Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
-
Repair kits
- Suspension kit Audi A5 B8 Sportback 2.0TFSI 224 hp Petrol
- Brake caliper repair kit Audi A5 B8 Sportback 2.0TFSI 224 hp Petrol
- Guide sleeve kit, brake caliper Audi A5 B8 Sportback 2.0TFSI 224 hp Petrol
- Repair set, crankcase breather Audi A5 B8 Sportback 2.0TFSI 224 hp Petrol
- Valve, engine block breather Audi A5 B8 Sportback 2.0TFSI 224 hp Petrol
- Repair kit, wheel suspension Audi A5 B8 Sportback 2.0TFSI 224 hp Petrol
- Alternator parts Audi A5 B8 Sportback 2.0TFSI 224 hp Petrol
- Gear linkage repair kit Audi A5 B8 Sportback 2.0TFSI 224 hp Petrol
- Gear lever repair kit Audi A5 B8 Sportback 2.0TFSI 224 hp Petrol
- Repair kit, injection nozzle Audi A5 B8 Sportback 2.0TFSI 224 hp Petrol
- Anti-roll bar stabiliser kit A5 2.0TFSI 224 hp Petrol
- Repair kit, support- / steering link A5 2.0TFSI 224 hp Petrol
- Gasket set, hydraulic pump A5 2.0TFSI 224 hp Petrol
- Starter motor parts A5 2.0TFSI 224 hp Petrol
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Valve, engine block breather Audi A5 B8 Sportback 2.0 TFSI 224 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
AUDI A5 Sportback (8TA) 2.0 TFSI year of manufacture 2013, 224 hp vehicle parts products
-47%
compared to RRP:
£148,52
incl. 20% VAT, excl. delivery costs
- Valve type: Breather Valve
- Material: PA 66 GF 30, GRP (Glass fibre Reinforced Plastic)
- Opening Pressure [bar]: 0,3
- Filter type: with oil separation function
- Supplementary Article / Supplementary Info: with gasket/seal
- Condition: New
Over 100 in stock
-70%
compared to RRP:
£186,74
incl. 20% VAT, excl. delivery costs
- Fitting Position: Cylinder Head
- Supplementary Article / Supplementary Info: with seal rings
- Condition: New
Over 100 in stock
-6%
compared to RRP:
£67,10
incl. 20% VAT, excl. delivery costs
- Fitting Position: Engine Block
- Operating Mode: pneumatic
- Valve type: Breather Valve
- Supplementary Article / Supplementary Info: with gasket/seal
- Seal Material: HNBR (hydrogenated nitrile butadiene rubber)
- Material: GRP (Glass fibre Reinforced Plastic)
- Supplementary Article / Supplementary Info Info 2: with integrated oil separator
- Assy./disassy. by qualified personnel required!
- Condition: New
Over 100 in stock
-40%
compared to RRP:
£96,43
incl. 20% VAT, excl. delivery costs
- Version: IAM
- Supplementary Article / Supplementary Info: with gasket/seal
- Operating Mode: Pressure Controlled
- Fitting Position: Cylinder Head
- Alternative Repair Kit: 2385024, 2385072
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Weight [kg]: 1,04
- Seal Material: HNBR (hydrogenated nitrile butadiene rubber)
- Filter type: with oil separation function
- Operating Mode: pneumatic
- Fitting Position: Engine Block, Upper
- New Part
- Always compare old and new part (in particular OE No.)
- Condition: New
Over 100 in stock
-64%
compared to RRP:
£146,34
incl. 20% VAT, excl. delivery costs
- Valve type: Breather Valve
- Material: PA 66 GF 30, GRP (Glass fibre Reinforced Plastic)
- Operating Mode: pneumatic
- Seal Material: HNBR (hydrogenated nitrile butadiene rubber)
- Filter type: with oil separation function
- Fitting Position: Engine Block
- Supplementary Article / Supplementary Info: with gasket/seal
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fabrication Number: EPCV-VW-014
- Condition: New
Over 100 in stock
-52%
compared to RRP:
£173,64
incl. 20% VAT, excl. delivery costs
- Valve type: Breather Valve
- Material: PA 66 GF 30, GRP (Glass fibre Reinforced Plastic)
- Operating Mode: pneumatic
- Seal Material: HNBR (hydrogenated nitrile butadiene rubber)
- Opening Pressure [bar]: 0,15
- Fitting Position: Engine Block
- Filter type: with oil separation function
- Supplementary Article / Supplementary Info: with gasket/seal
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Weight [kg]: 1,04
- New Part
- Always compare old and new part (in particular OE No.)
- Condition: New
Over 100 in stock
Valve, engine block breather with gasket/seal (LCC)
incl. 20% VAT, excl. delivery costs
- Material: Plastic
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Supplementary Article / Supplementary Info: with gasket/seal
- Condition: New
Over 100 in stock
Valve, engine block breather Engine Block, Breather Valve, with gasket/seal, pneumatic (MAXGEAR)
incl. 20% VAT, excl. delivery costs
- Valve type: Breather Valve
- Material: PA 66 GF 30, GRP (Glass fibre Reinforced Plastic)
- Operating Mode: pneumatic
- Seal Material: HNBR (hydrogenated nitrile butadiene rubber)
- Fitting Position: Engine Block
- Supplementary Article / Supplementary Info: with gasket/seal
- Condition: New
Over 100 in stock
