Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Coil spring Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Top strut mount and bearing Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Suspension kit, coil springs Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Shock absorber dust cover and bump stops Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Suspension kit, shock absorber and coil spring Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Repair kit, wheel suspension Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Spring cap Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Hydraulic oil Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Camber bolts Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Relay, leveling control A4 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Mounting, shock absorbers A4 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Shock absorber mounting brackets A4 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Suspension kit, shock absorber and coil spring Audi A4 B8 Avant 2.0 TFSI flexible fuel 180 hp Petrol/Ethanol
Article №: 1120-0612
Details
-
- Axle Load front axle from [kg]: 1101
- Lowered front axle to [mm]: 30
- Lowered rear axle to [mm]: 30
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- Condition: New
More
Article №: E90-15-011-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
- Vehicle Equipment: for vehicles without level control
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 35
-
- Registration Type: Conditions see certificate, with General Operating Permit (ABE)
- Suspension: for vehicles with standard suspension, for vehicles without lowered suspension, for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1135
- Axle Load rear axle to [kg]: 1170
- EG type approval number to: e13*2007/46*1084*23, e1*2001/116*0430*41
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: E95-15-011-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 35
- Vehicle Equipment: for vehicles without level control
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 45
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles with standard suspension, for vehicles without lowered suspension, for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1140
- Axle Load rear axle to [kg]: 1175
- Product line: B12 Sportline
- Condition: New
More
Article №: 29019-1
Details
-
- Lowered front axle from [mm]: 40
- Lowered front axle to [mm]: 70
- Lowered rear axle from [mm]: 40
- Lowered rear axle to [mm]: 70
- for components see parts list
- Axle Load front axle to [kg]: 1255
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Spring Design: Coil Spring
- Shock Absorber System: Monotube
- Lowered Suspension ca. [mm]: 40-70
- Vehicle type: B8(8K), 4G, 4G+4G1, B8
- Follow installation instructions
- Condition: New
More
Article №: 29092-1
Details
-
- Lowered front axle from [mm]: 30
- Lowered front axle to [mm]: 60
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 60
- for components see parts list
- Axle Load rear axle to [kg]: 1255
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Spring Design: Coil Spring
- Shock Absorber System: Monotube
- Lowered Suspension ca. [mm]: 30-50
- Vehicle type: B8(8K), 4G, 4G+4G1, B8
- Follow installation instructions
- Condition: New
More
Article №: 29019-2
Details
-
- Lowered front axle from [mm]: 40
- Lowered front axle to [mm]: 70
- Lowered rear axle from [mm]: 40
- Lowered rear axle to [mm]: 70
- for components see parts list
- Axle Load front axle from [kg]: 1256
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 29092-2
Details
-
- Lowered front axle from [mm]: 30
- Lowered front axle to [mm]: 60
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 60
- Axle Load rear axle from [kg]: 1256
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: PSS65-15-011-03-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 10-40
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 20-40
-
- Observe service information
- Axle Load front axle to [kg]: 1080
- Axle Load rear axle to [kg]: 1215
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Vehicle Equipment: for vehicles without level control
- Product line: Pro-Street-S
- Follow installation instructions
- Condition: New
More
Article №: PSS65-15-011-04-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 10-40
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 20-40
-
- Observe service information
- Axle Load front axle to [kg]: 1180
- Axle Load rear axle to [kg]: 1215
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Vehicle Equipment: for vehicles without level control
- Product line: Pro-Street-S
- Follow installation instructions
- Condition: New
More
Article №: 48-147231
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1225
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1245
- Lowered Suspension ca. [mm]: 20-50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Mechanically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Product line: - B16 PSS10
- Condition: New
More
Article №: MNE1185N0077
Details
- Bore Diameter [mm]: 25
- Piston Rod Diameter [mm]: 12,4
- Article number of recommended accessories: MK388, PK279
- Weight [kg]: 1,950
- Packaging length [cm]: 60
- Packaging width [cm]: 7,2
- Packaging height [cm]: 7,2
- Customs tariff number: 87088035
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£114,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: KYB1185N0009
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£121,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BLS1185N0030
Details
- Product line: B4 OE Replacement
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£121,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MNE1185N0104
Details
- Bore Diameter [mm]: 30
- Piston Rod Diameter [mm]: 11
- Weight [kg]: 1,200
- Packaging length [cm]: 60
- Packaging width [cm]: 7,2
- Packaging height [cm]: 7,2
- Customs tariff number: 87088035
- Length [mm]: 439, 666
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£123,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MNE1185N0074
Details
- Bore Diameter [mm]: 35
- Piston Rod Diameter [mm]: 18
- Article number of recommended accessories: MK361, PK281
- Weight [kg]: 3,053
- Packaging length [cm]: 61,7
- Packaging width [cm]: 14
- Packaging height [cm]: 14
- Customs tariff number: 87088035
- Length [mm]: 371, 521
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Condition: New
More
£126,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BLS1185N0034
Details
- Product line: B4 OE Replacement
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£128,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SA1185N0029
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£130,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ME1185N0001
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Supplementary Article / Supplementary Info Info 2: without bearing
- Quantity Unit: Set
- Condition: New
More
£138,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ME1185N0003
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Supplementary Article / Supplementary Info Info 2: without bearing
- Quantity Unit: Set
- Condition: New
More
£139,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SA1185N0041
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
Article №: SA1185N0058
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
Article №: KYB1185N0027
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
Article №: KYB1185N0045
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Condition: New
More
Article №: IA MXS162
Details
- Fitting Position: Rear Axle, Front Axle
- Quantity Unit: Set
- Shock Absorber Design: Suspension Strut
- Spring Design: Coil Spring
- Surface: Powder coated
- Shock Absorber System: Height Adjustable
- Shock Absorber Mounting Type: Bottom eye
- Axle Load front axle to [kg]: 1215
- Axle Load rear axle to [kg]: 1240
- Lowered front axle from [mm]: 20
- Lowered front axle to [mm]: 60
- Lowered rear axle from [mm]: 20
- Lowered rear axle to [mm]: 60
- Registration Type: with TÜV® certificate
- Follow installation instructions: +
- Condition: New
More
Article №: 741120
Details
- Product line: BlueLine
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Shock Absorber Design: Suspension Strut
- Spring Design: Coil Spring
- Surface: Powder coated, Galvanically coated
- Shock Absorber System: Height Adjustable
- Axle Load front axle to [kg]: 1215
- Axle Load rear axle to [kg]: 1240
- Lowered front axle from [mm]: 30
- Lowered front axle to [mm]: 50
- Lowered rear axle from [mm]: 20
- Lowered rear axle to [mm]: 50
- Registration Type: with TÜV® certificate
- Follow installation instructions: +
- Condition: New
More
Showing 25 out of 43 products
