Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
-
Repair kits
- Suspension kit Audi A4 B8 Avant 2.0TDI 120 hp Diesel
- Brake caliper repair kit Audi A4 B8 Avant 2.0TDI 120 hp Diesel
- Guide sleeve kit, brake caliper Audi A4 B8 Avant 2.0TDI 120 hp Diesel
- Repair set, crankcase breather Audi A4 B8 Avant 2.0TDI 120 hp Diesel
- Valve, engine block breather Audi A4 B8 Avant 2.0TDI 120 hp Diesel
- Repair kit, wheel suspension Audi A4 B8 Avant 2.0TDI 120 hp Diesel
- Alternator parts Audi A4 B8 Avant 2.0TDI 120 hp Diesel
- Gear linkage repair kit Audi A4 B8 Avant 2.0TDI 120 hp Diesel
- Gear lever repair kit Audi A4 B8 Avant 2.0TDI 120 hp Diesel
- Repair kit, injection nozzle Audi A4 B8 Avant 2.0TDI 120 hp Diesel
- Anti-roll bar stabiliser kit A4 2.0TDI 120 hp Diesel
- Repair kit, support- / steering link A4 2.0TDI 120 hp Diesel
- Steering rack repair kit A4 2.0TDI 120 hp Diesel
- Fuel pump repair kit A4 2.0TDI 120 hp Diesel
- Gasket set, hydraulic pump A4 2.0TDI 120 hp Diesel
- Starter motor parts A4 2.0TDI 120 hp Diesel
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Valve, engine block breather Audi A4 B8 Avant 2.0 TDI 120 hp Diesel
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
AUDI A4 Avant (8K5, B8) 2.0 TDI year of manufacture 2008, 120 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Valve type: Breather Valve
- Material: PA 66 GF 30, GRP (Glass fibre Reinforced Plastic)
- Opening Pressure [bar]: 0,3
- Filter type: with oil separation function
- Supplementary Article / Supplementary Info: with gasket/seal
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Cylinder Head
- Supplementary Article / Supplementary Info: with seal rings
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Engine Block
- Operating Mode: pneumatic
- Valve type: Breather Valve
- Supplementary Article / Supplementary Info: with gasket/seal
- Seal Material: HNBR (hydrogenated nitrile butadiene rubber)
- Material: GRP (Glass fibre Reinforced Plastic)
- Supplementary Article / Supplementary Info Info 2: with integrated oil separator
- Assy./disassy. by qualified personnel required!
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Version: IAM
- Supplementary Article / Supplementary Info: with gasket/seal
- Operating Mode: Pressure Controlled
- Fitting Position: Cylinder Head
- Alternative Repair Kit: 2385024, 2385072
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Weight [kg]: 1,04
- Seal Material: HNBR (hydrogenated nitrile butadiene rubber)
- Filter type: with oil separation function
- Operating Mode: pneumatic
- Fitting Position: Engine Block, Upper
- New Part
- Always compare old and new part (in particular OE No.)
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Valve type: Breather Valve
- Material: PA 66 GF 30, GRP (Glass fibre Reinforced Plastic)
- Operating Mode: pneumatic
- Seal Material: HNBR (hydrogenated nitrile butadiene rubber)
- Filter type: with oil separation function
- Fitting Position: Engine Block
- Supplementary Article / Supplementary Info: with gasket/seal
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fabrication Number: EPCV-VW-014
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Valve type: Breather Valve
- Material: PA 66 GF 30, GRP (Glass fibre Reinforced Plastic)
- Operating Mode: pneumatic
- Seal Material: HNBR (hydrogenated nitrile butadiene rubber)
- Opening Pressure [bar]: 0,15
- Fitting Position: Engine Block
- Filter type: with oil separation function
- Supplementary Article / Supplementary Info: with gasket/seal
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Weight [kg]: 1,04
- New Part
- Always compare old and new part (in particular OE No.)
- Condition: New
Over 100 in stock
Valve, engine block breather with gasket/seal (LCC)
incl. 20% VAT, excl. delivery costs
- Material: Plastic
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Supplementary Article / Supplementary Info: with gasket/seal
- Condition: New
Over 100 in stock
Valve, engine block breather Engine Block, Breather Valve, with gasket/seal, pneumatic (MAXGEAR)
incl. 20% VAT, excl. delivery costs
- Valve type: Breather Valve
- Material: PA 66 GF 30, GRP (Glass fibre Reinforced Plastic)
- Operating Mode: pneumatic
- Seal Material: HNBR (hydrogenated nitrile butadiene rubber)
- Fitting Position: Engine Block
- Supplementary Article / Supplementary Info: with gasket/seal
- Condition: New
Over 100 in stock
