Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
-
Sensors, relays, control units
- Lambda sensor Land Rover Defender Convertible 3.9 4x4 182 hp Petrol
- Mass air flow sensor (MAF) Land Rover Defender Convertible 3.9 4x4 182 hp Petrol
- ABS sensor Land Rover Defender Convertible 3.9 4x4 182 hp Petrol
- Window regulator Land Rover Defender Convertible 3.9 4x4 182 hp Petrol
- Temperature sensor Land Rover Defender Convertible 3.9 4x4 182 hp Petrol
- Crankshaft sensor Land Rover Defender Convertible 3.9 4x4 182 hp Petrol
- Coolant temperature sensor Land Rover Defender Convertible 3.9 4x4 182 hp Petrol
- Oil pressure sensor Land Rover Defender Convertible 3.9 4x4 182 hp Petrol
- Multifunctional relay Land Rover Defender Convertible 3.9 4x4 182 hp Petrol
- Brake light switch Land Rover Defender Convertible 3.9 4x4 182 hp Petrol
- Temperature switch, radiator fan DEFENDER 3.9 4x4 182 hp Petrol
- Reverse light switch DEFENDER 3.9 4x4 182 hp Petrol
- Indicator relay DEFENDER 3.9 4x4 182 hp Petrol
- ABS relay DEFENDER 3.9 4x4 182 hp Petrol
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Camshaft sensor Land Rover Defender Convertible 3.9 4x4 182 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
LAND ROVER Defender Off-Road Convertible (L316) 3.9 4x4 year of manufacture 1998, 182 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Sensor Type: Hall Sensor
- Number of pins: 3
- Voltage [V]: 12
- Corresponds to the original part in colour: smoke grey
- Supplementary Article / Supplementary Info: with gasket/seal
- Supplementary Article / Supplementary Info Info 2: without cable
- Number of mounting bores: 1
- Assy./disassy. by qualified personnel required!
- Condition: New
Over 100 in stock
Camshaft position sensor Hall Sensor (NRF)

incl. 20% VAT, excl. delivery costs
- Sensor Type: Hall Sensor
- Mounting Type: Screw Connection
- Shape: oval
- Number of pins: 3
- Fitting Depth [mm]: 26,5
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Condition: New
Over 100 in stock
Camshaft position sensor Hall Sensor, 3 (SNR)
incl. 20% VAT, excl. delivery costs
- Sensor Type: Hall Sensor
- Number of connectors: 3
- Fitting Depth [mm]: 26,5
- Rated Voltage [V]: 12
- Number of mounting bores: 1
- Operating temperature from [°C]: -40
- Operating temperature to [°C]: 125
- Connector Shape: rectangular
- Colour: grey
- Condition: New
Over 100 in stock