Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Shock absorber Siena 1.4 77 hp Petrol
Article №: 854S0581
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Vehicle type: Heavy Duty
- Condition: New
More
£36,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A-FT-022
Details
- Fitting Position: Rear Axle Left, Rear Axle Right
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Fabrication Number: A-FT-022
- Condition: New
More
£29,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 351702070000
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Damper Module
- Shock Absorber Mounting Type: Top pin
- Spring Type: for vehicles with coil spring suspension
- Condition: New
More
£32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: FT11293
Details
- Fitting Position: Front Axle Left, Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut, Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Suspension: for vehicles with standard suspension
- max. length [mm]: 543
- min. length [mm]: 384
- Condition: New
More
£36,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MM-00178
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- for OE number: 46519347
- Condition: New
More
£36,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSA-0131254
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Vehicle type: Heavy Duty
- Condition: New
More
£38,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 349052
Details
- Product line: Excel-G
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£43,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: AGF100MT
Details
-
- Vehicle type: Albea
-
- Construction Year to: 12/2009
- Vehicle type: Siena
- Country Specific Design: Poland, Turkey
- Vehicle configuration line / variant: Type 2L
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
£53,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: G16356
Details
-
- Fitting Position: Front Axle
- Vehicle type: Albea
- Article number of recommended accessories: PK109
- for individual equipment ID: 021
-
- Fitting Position: Front Axle
- Vehicle configuration line / variant: 2L
- Article number of recommended accessories: PK109
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Piston Rod Diameter [mm]: 20
- Weight [kg]: 3,993
- Length [mm]: 384, 546
- Bore Diameter [mm]: 30
- Article number of recommended accessories: MK374R, MK375L, PK109
- Packaging length [cm]: 51,5
- Packaging width [cm]: 16,2
- Packaging height [cm]: 16,2
- Customs tariff number: 87088035
- Condition: New
More
Article №: 20 455 0701
Details
- Fitting Position: Rear
- Length [mm]: 404
- Colour: black
- Vehicle type: Motorcycle
- Condition: New
More
£48,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GH-302398
Details
- Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Article number of recommended accessories: GH-694706
- Condition: New
More
£19,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 280348-PCS-MS
Details
- Fitting Position: Rear Axle Left, Rear Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with standard suspension
- Quantity per axle: 1
- Net weight [kg]: 1,68
- Gross Weight [kg]: 1,80
- Condition: New
More
£20,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: GH-332398
Details
- Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Article number of recommended accessories: GH-694706
- Condition: New
More
£21,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 562329
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£22,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 11-0382
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£26,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: S011406G
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£26,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: MA-00178
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- for OE number: 46519347
- Condition: New
More
£31,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: G2120
Details
-
- Fitting Position: Rear Axle
- Vehicle type: Albea
-
- Fitting Position: Rear Axle
- Vehicle configuration line / variant: 2L, Type 2L
- Country Specific Design: Poland, Turkey
- for individual equipment ID: 021
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Piston Rod Diameter [mm]: 12,4
- Weight [kg]: 1,600
- Length [mm]: 308, 516
- Bore Diameter [mm]: 25
- Packaging length [cm]: 60
- Packaging width [cm]: 7,2
- Packaging height [cm]: 7,2
- Customs tariff number: 87088035
- Condition: New
More
£32,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: G44824
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Vehicle type: 172_
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut Insert
- Shock Absorber Mounting Type: Top pin
- Diameter: 41,4
- Piston Rod Diameter [mm]: 20
- Quantity per axle: 2
- Length [mm]: 538, 364
- Thread Size: M12x1,25
- Condition: New
More
£35,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: MJ00178
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- for OE number: 46519347
- Condition: New
More
£35,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: JGC149T
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Vehicle type: 172_
- Product line: TWIN
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut Insert
- Shock Absorber Mounting Type: Top pin
- Diameter: 41,4
- Piston Rod Diameter [mm]: 20
- Quantity per axle: 1
- Length [mm]: 538, 364
- Thread Size: M12x1,25
- Observe technical data
- Condition: New
More
£45,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 19-119328
Details
-
- Vehicle type: Heavy Duty
- Suspension: for vehicles with standard suspension
- Product line: B4 OE Replacement
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£50,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 16356
Details
-
- Construction Year to: 12/2012
- Vehicle type: Albea
-
- Construction Year to: 12/2009
- Vehicle type: Siena
- Country Specific Design: Poland, Turkey
- Vehicle configuration line / variant: Type 2L
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Condition: New
More
£68,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: JGC149S
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Vehicle type: 172_
- Supplementary Info: SINGLE
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut Insert
- Shock Absorber Mounting Type: Top pin
- Diameter: 41,4
- Piston Rod Diameter [mm]: 20
- Quantity per axle: 2
- Length [mm]: 538, 364
- Thread Size: M12x1,25
- Observe technical data
- Condition: New
More
£73,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BSG 25-300-005
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Damper Module
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
Showing 25 out of 37 products
