Car part
    - Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- 
                    Engine
                                            - Engine oil Mazda 3 Saloon 2.0 (BKEP) 150 hp Petrol
- Air filter Mazda 3 Saloon 2.0 (BKEP) 150 hp Petrol
- Lambda sensor Mazda 3 Saloon 2.0 (BKEP) 150 hp Petrol
- Oil filter Mazda 3 Saloon 2.0 (BKEP) 150 hp Petrol
- Fuel filter Mazda 3 Saloon 2.0 (BKEP) 150 hp Petrol
- Spark plugs Mazda 3 Saloon 2.0 (BKEP) 150 hp Petrol
- Turbo Mazda 3 Saloon 2.0 (BKEP) 150 hp Petrol
- Radiator Mazda 3 Saloon 2.0 (BKEP) 150 hp Petrol
- Water pump Mazda 3 Saloon 2.0 (BKEP) 150 hp Petrol
- EGR valve Mazda 3 Saloon 2.0 (BKEP) 150 hp Petrol
- Engine mount 3 2.0 (BKEP) 150 hp Petrol
- Serpentine belt 3 2.0 (BKEP) 150 hp Petrol
- Injectors 3 2.0 (BKEP) 150 hp Petrol
- Ignition coil 3 2.0 (BKEP) 150 hp Petrol
- Timing chain kit 3 2.0 (BKEP) 150 hp Petrol
- Timing chain 3 2.0 (BKEP) 150 hp Petrol
- Mass air flow sensor (MAF) 3 2.0 (BKEP) 150 hp Petrol
- Timing belt 3 2.0 (BKEP) 150 hp Petrol
- Thermostat 3 2.0 (BKEP) 150 hp Petrol
- Head gasket 3 2.0 (BKEP) 150 hp Petrol
- Crankshaft pulley 3 2.0 (BKEP) 150 hp Petrol
- Poly v-belt kit 3 2.0 (BKEP) 150 hp Petrol
- Throttle body 3 2.0 (BKEP) 150 hp Petrol
- Radiator fan 3 2.0 (BKEP) 150 hp Petrol
- Rocker cover gasket 3 2.0 (BKEP) 150 hp Petrol
- Tensioner pulley, v-ribbed belt 3 2.0 (BKEP) 150 hp Petrol
- Belt tensioner, v-ribbed belt 3 2.0 (BKEP) 150 hp Petrol
- Engine coolant 3 2.0 (BKEP) 150 hp Petrol
- Intake manifold 3 2.0 (BKEP) 150 hp Petrol
- PCV valve 3 2.0 (BKEP) 150 hp Petrol
- Intercooler pipe 3 2.0 (BKEP) 150 hp Petrol
- Expansion tank 3 2.0 (BKEP) 150 hp Petrol
- Oil cooler 3 2.0 (BKEP) 150 hp Petrol
- Cylinder head gasket set 3 2.0 (BKEP) 150 hp Petrol
- Camshaft adjustment valve 3 2.0 (BKEP) 150 hp Petrol
- Oil sump 3 2.0 (BKEP) 150 hp Petrol
- Turbo solenoid valve 3 2.0 (BKEP) 150 hp Petrol
- Crankshaft seal 3 2.0 (BKEP) 150 hp Petrol
- Timing belt tensioner pulley 3 2.0 (BKEP) 150 hp Petrol
- Camshaft sensor 3 2.0 (BKEP) 150 hp Petrol
- Oil pump 3 2.0 (BKEP) 150 hp Petrol
- Piston rings 3 2.0 (BKEP) 150 hp Petrol
- Idler pulley, serpentine belt 3 2.0 (BKEP) 150 hp Petrol
- Crankshaft sensor 3 2.0 (BKEP) 150 hp Petrol
- Head bolts 3 2.0 (BKEP) 150 hp Petrol
- Camshaft 3 2.0 (BKEP) 150 hp Petrol
- Intake manifold gasket 3 2.0 (BKEP) 150 hp Petrol
- Crankcase gasket 3 2.0 (BKEP) 150 hp Petrol
- Piston 3 2.0 (BKEP) 150 hp Petrol
- Camshaft adjuster 3 2.0 (BKEP) 150 hp Petrol
- Gear, camshaft 3 2.0 (BKEP) 150 hp Petrol
- Sump plug 3 2.0 (BKEP) 150 hp Petrol
- Manifold absolute pressure (MAP) sensor 3 2.0 (BKEP) 150 hp Petrol
- Injector seals 3 2.0 (BKEP) 150 hp Petrol
- Turbo gasket 3 2.0 (BKEP) 150 hp Petrol
- Full gasket set, engine 3 2.0 (BKEP) 150 hp Petrol
- Boost pressure sensor 3 2.0 (BKEP) 150 hp Petrol
- Crankshaft bearing 3 2.0 (BKEP) 150 hp Petrol
- Coolant temperature sensor 3 2.0 (BKEP) 150 hp Petrol
- Main bearings, crankshaft 3 2.0 (BKEP) 150 hp Petrol
- Engine electrics 3 2.0 (BKEP) 150 hp Petrol
- Coolant flange 3 2.0 (BKEP) 150 hp Petrol
- Intake pipe, air filter 3 2.0 (BKEP) 150 hp Petrol
- Exhaust manifold gasket 3 2.0 (BKEP) 150 hp Petrol
- Intake air control valve 3 2.0 (BKEP) 150 hp Petrol
- Crankcase breather hose 3 2.0 (BKEP) 150 hp Petrol
- Sump gasket 3 2.0 (BKEP) 150 hp Petrol
- Exhaust manifold 3 2.0 (BKEP) 150 hp Petrol
- Exhaust valve 3 2.0 (BKEP) 150 hp Petrol
- Valve stem seals 3 2.0 (BKEP) 150 hp Petrol
- Oil pressure sensor 3 2.0 (BKEP) 150 hp Petrol
- Timing chain tensioner 3 2.0 (BKEP) 150 hp Petrol
- Expansion tank cap 3 2.0 (BKEP) 150 hp Petrol
- Inlet valves 3 2.0 (BKEP) 150 hp Petrol
- Timing cover gasket 3 2.0 (BKEP) 150 hp Petrol
- Temperature switch, radiator fan 3 2.0 (BKEP) 150 hp Petrol
- Knock sensor 3 2.0 (BKEP) 150 hp Petrol
- Performance air filter 3 2.0 (BKEP) 150 hp Petrol
- Egr valve gasket 3 2.0 (BKEP) 150 hp Petrol
- Throttle position sensor 3 2.0 (BKEP) 150 hp Petrol
- Accelerator pedal position sensor 3 2.0 (BKEP) 150 hp Petrol
- Drive chain 3 2.0 (BKEP) 150 hp Petrol
- Oil cap 3 2.0 (BKEP) 150 hp Petrol
- Oil drain plug gasket 3 2.0 (BKEP) 150 hp Petrol
- Valve guide / stem seal / parts 3 2.0 (BKEP) 150 hp Petrol
- Skid plate 3 2.0 (BKEP) 150 hp Petrol
- Oil filter housing gasket 3 2.0 (BKEP) 150 hp Petrol
- Coolant circuit seals 3 2.0 (BKEP) 150 hp Petrol
- Coolant level sensor 3 2.0 (BKEP) 150 hp Petrol
- Oil temperature sensor 3 2.0 (BKEP) 150 hp Petrol
- Radiator cap 3 2.0 (BKEP) 150 hp Petrol
- Hose, valve cover breather 3 2.0 (BKEP) 150 hp Petrol
- Thermostat gasket 3 2.0 (BKEP) 150 hp Petrol
- Plug, spark plug 3 2.0 (BKEP) 150 hp Petrol
- Engine control unit (ECU) 3 2.0 (BKEP) 150 hp Petrol
- Timing chain guide 3 2.0 (BKEP) 150 hp Petrol
- Water pump gasket 3 2.0 (BKEP) 150 hp Petrol
- Seal, crankcase breather 3 2.0 (BKEP) 150 hp Petrol
- Oil pump gasket 3 2.0 (BKEP) 150 hp Petrol
- Seal, oil filler cap 3 2.0 (BKEP) 150 hp Petrol
- Intermediate / balance shaft 3 2.0 (BKEP) 150 hp Petrol
 
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
PCV valve Mazda 3 Saloon 2.0 (BKEP) 150 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
    MAZDA 3 Saloon (BK) 2.0 (BKEP) year of manufacture 2003, 150 hp vehicle parts products
             
                                
                
                
                incl. 20% VAT, excl. delivery costs
                
                - Length [mm]: 84
- Fitting Position: Cylinder Head
- Width [mm]: 28,0
- Observe technical data
- Observe the vehicle manufacturer specifications
- Seal Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
- Height [mm]: 61
- Operating Mode: Pressure Controlled
- Valve type: Breather Valve
- Recommended change interval [km]: 60000
- Housing material: Polyamid 6.6
- Recommended change interval [years]: 3
- Observe service information
- Supplementary Info: Original VAICO Quality
- Packaging width [cm]: 6,5
- Packaging height [cm]: 1,9
- Condition: New
Over 100 in stock
 
                                
                
                
                incl. 20% VAT, excl. delivery costs
                
                - Operating Mode: Pressure Controlled
- Observe technical data
- Supplementary Article / Supplementary Info: with gasket/seal
- Recommended change interval [km]: 60000
- Observe the vehicle manufacturer specifications
- Fitting Position: engine sided
- Length [mm]: 80
- Width [mm]: 53,0
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Housing material: Polyamid 6.6
- Height [mm]: 30
- Valve type: Breather Valve
- Recommended change interval [years]: 3
- Observe service information
- Seal Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
- Weight [kg]: 0,0121
- Supplementary Info: Original VAICO Quality
- Packaging width [cm]: 5,3
- Packaging height [cm]: 3
- Packaging Depth [cm]: 8
- Condition: New
Over 100 in stock
 
                                
                
                
                incl. 20% VAT, excl. delivery costs
                
                - Colour: black
- Material: Plastic
- Supplementary Article / Supplementary Info: with gasket/seal, with fastening/mounting material
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Observe service information
- Condition: New
Over 100 in stock
 
                                
                
                
                incl. 20% VAT, excl. delivery costs
                
                - Valve type: Diaphragm Valve, Breather Valve
- Observe the vehicle manufacturer specifications
- Observe service information
- Observe technical data
- Weight [kg]: 0,0477
- Supplementary Info: Original VAICO Quality
- Packaging width [cm]: 7,2
- Packaging height [cm]: 8,1
- Packaging Depth [cm]: 8,8
- Condition: New
Over 100 in stock
 
                                
                
                
                incl. 20% VAT, excl. delivery costs
                
                - Operating Mode: Pressure Controlled
- Valve type: Breather Valve, Diaphragm Valve
- Recommended change interval [km]: 60000
- Observe service information
- Housing material: Polyamid 6.6
- Fitting Position: Cylinder Head
- Height [mm]: 53
- Recommended change interval [years]: 3
- Observe the vehicle manufacturer specifications
- Length [mm]: 114
- Width [mm]: 110,0
- Observe technical data
- Weight [kg]: 0,569
- Supplementary Info: Original VAICO Quality
- Packaging width [cm]: 13,5
- Packaging height [cm]: 13,5
- Packaging Depth [cm]: 6
- Condition: New
Over 100 in stock
 
                                
                
                
                incl. 20% VAT, excl. delivery costs
                
                - Supplementary Article / Supplementary Info: without hose
- Observe technical data
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Recommended change interval [km]: 60000
- Length [mm]: 140
- Operating Mode: Pressure Controlled
- Valve type: Diaphragm Valve, Breather Valve
- Observe the vehicle manufacturer specifications
- Housing material: Polyamid 6.6
- Seal Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
- Width [mm]: 80,0
- Fitting Position: Cylinder Head
- Height [mm]: 65
- Recommended change interval [years]: 3
- Observe service information
- Weight [kg]: 0,139
- Supplementary Info: Original VAICO Quality
- Packaging width [cm]: 8,3
- Packaging height [cm]: 9
- Packaging Depth [cm]: 14,8
- Condition: New
Over 100 in stock
 
                                
                
                
                incl. 20% VAT, excl. delivery costs
                
                - Fitting Position: Cylinder Head
- Operating Mode: Pressure Controlled
- Valve type: Diaphragm Valve, Breather Valve
- Observe technical data
- Recommended change interval [km]: 60000
- Recommended change interval [years]: 3
- Observe service information
- Observe the vehicle manufacturer specifications
- Housing material: Polyamid 6.6
- Condition: New
Over 100 in stock
 
                 
                 
                