Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
-
Damping
- Shock absorber Range Rover L322 4.4 4x4 299 hp Petrol
- Top strut mount and bearing Range Rover L322 4.4 4x4 299 hp Petrol
- Suspension kit, coil springs Range Rover L322 4.4 4x4 299 hp Petrol
- Shock absorber dust cover and bump stops Range Rover L322 4.4 4x4 299 hp Petrol
- Air suspension Range Rover L322 4.4 4x4 299 hp Petrol
- Suspension kit, shock absorber and coil spring Range Rover L322 4.4 4x4 299 hp Petrol
- Boot, air suspension Range Rover L322 4.4 4x4 299 hp Petrol
- Air suspension compressor Range Rover L322 4.4 4x4 299 hp Petrol
- Repair kit, wheel suspension Range Rover L322 4.4 4x4 299 hp Petrol
- Hydraulic oil Range Rover L322 4.4 4x4 299 hp Petrol
- Relay, leveling control RANGE ROVER 4.4 4x4 299 hp Petrol
- Shock absorber mounting brackets RANGE ROVER 4.4 4x4 299 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Shock absorber Range Rover L322 4.4 4x4 299 hp Petrol
Article №: 44-191177
Details
-
- Vehicle type: Supercharged
- Spring Type: for vehicles with air suspension
- Suspension: for vehicles without electronic suspension control
- Product line: B4 OE Replacement (Air)
- Fitting Position: Rear Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
Article №: 24-323673
Details
-
- Spring Type: for vehicles with air suspension
- Suspension: for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
Article №: 11-0810
Details
-
- Spring Type: for vehicles with air suspension
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Rear Axle Right
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Paired product: 11-0811
- Condition: New
More
Article №: 1263-01-0740
Details
- Fitting Position: Front Axle Right
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Damper without Rebound Spring
- Shock Absorber Mounting Type: Bottom Plate
- Paired product: 1267-01-0750
- Gross Weight [kg]: 9
- Condition: New
More
Article №: A-LR-004
Details
- Fitting Position: Rear Axle Right
- Shock Absorber System: Electronically adjustable shock strength
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Braking/Drive Dynamics: for vehicles with Variable Damping System (VDS)
- Paired product: A-LR-005
- Fabrication Number: A-LR-004
- Condition: New
More
Article №: A-LR-005
Details
- Fitting Position: Rear Axle Left
- Shock Absorber System: Electronically adjustable shock strength
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Braking/Drive Dynamics: for vehicles with Variable Damping System (VDS)
- Paired product: A-LR-004
- Fabrication Number: A-LR-005
- Condition: New
More
Article №: SK-3122
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top yoke, Bottom eye
- Suspension: for vehicles without electronic suspension control
- Weight [kg]: 4,9
- Spring Type: for vehicles with air suspension
- replacement in pairs recommended
- Manufactured in: USA
- Packaging length [cm]: 83
- Packaging width [cm]: 16,5
- Packaging height [cm]: 17
- Net weight [kg]: 4,2
- Condition: New
More
Article №: 44-139872
Details
-
- Spring Type: for vehicles with air suspension
- Suspension: for vehicles with electronic suspension control
- Product line: B4 OE Replacement (Air)
- Fitting Position: Rear Axle Left
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Paired product: 44-139889
- Condition: New
More
Article №: 44-139889
Details
-
- Spring Type: for vehicles with air suspension
- Suspension: for vehicles with electronic suspension control
- Product line: B4 OE Replacement (Air)
- Fitting Position: Rear Axle Right
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Paired product: 44-139872
- Condition: New
More
Article №: 20 455 0181
Details
- Fitting Position: Rear
- Length [mm]: 325
- Colour: black
- Vehicle type: Motorcycle
- Condition: New
More
£ 30,81
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 20 455 0082
Details
- Fitting Position: Rear
- Length [mm]: 330
- Colour: black
- Vehicle type: Motorcycle
- Condition: New
More
£ 51,97
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 20 455 0701
Details
- Fitting Position: Rear
- Length [mm]: 404
- Colour: black
- Vehicle type: Motorcycle
- Condition: New
More
£ 54,73
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 33-104652
Details
- Product line: B8 5125
- Fitting Position: Rear Axle
- Shock Absorber System: Single Tube Upside Down
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Condition: New
More
£ 125,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1267-01-0750
Details
- Fitting Position: Front Axle Left
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Damper without Rebound Spring
- Shock Absorber Mounting Type: Bottom Plate
- Paired product: 1263-01-0740
- Gross Weight [kg]: 9
- Condition: New
More
Article №: A-1069GL
Details
-
- Spring Type: for vehicles with air suspension
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Rear Axle Left
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Paired product: A-1069GR
- Condition: New
More
Article №: A-1069GR
Details
-
- Spring Type: for vehicles with air suspension
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Rear Axle Right
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Paired product: A-1069GL
- Condition: New
More
Article №: 11-0811
Details
-
- Spring Type: for vehicles with air suspension
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Rear Axle Left
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Paired product: 11-0810
- Condition: New
More
Article №: JGT1032T
Details
-
- Fitting Position: Rear Axle
- Check OE number
- Product line: TWIN
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Diameter [mm]: 51
- Piston Rod Diameter [mm]: 14
- Quantity per axle: 1
- Length [mm]: 622, 442
- Observe technical data
- Condition: New
More
-17%
compared to RRP:
£ 231,43
£ 189,97
incl. 20% VAT, free delivery
Free delivery
Not in stock
Details
Article №: 11160-01-0260
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Damper without Rebound Spring
- Shock Absorber Mounting Type: Bottom eye
- Gross Weight [kg]: 5,5
- Condition: New
More
Article №: SK-3382
Details
- Fitting Position: Rear Axle
- Vehicle Identification Number (VIN) from: AA000001
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top yoke, Bottom eye
- Suspension: for vehicles with electronic suspension control
- Weight [kg]: 5,3
- Spring Type: for vehicles with air suspension
- Braking/Drive Dynamics: for vehicles with Variable Damping System (VDS)
- replacement in pairs recommended
- Manufactured in: China
- Packaging length [cm]: 82
- Packaging width [cm]: 16
- Packaging height [cm]: 17
- Net weight [kg]: 4,6
- Condition: New
More
£ 218,38
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: MM-AS346
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top yoke, Bottom eye
- Suspension: for vehicles without electronic suspension control
- Spring Type: for vehicles with air suspension
- Condition: New
More
Article №: 44-124748
Details
-
- Spring Type: for vehicles with air suspension
- Suspension: for vehicles without electronic suspension control
- Product line: B4 OE Replacement (Air)
- Fitting Position: Rear Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
Article №: ADJ138403
Details
- Fitting Position: Front Axle Left
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top eye
- Observe service information
- Paired product: ADJ138402
- Condition: New
More
-69%
compared to RRP:
£ 1104,99
£ 338,55
incl. 20% VAT, free delivery
Free delivery
Not in stock
Details
Article №: ADJ138402
Details
- Fitting Position: Front Axle Right
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Observe service information
- Paired product: ADJ138403
- Condition: New
More
-68%
compared to RRP:
£ 1104,99
£ 353,29
incl. 20% VAT, free delivery
Free delivery
Not in stock
Details
Article №: MM-AS249
Details
- Fitting Position: Rear Axle
- Vehicle Identification Number (VIN) from: AA000001
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top yoke, Bottom eye
- Suspension: for vehicles with electronic suspension control
- Spring Type: for vehicles with air suspension
- Braking/Drive Dynamics: for vehicles with Variable Damping System (VDS)
- Condition: New
More
Showing 25 out of 29 products
