Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs VW Scirocco 2 1.6 70 hp Petrol
- Ignition coil VW Scirocco 2 1.6 70 hp Petrol
- Glow plug control module VW Scirocco 2 1.6 70 hp Petrol
- Ignition leads VW Scirocco 2 1.6 70 hp Petrol
- Camshaft sensor VW Scirocco 2 1.6 70 hp Petrol
- Crankshaft sensor VW Scirocco 2 1.6 70 hp Petrol
- Distributor cap VW Scirocco 2 1.6 70 hp Petrol
- Timing cover gasket VW Scirocco 2 1.6 70 hp Petrol
- Distributor rotor VW Scirocco 2 1.6 70 hp Petrol
- Distributor and parts VW Scirocco 2 1.6 70 hp Petrol
- Ignition module SCIROCCO 1.6 70 hp Petrol
- Plug, spark plug SCIROCCO 1.6 70 hp Petrol
- Engine control unit (ECU) SCIROCCO 1.6 70 hp Petrol
- Dust cover, distributor SCIROCCO 1.6 70 hp Petrol
- Vacuum cell, ignition distributor SCIROCCO 1.6 70 hp Petrol
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Spark plugs VW Scirocco 2 1.6 70 hp Petrol
Article №: 686S0041
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 21
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£2,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 229 687
Set 4 - 0 242 229 885, Blister N11 - WR 8 DCX
Details
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 13515
FLR15UC3A
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 1
- Spanner Size: 21
- Spark Plug: with gasket seat, 3 - Earthed Electrode
- contains article number: 13513
- External Thread Size: M14 x 1,25
- Condition: New
More
£4,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: CET8
Details
-
- Required quantity: 4
- Alternatively
- Product line: Aerovantage Spoiler
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Packing Type: Box
- Quality/ Grade: Ti Poly-V
- Technical Information Number: CET8
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
£4,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: UPT8
Details
-
- Required quantity: 4
- Alternatively
- Supplementary Info: ULTRA TITAN
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Quality/ Grade: Poly-V Tit
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Condition: New
More
£5,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 232 505
WR 78 X
Details
- Supplementary Info: Super 4
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 1,1
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Condition: New
More
£6,12
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: OE025/T10
RN8VTYC4, OE025
Details
- Product line: Igniter Industrial
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1
- Spanner Size: 21 mm
- Spark Plug: 3 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Required quantity: 4
- Packing Type: Box
- Quality/ Grade: Nickel GE
- Technical Information Number: RN8VTYC4
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 1
- Resistor to [kOhm]: 2
- Projection [mm]: 1,4
- Condition: New
More
£6,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0002
Details
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,8
- Spark Plug: 3 - Earthed Electrode
- Manufacturer Restriction: V8EC3
- Weight [kg]: 0,062
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£7,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 5932
V-Line 21, BUR5ET-10
Details
- Product line: V-Line
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Thread Size: M14 x 1,25
- TecDoc Engine Number: EWA
- Condition: New
More
£7,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 7264
Details
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Thread Size: M14 x 1,25
- TecDoc Engine Number: EWA
- Condition: New
More
£7,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 232 804
504
Details
- Supplementary Info: Premium 4
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 1,1
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Condition: New
More
£15,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1497
LPG Laser Line 2, LPG2
Details
- Product line: LPG Laser Line
- Engine Code: EWA
- Spanner Size: 20,8 mm
- Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode
- Thread Size: M14 x 1,25
- Fuel Type: CNG/LPG
- Recommended change interval [km]: 60000
- Condition: New
More
£19,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: Z11
14-7 DU, 0001335702
Details
- Product line: ULTRA
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Required quantity: 4
- Self-service suited packaging see parts list
- Technical Information Number: 14-7 DU
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Condition: New
More
£3,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: UX79
Details
- Supplementary Info: ULTRA X
- Thread Length [mm]: 19
- Spanner Size: 21 mm
- Spark Plug: 4 - Earthed Electrode
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Required quantity: 4
- Tightening Torque [Nm]: 25
- Self-service suited packaging see parts list
- Condition: New
More
£4,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: UXT2
0002335607
Details
- Product line: Industrial
- Thread Length [mm]: 19
- Spanner Size: 21 mm
- Spark Plug: 4 - Earthed Electrode
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Required quantity: 4
- Tightening Torque [Nm]: 25
- Self-service suited packaging see parts list
- Version: wahlw. UXT 6
- Condition: New
More
£5,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0 242 230 600
6728, WR 8 DPP 30 X
Details
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£5,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: OE027/T10
RN10VTYC4, OE027
Details
- Product line: Igniter Industrial
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1
- Spanner Size: 21 mm
- Spark Plug: 3 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Required quantity: 4
- Packing Type: Box
- Quality/ Grade: Nickel GE
- Technical Information Number: RN10VTYC4
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 1
- Resistor to [kOhm]: 2
- Projection [mm]: 1,5
- Condition: New
More
£6,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 2335600
0002335600
Details
- Product line: ULTRA X
- Condition: New
More
£6,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0 242 229 557
WR 8 DPX
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£8,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: UX79P
0002335905
Details
- Supplementary Info: ULTRA X PLATIN
- Thread Length [mm]: 19
- Spanner Size: 21 mm
- Spark Plug: 4 - Earthed Electrode
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Required quantity: 4
- Tightening Torque [Nm]: 25
- Self-service suited packaging see parts list
- Condition: New
More
£9,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 246907
RL13L2DMC-1
Details
- Thread Length [mm]: 19
- Engine Code: EP
- Electrode Gap [mm]: 1
- Spanner Size: 21
- Spark Plug: 2 - Earthed Electrode
- Weight [kg]: 0,06
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Condition: New
More
£11,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: EON6/286
EON6
Details
-
- Required quantity: 4
- Alternatively
- Supplementary Info: Screw on
- Thread Length [mm]: 19
- Electrode Gap [mm]: 1
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14x1,25
- Connector type: M4/BRASS SAE
- Version: with gasket seat
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Condition: New
More
£12,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0 242 229 987
WR 8 DCX+, N11
Details
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,0
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£14,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: EON6/287
Details
-
- Required quantity: 4
- Alternatively
- Supplementary Info: Screw on
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Self-service suited packaging see parts list
- Packing Type: Box
- Quality/ Grade: Ni125 GE
- Technical Information Number: EON6
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 14,6
- Packaging width [cm]: 2,58
- Packaging height [cm]: 2,52
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
£15,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: CET8SB
CET8
Details
-
- Required quantity: 4
- Alternatively
- Product line: Aerovantage Spoiler
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Self-service suited packaging see parts list
- Packing Type: Blister Pack
- Quality/ Grade: Ti Poly-V
- Technical Information Number: CET8
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 20
- Packaging width [cm]: 10
- Packaging height [cm]: 3,2
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
£22,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 26 products
