Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
-
Repair kits
- Suspension kit Ford Focus mk3 Saloon 2.0TDCi 115 hp Diesel
- Brake caliper repair kit Ford Focus mk3 Saloon 2.0TDCi 115 hp Diesel
- Guide sleeve kit, brake caliper Ford Focus mk3 Saloon 2.0TDCi 115 hp Diesel
- Repair set, crankcase breather Ford Focus mk3 Saloon 2.0TDCi 115 hp Diesel
- Valve, engine block breather Ford Focus mk3 Saloon 2.0TDCi 115 hp Diesel
- Repair kit, wheel suspension Ford Focus mk3 Saloon 2.0TDCi 115 hp Diesel
- Alternator parts Ford Focus mk3 Saloon 2.0TDCi 115 hp Diesel
- Accessory kit, brake shoes Ford Focus mk3 Saloon 2.0TDCi 115 hp Diesel
- Mounting kit, control lever Ford Focus mk3 Saloon 2.0TDCi 115 hp Diesel
- Gear lever repair kit Ford Focus mk3 Saloon 2.0TDCi 115 hp Diesel
- Repair kit, injection nozzle FOCUS 2.0TDCi 115 hp Diesel
- Anti-roll bar stabiliser kit FOCUS 2.0TDCi 115 hp Diesel
- Handbrake repair kit FOCUS 2.0TDCi 115 hp Diesel
- Starter motor parts FOCUS 2.0TDCi 115 hp Diesel
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Valve, engine block breather Ford Focus mk3 Saloon 2.0 TDCi 115 hp Diesel
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
FORD FOCUS III Saloon 2.0 TDCi year of manufacture 2010, 115 hp vehicle parts products

incl. 20% VAT, excl. delivery costs
- Length [mm]: 84
- Fitting Position: Cylinder Head
- Width [mm]: 28,0
- Observe technical data
- Observe the vehicle manufacturer specifications
- Seal Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
- Height [mm]: 61
- Operating Mode: Pressure Controlled
- Valve type: Breather Valve
- Recommended change interval [km]: 60000
- Housing material: Polyamid 6.6
- Recommended change interval [years]: 3
- Observe service information
- Supplementary Info: Original VAICO Quality
- Packaging width [cm]: 6,5
- Packaging height [cm]: 1,9
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Operating Mode: Pressure Controlled
- Observe technical data
- Supplementary Article / Supplementary Info: with gasket/seal
- Recommended change interval [km]: 60000
- Observe the vehicle manufacturer specifications
- Fitting Position: engine sided
- Length [mm]: 80
- Width [mm]: 53,0
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Housing material: Polyamid 6.6
- Height [mm]: 30
- Valve type: Breather Valve
- Recommended change interval [years]: 3
- Observe service information
- Seal Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
- Weight [kg]: 0,0121
- Supplementary Info: Original VAICO Quality
- Packaging width [cm]: 5,3
- Packaging height [cm]: 3
- Packaging Depth [cm]: 8
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Colour: black
- Material: Plastic
- Supplementary Article / Supplementary Info: with gasket/seal, with fastening/mounting material
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Weight [kg]: 0,330
- Observe service information
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Valve type: Diaphragm Valve, Breather Valve
- Observe the vehicle manufacturer specifications
- Observe service information
- Observe technical data
- Weight [kg]: 0,0477
- Supplementary Info: Original VAICO Quality
- Packaging width [cm]: 7,2
- Packaging height [cm]: 8,1
- Packaging Depth [cm]: 8,8
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Operating Mode: Pressure Controlled
- Valve type: Breather Valve, Diaphragm Valve
- Recommended change interval [km]: 60000
- Observe service information
- Housing material: Polyamid 6.6
- Fitting Position: Cylinder Head
- Height [mm]: 53
- Recommended change interval [years]: 3
- Observe the vehicle manufacturer specifications
- Length [mm]: 114
- Width [mm]: 110,0
- Observe technical data
- Weight [kg]: 0,569
- Supplementary Info: Original VAICO Quality
- Packaging width [cm]: 13,5
- Packaging height [cm]: 13,5
- Packaging Depth [cm]: 6
- Condition: New
Over 100 in stock