Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Clutch kit VW Santana 32B 1.3 60 hp Petrol
Article №: ADV183008
Details
- Diameter [mm]: 191
- Number of Teeth: 24
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: three-piece
- Weight [kg]: 4,640
- for OE number: 056 198 141 AX
- Observe service information
- Condition: New
More
£68,99
incl. 20% VAT, excl. delivery costs
In stock
Details
You may also be interested in
Article №: 600 0017 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
More
Inside the package:
More
Article №: 835159
Details
- Product line: KIT4P - CONVERSION KIT
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, with clutch release bearing, Requires special tools for mounting
- Supplementary Article / Supplementary Info: with single-mass flywheel
- New Part
- Hub Profile: 22,1 x 20,3
- Weight [kg]: 15,02
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- for flywheel manufacturer: LUK
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
More
Article №: 600 0321 00
Details
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set
- Supplementary Article / Supplementary Info: with central slave cylinder
- Adjustment: with automatic adjustment
- Number of mounting bores: 6
- Condition: New
More
Article №: 835035
Details
- Product line: KIT4P - CONVERSION KIT
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Supplementary Article / Supplementary Info: with single-mass flywheel
- New Part
- Hub Profile: 22,1 x 20,3
- Weight [kg]: 15,6
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
More
Article №: 3000 950 019
Details
- Diameter [mm]: 220
- Number of Teeth: 28
- for components see parts list
- Observe service information
- Condition: New
More
£115,98
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 623 3534 00
Details
- Product line: RepSet
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with clutch disc
- Engine Features/Arrangement: for engines without dual-mass flywheel
- Condition: New
More
Article №: 2290 601 141
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- Condition: New
More
Article №: 624 3408 09
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Inside the package:
- Clutch Pressure Plate 1
- Clutch Disc 1
More
Article №: 620 3322 00
Details
- Product line: RepSet
- Diameter [mm]: 200
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with release fork, with guide sleeve
- Condition: New
More
£111,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 602 0007 00
Details
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with release fork, Requires special tools for mounting
- Transmission Type: Dual-Clutch Transmission
- Clutch Type: for dry clutch
- Observe broschure
- Condition: New
More
Article №: 837060
Details
- Product line: FULLPACK DMF
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, with clutch release bearing
- Supplementary Article / Supplementary Info: with dual-mass flywheel
- New Part
- for flywheel manufacturer: VALEO
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 240
- only available in set
- Condition: New
More
Article №: 2290 601 005
Details
- Product line: DMF Module plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- for components see parts list
- Mounting Type: not pre-mounted
- Condition: New
More
Article №: 837073
Details
- Product line: FULLPACK DMF
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, with clutch release bearing
- Supplementary Article / Supplementary Info: with dual-mass flywheel
- New Part
- Weight [kg]: 15,03
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- only available in set
- Condition: New
More
Article №: 623 3560 00
Details
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, Requires special tools for mounting
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 622 3018 00
Details
- Product line: RepSet
- Diameter [mm]: 220
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with clutch disc
- Condition: New
More
Article №: 602 0006 00
Details
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with release fork, Requires special tools for mounting
- Transmission Type: Dual-Clutch Transmission
- Clutch Type: for dry clutch
- Observe broschure
- Condition: New
More
Article №: 3000 990 020
Details
- Product line: Kit plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- for components see parts list
- Alternative Repair Kit: 3000 844 901
- Condition: New
More
Article №: 3000 951 051
Details
- Diameter [mm]: 190
- Number of Teeth: 28
- for components see parts list
- Condition: New
More
£87,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3000 990 332
Details
- Product line: Kit plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Alternative Repair Kit: 3000 950 070
- Observe service information
- Condition: New
More
Article №: 600 0326 00
Details
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set
- Supplementary Article / Supplementary Info: with central slave cylinder
- Adjustment: with automatic adjustment
- Number of mounting bores: 6
- Condition: New
More
Article №: 602 0001 00
Details
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with release fork, Requires special tools for mounting
- Transmission Type: Dual-Clutch Transmission
- Clutch Type: for dry clutch
- Observe broschure
- Condition: New
More
Article №: 883089 000053
Details
- Product line: Performance
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 600
- Clutch Type: sintered disc with torsion springs
- Condition: New
More
Article №: 2290 601 050
Details
- Product line: ZMS Modul XTend
- Diameter [mm]: 228
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Condition: New
More
Article №: 837344
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 18,33
- Number of mounting bores: 8
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Condition: New
More
