Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Coil spring Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Top strut mount and bearing Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Suspension kit, coil springs Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Shock absorber dust cover and bump stops Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Suspension kit, shock absorber and coil spring Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Repair kit, wheel suspension Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Spring cap Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Hydraulic oil Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Camber bolts Audi A4 B8 Avant 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Relay, leveling control A4 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Mounting, shock absorbers A4 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Shock absorber mounting brackets A4 2.0TFSI flexible fuel 180 hp Petrol/Ethanol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Suspension kit, shock absorber and coil spring Audi A4 B8 Avant 2.0 TFSI flexible fuel 180 hp Petrol/Ethanol
Article №: 741121
Details
- Product line: BlueLine
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Shock Absorber Design: Suspension Strut
- Spring Design: Coil Spring
- Surface: Powder coated, Galvanically coated
- Shock Absorber System: Height Adjustable
- Axle Load front axle to [kg]: 1215
- Axle Load rear axle to [kg]: 1240
- Lowered front axle from [mm]: 30
- Lowered front axle to [mm]: 50
- Lowered rear axle from [mm]: 20
- Lowered rear axle to [mm]: 50
- Registration Type: with TÜV® certificate
- Follow installation instructions: +
- Condition: New
More
Article №: 1140-0612
Details
-
- Axle Load front axle from [kg]: 1101
- Lowered front axle to [mm]: 30
- Lowered rear axle to [mm]: 30
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: Twin-Tube, adjustable
- Condition: New
More
Article №: 46-183323
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1135
- Lowered Suspension ca. [mm]: 35
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without level control
- Axle Load [kg] to: 1170
- Lowered Suspension ca. [mm]: 30
-
- Registration Type: Conditions see certificate, with General Operating Permit (ABE)
- Suspension: for vehicles with standard suspension, for vehicles without lowered suspension, for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Product line: - B12 Pro-Kit
- Condition: New
More
Article №: 46-183521
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1130
- Lowered Suspension ca. [mm]: 45
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without level control
- Axle Load [kg] to: 1160
- Lowered Suspension ca. [mm]: 35
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles with standard suspension, for vehicles without lowered suspension, for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Product line: - B12 Sportline
- Condition: New
More
Article №: 841500 000485
Details
- Suspension: Threaded Suspension (height adjustable)
- Shock Absorber System: Adjustable Shock Strength, Height Adjustable, Single Tube Upside Down
- Lowered Suspension from [mm]: 25
- Lowered Suspension to [mm]: 50
- Axle Load front axle to [kg]: 1225
- Axle Load rear axle to [kg]: 1250
- Vehicle Equipment: for vehicles without level control
- Shock Absorber Design: Damper with Rebound Spring
- Product line: Performance
- Condition: New
More
Article №: 49-151282
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1245
- Lowered Suspension ca. [mm]: 20-50
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1225
- Lowered Suspension ca. [mm]: 30-50
-
- Shock Absorber System: Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Product line: - B16 ridecontrol®
- Condition: New
More
Article №: PSM69-15-011-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 25-50
- Axle Load rear axle to [kg]: 1330
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 25-50
- Axle Load front axle to [kg]: 1290
-
- Observe service information
- Suspension: Adjustable Struts (height and performance adjustable)
- Registration Type: with certificate
- Shock Absorber System: Adjustable Shock Strength, Height Adjustable, Single Tube Upside Down
- Vehicle Equipment: for vehicles without level control
- Axle Load front axle to [kg]: 1290
- Axle Load rear axle to [kg]: 1330
- Follow installation instructions
- Condition: New
More
Article №: 49-250534
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1225
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1245
- Lowered Suspension ca. [mm]: 20-50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Electronically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Product line: - B16 iRC
- Condition: New
More
£3239,49
incl. 20% VAT, excl. delivery costs
excl. bulky item surcharge
Not in stock
excl. bulky item surcharge
Details
Article №: 1185S0014
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Supplementary Article / Supplementary Info Info 2: without ball bearing
- Quantity Unit: Set
- Condition: New
More
£48,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 1185S0033
Details
- Shock Absorber Mounting Type: Top pin
- Shock Absorber System: Twin-Tube
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Type: Gas Pressure
- Fitting Position: Front Axle
- Condition: New
More
£61,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SKSAK-5240032
Details
- Shock Absorber Mounting Type: Top pin
- Shock Absorber System: Twin-Tube
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Type: Gas Pressure
- Fitting Position: Front Axle
- Condition: New
More
£70,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SKSAK-5240013
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Supplementary Article / Supplementary Info Info 2: without ball bearing
- Quantity Unit: Set
- Condition: New
More
£82,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: ME1185N0002
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Supplementary Article / Supplementary Info Info 2: without bearing
- Quantity Unit: Set
- Condition: New
More
£129,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: ME1185N0004
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Supplementary Article / Supplementary Info Info 2: without bearing
- Quantity Unit: Set
- Condition: New
More
Article №: BLS1185N0059
Details
- Product line: B4 OE Replacement
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Bottom Plate, Top pin
- Condition: New
More
Article №: BLS1185N0046
Details
- Product line: B4 OE Replacement
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Bottom Plate, Top pin
- Condition: New
More
Article №: 2100-4114
Article №: 2100-4113
Showing 18 out of 43 products
- 1
- 2
