Car part
- Body
- Brakes
- Damping
- Electrics
- Engine
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Ignition and preheating
- Interior
- Lighting
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Wheel hub Jeep Grand Cherokee mk1 4.0 193 hp Petrol
- Wheel bearing Jeep Grand Cherokee mk1 4.0 193 hp Petrol
- Anti-roll bar link Jeep Grand Cherokee mk1 4.0 193 hp Petrol
- Track rod end Jeep Grand Cherokee mk1 4.0 193 hp Petrol
- Anti-roll bar bushes Jeep Grand Cherokee mk1 4.0 193 hp Petrol
- Wheel spacers Jeep Grand Cherokee mk1 4.0 193 hp Petrol
- Shock absorber mounting brackets Jeep Grand Cherokee mk1 4.0 193 hp Petrol
- Towbar / parts
- Wiper and washer system
Suspension bushes Jeep Grand Cherokee mk1 4.0 193 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
JEEP Grand Cherokee I (ZJ, ZG) 4.0 year of manufacture 1992, 193 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front, Rear Axle Upper, Rear, both sides, Upper Front Axle
- Inner Diameter [mm]: 10
- Material: PU (Polyurethane)
- Required quantity: 4
- Weight [kg]: 0,302
- Diameter [mm]: 42
- Outer Diameter 2 [mm]: 45,8
- Supplementary Article / Supplementary Info Info 2: with grease cap
- Follow installation instructions
- Shore-A hardness value, base body: 70, 80
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Inner Diameter [mm]: 10
- Control/Trailing Arm Type: for trailing arm
- Required quantity: 2
- Weight [kg]: 0,225
- Diameter [mm]: 45,3
- Outer Diameter 2 [mm]: 47,3
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear, Rear Axle Upper, Front
- Weight [kg]: 0,421
- Packaging length [cm]: 7,1
- Packaging width [cm]: 6,5
- Packaging height [cm]: 6,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle, Lower
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Lower, Front Axle, Front Axle Left
- Control/Trailing Arm Type: Control Arm
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front, Rear, in front of axle, Rear Axle Upper
- Weight [kg]: 0,254
- Packaging length [cm]: 5,8
- Packaging width [cm]: 5,8
- Packaging height [cm]: 5,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Weight [kg]: 0,104
- Supplementary Article / Supplementary Info Info 2: with grease cap
- Shore-A hardness value, base body: 90
- Colour: yellow
- Diameter [mm]: 37,1
- Required quantity: 2
- Rod/Strut: for panhard rod
- Inner Diameter [mm]: 12
- Material: PU (Polyurethane)
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, both sides
- Inner Diameter [mm]: 10
- Material: PU (Polyurethane)
- Required quantity: 1
- Weight [kg]: 0,065
- Diameter [mm]: 39
- Supplementary Article / Supplementary Info Info 2: with grease cap
- Colour: yellow
- Shore-A hardness value, base body: 90
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, Front Axle Left
- Quantity per axle: 1
- Condition: New
Over 100 in stock
Trailing arm / Suspension arm bush for control arm (TEDGUM)
incl. 20% VAT, excl. delivery costs
- Inner Diameter [mm]: 14,5
- Control/Trailing Arm Type: for control arm
- Required quantity: 2
- Weight [kg]: 0,475
- Diameter [mm]: 57,1
- Outer Diameter 2 [mm]: 58,6
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Right, Left, Rear, Lower
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle Upper, Rear, Front
- Condition: New
Over 100 in stock
