Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Suspension arm VW T1 Platform 1.6 48 hp Petrol
- Wheel hub VW T1 Platform 1.6 48 hp Petrol
- Wheel bearing VW T1 Platform 1.6 48 hp Petrol
- Engine mount VW T1 Platform 1.6 48 hp Petrol
- Track rod end VW T1 Platform 1.6 48 hp Petrol
- Suspension kit VW T1 Platform 1.6 48 hp Petrol
- Inner tie rod VW T1 Platform 1.6 48 hp Petrol
- Suspension bushes VW T1 Platform 1.6 48 hp Petrol
- Shock absorber dust cover and bump stops VW T1 Platform 1.6 48 hp Petrol
- Steering knuckle VW T1 Platform 1.6 48 hp Petrol
- Anti-roll bar bushes TRANSPORTER 1.6 48 hp Petrol
- Axle bushes TRANSPORTER 1.6 48 hp Petrol
- Wheel bolts and wheel nuts TRANSPORTER 1.6 48 hp Petrol
- Gearbox mount TRANSPORTER 1.6 48 hp Petrol
- Steering rack boot TRANSPORTER 1.6 48 hp Petrol
- Spring cap TRANSPORTER 1.6 48 hp Petrol
- Wheel nuts TRANSPORTER 1.6 48 hp Petrol
- Driver cab suspension TRANSPORTER 1.6 48 hp Petrol
- Nut, stub axle TRANSPORTER 1.6 48 hp Petrol
- Steering knuckle bushing TRANSPORTER 1.6 48 hp Petrol
- Shaft seal, wheel hub TRANSPORTER 1.6 48 hp Petrol
- Subframe TRANSPORTER 1.6 48 hp Petrol
- Towbar / parts
- Wiper and washer system
Suspension bushes VW T1 Platform 1.6 48 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
VW Transporter I Platform / Chassis (26) 1.6 year of manufacture 1964, 48 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Fitting Position: Lower Front Axle, Rear Fitting
- Version: Road Series
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: Control Arm
- Material: PU (Polyurethane)
- Required quantity: 2
- Regulation Ratio: 1°
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, both sides, Rear
- Control/Trailing Arm Type: for control arm
- Quantity per axle: 2
- Article number of recommended accessories: 38398 01
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear, Front Axle Right, Front Axle Left
- Product line: -HD Quality
- Inner Diameter [mm]: 19
- Required quantity: 2
- Height [mm]: 50
- Supplementary Article / Supplementary Info: with holder
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Replace in pairs only
- reinforced version
- with environmental seal: Carbon Neutral
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Lower Front Axle, Front Fitting
- Version: Road Series
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: Control Arm
- Material: PU (Polyurethane)
- Required quantity: 2
Over 100 in stock
incl. 20% VAT, free delivery
- Fitting Position: Front Axle, Lower, inner, both sides
- Supplementary Info: 80 Sha
- Inner Diameter [mm]: 19
- Mounting Type: Rubber-Metal Mount
- Material: PU (Polyurethane)
- Required quantity: 1
- Colour: red
- Condition: New
Over 100 in stock
Trailing arm / Suspension arm bush Rear Axle Left, Lower, Rear Axle Right, Elastomer (FEBI BILSTEIN)
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle Left, Lower, Rear Axle Right
- Inner Diameter [mm]: 12
- Material: Elastomer
- Thickness [mm]: 60
- Diameter [mm]: 42, 25
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Lower Front Axle, Front Fitting
- Version: Road Series
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: Control Arm
- Material: PU (Polyurethane)
- Required quantity: 2
- Diameter [mm]: 30
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Lower Front Axle, Front Fitting
- Version: Road Series
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: Control Arm
- Material: PU (Polyurethane)
- Required quantity: 2
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear, Lower, Front Axle Left, Front Axle Right
- Supplementary Info: Quality
- Inner Diameter [mm]: 13
- Required quantity: 2
- Height [mm]: 41
- Diameter [mm]: 60
- Supplementary Article / Supplementary Info: without holder
- Replace in pairs only
- reinforced version
- with environmental seal: Carbon Neutral
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, Lower, both sides, Rear
- Control/Trailing Arm Type: for control arm
- Quantity per axle: 2
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Lower Front Axle, Rear Fitting
- Version: Road Series
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: Control Arm
- Material: PU (Polyurethane)
- Required quantity: 2
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, Upper, both sides, Front, Rear
- Control/Trailing Arm Type: for control arm
- Quantity per axle: 4
- Condition: New
Over 100 in stock
