: 58
- Piston Rod Diameter [mm]: 25
- Length [mm]: 515, 359
- Check OE number
- Condition: New
More
-67%
compared to RRP:
£307,87
£98,89
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: JGM1120T
Details
- Supplementary Info: TWIN
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Yoke
- Diameter [mm]: 54
- Piston Rod Diameter [mm]: 25
- Quantity per axle: 1
- Length [mm]: 595, 426
- Check OE number
- Condition: New
More
-64%
compared to RRP:
£280,07
£100,73
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A-1401G
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with comfort suspension
- Piston Rod Diameter [mm]: 25
- Thread Size: M14x1.5
- Suspension Strut Outer Diameter [mm]: 55
- Distance of mounting bores [mm]: 96
- Piston Rod Length [mm]: 225
- Bore Diameter 1 [mm]: 13
- Bore Diameter 2 [mm]: 13
- Condition: New
More
-61%
compared to RRP:
£265,38
£101,19
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 11-0926
Details
-
- Braking/Drive Dynamics: for vehicles without Airmatic DC
- Suspension: for vehicles with standard suspension, for vehicles with bad road version
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom Clamp
- Article number of recommended accessories: 72-3355
- Condition: New
More
£101,65
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 317 838
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- Check OE number
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Parameter: SE30X162A
- Replace in pairs only
- Condition: New
More
-57%
compared to RRP:
£239,81
£102,11
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GH-353312
Details
-
- Suspension: for vehicles with bad road version, for vehicles with comfort suspension, for vehicles with standard suspension, for vehicles with sports suspension
- Check OE number
- Fitting Position: Front Axle, Front Axle Right, Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber, Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Article number of recommended accessories: GH-692207, GH-623312
- Condition: New
More
£111,77
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 22-194091
Details
-
- Braking/Drive Dynamics: for vehicles without Airmatic DC
- Suspension: for vehicles with standard suspension, for vehicles with bad road version
- Product line: B4 OE Replacement (DampMatic®)
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Condition: New
More
-63%
compared to RRP:
£318,11
£116,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 317 560
Details
-
- Fitting Position: Front Axle
- Suspension: for vehicles with comfort suspension, for vehicles with sports suspension, for vehicles with standard suspension
- Check OE number
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Parameter: SFE36/25X167A
- Condition: New
More
-63%
compared to RRP:
£325,76
£119,59
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24-171014
Details
-
- Vehicle type: Avantgarde
- Braking/Drive Dynamics: for vehicles without Airmatic DC
- Suspension: for vehicles with standard suspension, for vehicles with sports suspension
- Product line: B6 Performance
- Fitting Position: Rear Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
Article №: QAG181560
Details
-
- Fitting Position: Front Axle
- Suspension: for vehicles with bad road version, for vehicles with comfort suspension, for vehicles with standard suspension, for vehicles with sports suspension
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
Article №: 8745-1323
Details
-
- Fitting Position: Front Axle
- not for vehicle configuration line / variant: AMG
- Suspension: for vehicles without heavy duty suspension
- Spring Type: for vehicles without air suspension
- Quantity per axle: 2
- Shock Absorber System: Twin-Tube, Built-in adjustable
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: clamp below, Top pin
- max. length [mm]: 653
- min. length [mm]: 477
- Colour: red
- Packaging length [cm]: 570
- Packaging width [cm]: 190
- Packaging height [cm]: 190
- Condition: New
More
Article №: V30-3445
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles with comfort suspension
- Condition: New
More
Article №: 8741-1570SPORT
Details
-
- Quantity per axle: 2
- Suspension: for vehicles without heavy duty suspension
- not for vehicle configuration line / variant: AMG, Airmatic, 4Matic
- Product line: SPORT
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- max. length [mm]: 657
- min. length [mm]: 481
- Weight [kg]: 5,76
- Colour: yellow
- adjustable: adjustable
- Packaging length [cm]: 570
- Packaging width [cm]: 190
- Packaging height [cm]: 190
- Condition: New
More
Article №: 22-302380
Details
-
- Braking/Drive Dynamics: for vehicles without Airmatic DC
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Condition: New
More
-21%
compared to RRP:
£331,62
£258,77
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1981-01-4430
Details
- Fitting Position: Rear Axle Right
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye
- Paired product: 1980-01-4330
- Gross Weight [kg]: 5
- Condition: New
More
Article №: 1980-01-4330
Details
- Fitting Position: Rear Axle Left
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye
- Paired product: 1981-01-4430
- Gross Weight [kg]: 5
- Condition: New
More
Showing 25 out of 95 products
Show the next items
- 1
- 2
- 3
- 4
