Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Brakes
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Ignition and preheating
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Wheel hub HYUNDAI Tiburon I Coupe 1.8 132 hp Petrol
- Wheel bearing HYUNDAI Tiburon I Coupe 1.8 132 hp Petrol
- Anti-roll bar link HYUNDAI Tiburon I Coupe 1.8 132 hp Petrol
- Track rod end HYUNDAI Tiburon I Coupe 1.8 132 hp Petrol
- Inner tie rod HYUNDAI Tiburon I Coupe 1.8 132 hp Petrol
- Ball joint HYUNDAI Tiburon I Coupe 1.8 132 hp Petrol
- Shock absorber dust cover and bump stops HYUNDAI Tiburon I Coupe 1.8 132 hp Petrol
- Suspension bushes HYUNDAI Tiburon I Coupe 1.8 132 hp Petrol
- Steering rack boot HYUNDAI Tiburon I Coupe 1.8 132 hp Petrol
- Mounting, shock absorbers HYUNDAI Tiburon I Coupe 1.8 132 hp Petrol
- Repair kit, support- / steering link TIBURON 1.8 132 hp Petrol
Anti-roll bar bushes HYUNDAI Tiburon I Coupe 1.8 132 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
HYUNDAI Tiburon I Coupe 1.8 year of manufacture 1996, 132 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Thickness 1 [mm]: 44,5
- Inner Diameter 2 [mm]: 22
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 25
- Fitting Position: lateral installation
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Inner Diameter [mm]: 10
- Diameter [mm]: 16
- Packaging width [cm]: 2,5
- Packaging height [cm]: 2,0
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Colour: red
- Material: PU (Polyurethane)
- Fitting Position: Lower, Upper
- Required quantity: 2
- Diameter [mm]: 25
- Inner Diameter [mm]: 10
- Weight [kg]: 0,013
- Shore-A hardness value, base body: 80
- Supplementary Article / Supplementary Info Info 2: with grease cap
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Length [mm]: 40
- Diameter [mm]: 25
- Height [mm]: 48
- Packing Type: Box
- Packaging length [cm]: 5,05
- Packaging width [cm]: 4,8
- Packaging height [cm]: 4,75
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 16,5
- Height [mm]: 44
- Packing Type: Box
- Packaging length [cm]: 4,4
- Packaging width [cm]: 4,3
- Packaging height [cm]: 4,1
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: inner, Front Axle
- Inner Diameter [mm]: 28
- Required quantity: 2
- Mounting Type: Rubber Mount
- Weight [kg]: 0,075
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 26
- Material: Rubber
- Length [mm]: 48
- Thickness [mm]: 48
- Width [mm]: 53
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 15
- Material: Rubber
- Length [mm]: 44
- Diameter [mm]: 44
- Thickness [mm]: 41
- Width [mm]: 44
- Observe service information
- Weight [kg]: 0,060
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Length [mm]: 43,5
- Diameter [mm]: 24
- Height [mm]: 44
- Packing Type: Box
- Packaging length [cm]: 4,5
- Packaging width [cm]: 4,5
- Packaging height [cm]: 4,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle, inner
- Inner Diameter [mm]: 25
- Material: PU (Polyurethane)
- Required quantity: 2
- Colour: red
- Shore-A hardness value, base body: 80
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 16
- Packaging length [cm]: 4,4
- Packaging width [cm]: 3,7
- Packaging height [cm]: 3,5
- Condition: New
Over 100 in stock
