Car part
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Wheel hub MAZDA RX-7 II Coupe (FC) 1.3 Turbo 185 hp Petrol
- Wheel bearing MAZDA RX-7 II Coupe (FC) 1.3 Turbo 185 hp Petrol
- Inner tie rod MAZDA RX-7 II Coupe (FC) 1.3 Turbo 185 hp Petrol
- Ball joint MAZDA RX-7 II Coupe (FC) 1.3 Turbo 185 hp Petrol
- Wheel bolts and wheel nuts MAZDA RX-7 II Coupe (FC) 1.3 Turbo 185 hp Petrol
- Wheel spacers MAZDA RX-7 II Coupe (FC) 1.3 Turbo 185 hp Petrol
- Camber bolts MAZDA RX-7 II Coupe (FC) 1.3 Turbo 185 hp Petrol
- Wheel nuts MAZDA RX-7 II Coupe (FC) 1.3 Turbo 185 hp Petrol
- Wiper and washer system
Suspension arm MAZDA RX-7 II Coupe (FC) 1.3 Turbo 185 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
MAZDA RX 7 II (FC) 1.3 Turbo year of manufacture 1985, 185 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Fitting Position: Upper, Rear Axle Right, Rear Axle Left
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle Left, Lower
- Control/Trailing Arm Type: Control Arm
- Paired product: ZWT-MZ-078
- Fabrication Number: ZWT-MZ-079
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Left, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 440
- Height [mm]: 65
- Paired product: TC2185
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 380
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle Left
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 613
- Packaging width [cm]: 6,5
- Packaging height [cm]: 5,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle Right
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 613
- Packaging width [cm]: 6,5
- Packaging height [cm]: 5,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right, Lower, outer
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Paired product: 36918 01
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Control/Trailing Arm Type: Control Arm
- Paired product: FD-WP-7998
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 61,2
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8,8
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Material: Cast Steel
- Rod/Strut: Guide Rod
- Control/Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Left, Upper, Rear Axle Right
- Weight [kg]: 1,484
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle Right, Lower
- Control/Trailing Arm Type: Semi-Trailing Arm
- Paired product: ZWT-MZ-079
- Fabrication Number: ZWT-MZ-078
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, Lower, Front
- Control/Trailing Arm Type: Trailing Arm
- Cone Size [mm]: 19
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: both sides
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 550
- Height [mm]: 88
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Width [mm]: 190
- Condition: New
Over 100 in stock
