Car part
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Oils and fluids
- Pipes and hoses
- Repair kits
- Steering
-
Suspension
- Wheel hub MAZDA 626 I Coupe 1.6 75 hp Petrol
- Wheel bearing MAZDA 626 I Coupe 1.6 75 hp Petrol
- Track rod end MAZDA 626 I Coupe 1.6 75 hp Petrol
- Inner tie rod MAZDA 626 I Coupe 1.6 75 hp Petrol
- Ball joint MAZDA 626 I Coupe 1.6 75 hp Petrol
- Wheel bolts and wheel nuts MAZDA 626 I Coupe 1.6 75 hp Petrol
- Camber bolts MAZDA 626 I Coupe 1.6 75 hp Petrol
- Wheel nuts MAZDA 626 I Coupe 1.6 75 hp Petrol
- Shaft seal, wheel hub MAZDA 626 I Coupe 1.6 75 hp Petrol
- Wiper and washer system
Suspension arm MAZDA 626 I Coupe 1.6 75 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
MAZDA 626 I Coupe 1.6 year of manufacture 1978, 75 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Fitting Position: Upper, Rear Axle Right, Rear Axle Left
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle Left, Lower
- Control/Trailing Arm Type: Control Arm
- Paired product: ZWT-MZ-078
- Fabrication Number: ZWT-MZ-079
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Left, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 440
- Height [mm]: 65
- Paired product: TC2185
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 380
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle Left
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 613
- Packaging width [cm]: 6,5
- Packaging height [cm]: 5,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle Right
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 613
- Packaging width [cm]: 6,5
- Packaging height [cm]: 5,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right, Lower, outer
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Paired product: 36918 01
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Control/Trailing Arm Type: Control Arm
- Paired product: FD-WP-7998
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 61,2
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8,8
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Material: Cast Steel
- Rod/Strut: Guide Rod
- Control/Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Left, Upper, Rear Axle Right
- Weight [kg]: 1,484
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle Right, Lower
- Control/Trailing Arm Type: Semi-Trailing Arm
- Paired product: ZWT-MZ-079
- Fabrication Number: ZWT-MZ-078
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, Lower, Front
- Control/Trailing Arm Type: Trailing Arm
- Cone Size [mm]: 19
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: both sides
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 550
- Height [mm]: 88
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Width [mm]: 190
- Condition: New
Over 100 in stock
