Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Audi A4 B8 1.8TFSI 120 hp Petrol
- Coil spring Audi A4 B8 1.8TFSI 120 hp Petrol
- Top strut mount and bearing Audi A4 B8 1.8TFSI 120 hp Petrol
- Suspension kit, coil springs Audi A4 B8 1.8TFSI 120 hp Petrol
- Shock absorber dust cover and bump stops Audi A4 B8 1.8TFSI 120 hp Petrol
- Suspension kit, shock absorber and coil spring Audi A4 B8 1.8TFSI 120 hp Petrol
- Repair kit, wheel suspension Audi A4 B8 1.8TFSI 120 hp Petrol
- Spring cap Audi A4 B8 1.8TFSI 120 hp Petrol
- Hydraulic oil Audi A4 B8 1.8TFSI 120 hp Petrol
- Camber bolts Audi A4 B8 1.8TFSI 120 hp Petrol
- Mounting, shock absorbers A4 1.8TFSI 120 hp Petrol
- Relay, leveling control A4 1.8TFSI 120 hp Petrol
- Shock absorber mounting brackets A4 1.8TFSI 120 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Shock absorber Audi A4 B8 1.8 TFSI 120 hp Petrol
Article №: 8045-1265
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- Shock Absorber System: Twin-Tube, Built-in adjustable
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- max. length [mm]: 665
- min. length [mm]: 421
- Colour: red
- Packaging length [cm]: 780
- Packaging width [cm]: 65
- Packaging height [cm]: 65
- Condition: New
More
£ 107,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A-AU-001
Details
- Fitting Position: Front Axle Right
- Shock Absorber System: Electronically adjustable shock strength, Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Braking/Drive Dynamics: for vehicles with Continuous Damping Control (CDC)
- Paired product: A-AU-000
- Fabrication Number: A-AU-001
- Condition: New
More
£ 109,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8250-1048
Details
-
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Bottom eye, Top pin
- max. length [mm]: 526
- min. length [mm]: 346
- Colour: Orange
- Packaging length [cm]: 570
- Packaging width [cm]: 190
- Packaging height [cm]: 190
- Condition: New
More
£ 120,35
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24-145978
Details
- Product line: B6 Performance
- Fitting Position: Rear Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles without electronic suspension control
- Condition: New
More
£ 126,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24-145992
Details
- Product line: B8 Performance Plus
- Fitting Position: Rear Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control
- Condition: New
More
Article №: 8040-1402SPORT
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- Product line: SPORT
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- max. length [mm]: 665
- min. length [mm]: 418
- Colour: yellow
- adjustable: adjustable
- Packaging length [cm]: 780
- Packaging width [cm]: 65
- Packaging height [cm]: 65
- Condition: New
More
Article №: A-1490G
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with standard suspension
- Piston Rod Diameter [mm]: 12,4
- Thread Size: M10x1.5
- Suspension Strut Outer Diameter [mm]: 44, 43,5
- Piston Rod Length [mm]: 298
- Article number of recommended accessories: AK-735450
- Condition: New
More
Article №: A-3796G
Details
-
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- not for vehicle configuration line / variant: S-LINE
-
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- for PR number: 1BE
-
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Model Year to: 2012
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Piston Rod Diameter [mm]: 18
- Supplementary Article / Supplementary Info: without spring seat
- Thread Size: M12x1.25
- Suspension Strut Outer Diameter [mm]: 53
- Piston Rod Length [mm]: 220
- Condition: New
More
Article №: A-AU-000
Details
- Fitting Position: Front Axle Left
- Shock Absorber System: Electronically adjustable shock strength, Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Braking/Drive Dynamics: for vehicles with Continuous Damping Control (CDC)
- Paired product: A-AU-001
- Fabrication Number: A-AU-000
- Condition: New
More
Article №: 24-145985
Details
- Product line: B8 Performance Plus
- Fitting Position: Front Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control
- Condition: New
More
Article №: A-AU-003
Details
- Fitting Position: Rear Axle Right
- Shock Absorber System: Twin-Tube, Electronically adjustable shock strength
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Braking/Drive Dynamics: for vehicles with Continuous Damping Control (CDC)
- Paired product: A-AU-002
- Fabrication Number: A-AU-003
- Condition: New
More
Article №: A-AU-002
Details
- Fitting Position: Rear Axle Left
- Shock Absorber System: Electronically adjustable shock strength, Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Braking/Drive Dynamics: for vehicles with Continuous Damping Control (CDC)
- Paired product: A-AU-003
- Fabrication Number: A-AU-002
- Condition: New
More
Article №: 8245-1264
Details
-
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- Shock Absorber System: Twin-Tube, Built-in adjustable
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Bottom eye, Top pin
- max. length [mm]: 525
- min. length [mm]: 349
- Colour: red
- Packaging length [cm]: 570
- Packaging width [cm]: 190
- Packaging height [cm]: 190
- Condition: New
More
Article №: 8240-1279SPORT
Details
-
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- Product line: SPORT
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Bottom eye, Top pin
- max. length [mm]: 525
- min. length [mm]: 348
- Colour: yellow
- adjustable: adjustable
- Packaging length [cm]: 570
- Packaging width [cm]: 190
- Packaging height [cm]: 190
- Condition: New
More
Article №: 24-145961
Details
- Product line: B6 Performance
- Fitting Position: Front Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles without electronic suspension control
- Condition: New
More
Article №: SK-3842
Details
- Fitting Position: Front Axle Right
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top yoke, Bottom Pin
- Suspension: for vehicles with comfort suspension, for vehicles without electronic suspension control
- Weight [kg]: 8,9
- Replace in pairs only
- Spring Type: for vehicles with coil spring suspension
- Paired product: SK-3843
- Manufactured in: China
- Packaging length [cm]: 68,0
- Packaging width [cm]: 43,5
- Packaging height [cm]: 23,0
- Net weight [kg]: 7,4
- Condition: New
More
Article №: SK-3843
Details
- Fitting Position: Front Axle Left
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top yoke, Bottom Pin
- Suspension: for vehicles with comfort suspension, for vehicles without electronic suspension control
- Weight [kg]: 8,9
- Replace in pairs only
- Spring Type: for vehicles with coil spring suspension
- Paired product: SK-3842
- Manufactured in: China
- Packaging length [cm]: 68,0
- Packaging width [cm]: 43,5
- Packaging height [cm]: 23,0
- Net weight [kg]: 7,4
- Condition: New
More
Article №: MJAS451
Details
-
- Construction Year from: 11/2009
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Left, Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Paired product: MJAS447
- Condition: New
More
Article №: 55131623001
Details
- Fitting Position: Rear Axle Left
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom Pin
- Condition: New
More
Article №: 55131623101
Details
- Fitting Position: Rear Axle Right
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom Pin
- Condition: New
More
Article №: 319 001
Details
- Fitting Position: Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with electronic suspension control
- Parameter: TT32/20X138ED
- Paired product: 319 000
- Condition: New
More
Article №: 319 002
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Rear Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Parameter: TT32/18X214ED
- Paired product: 319 003
- Condition: New
More
Article №: 319 000
Details
- Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with electronic suspension control
- Parameter: TT32/20X138ED
- Paired product: 319 001
- Condition: New
More
Article №: 319 003
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Rear Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Parameter: TT32/18X214ED
- Paired product: 319 002
- Condition: New
More
Article №: 20 455 0181
Details
- Fitting Position: Rear
- Length [mm]: 325
- Colour: black
- Vehicle type: Motorcycle
- Condition: New
More
£ 33,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 264 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
