Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs VW Polo 86c 1.0 Cat 45 hp Petrol
- Ignition coil VW Polo 86c 1.0 Cat 45 hp Petrol
- Ignition leads VW Polo 86c 1.0 Cat 45 hp Petrol
- Camshaft sensor VW Polo 86c 1.0 Cat 45 hp Petrol
- Crankshaft sensor VW Polo 86c 1.0 Cat 45 hp Petrol
- Distributor cap VW Polo 86c 1.0 Cat 45 hp Petrol
- Timing cover gasket VW Polo 86c 1.0 Cat 45 hp Petrol
- Distributor rotor VW Polo 86c 1.0 Cat 45 hp Petrol
- Distributor and parts VW Polo 86c 1.0 Cat 45 hp Petrol
- Ignition module VW Polo 86c 1.0 Cat 45 hp Petrol
- Plug, spark plug POLO 1.0 Cat 45 hp Petrol
- Engine control unit (ECU) POLO 1.0 Cat 45 hp Petrol
- Repair kit, distributor POLO 1.0 Cat 45 hp Petrol
- Vacuum cell, ignition distributor POLO 1.0 Cat 45 hp Petrol
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Spark plugs VW Polo 86c 1.0 Cat 45 hp Petrol
Article №: 686S0012
Details
-
- TecDoc Engine Number: ACM
- Construction Year from: 02/1992
- Construction Year to: 12/1992
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
-
- TecDoc Engine Number: AAK
- Construction Year from: 01/1990
- Construction Year to: 08/1990
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£1,16
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0010
Details
-
- TecDoc Engine Number: ACM
- Construction Year from: 02/1992
- Construction Year to: 12/1992
- Required quantity: 4
-
- TecDoc Engine Number: AAK
- Construction Year from: 01/1990
- Construction Year to: 08/1990
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0011
Details
-
- TecDoc Engine Number: AAU
- Construction Year from: 10/1990
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0512
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 3 - Earthed Electrode, with resistor, Connector Type SAE
- Thread Size: M14
- Supplementary Article / Supplementary Info Info 2: with flat seat
- TecDoc Engine Number: AAK, ACM, AAU
- Condition: New
More
£2,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0035
Details
- External Thread [mm]: 14,0
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- TecDoc Engine Number: AAK, ACM
- Condition: New
More
£3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0069
Details
-
- TecDoc Engine Number: ACM
- Construction Year from: 02/1992
- Construction Year to: 12/1992
- Required quantity: 4
-
- TecDoc Engine Number: AAK
- Construction Year from: 01/1990
- Construction Year to: 08/1990
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0310
Details
-
- TecDoc Engine Number: AAU
- Construction Year from: 10/1990
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0070
Details
-
- TecDoc Engine Number: ACM
- Construction Year from: 02/1992
- Construction Year to: 12/1992
-
- TecDoc Engine Number: AAK
- Construction Year from: 01/1990
- Construction Year to: 08/1990
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£11,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0319
Details
- External Thread [mm]: 14,0
- Product line: V-Line
- Thread Length [mm]: 19,0
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- TecDoc Engine Number: AAK, ACM
- Condition: New
More
£15,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990011
Details
-
- TecDoc Engine Number: ACM
- Construction Year from: 02/1992
- Construction Year to: 12/1992
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
-
- TecDoc Engine Number: AAK
- Construction Year from: 01/1990
- Construction Year to: 08/1990
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£1,10
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-19990510
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 3 - Earthed Electrode, with resistor, Connector Type SAE
- Thread Size: M14
- Supplementary Article / Supplementary Info Info 2: with flat seat
- TecDoc Engine Number: AAK, ACM, AAU
- Condition: New
More
£1,41
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990010
Details
-
- TecDoc Engine Number: AAU
- Construction Year from: 10/1990
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990009
Details
-
- TecDoc Engine Number: ACM
- Construction Year from: 02/1992
- Construction Year to: 12/1992
- Required quantity: 4
-
- TecDoc Engine Number: AAK
- Construction Year from: 01/1990
- Construction Year to: 08/1990
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8EH 188 704-171
CH8P-8
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1,25
- Tightening Torque [Nm]: 28
- TecDoc Engine Number: ACM
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£2,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0011P
Details
-
- TecDoc Engine Number: AAU
- Construction Year from: 10/1990
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£2,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: W20EP-U
D4
Details
-
- TecDoc Engine Number: AAK, ACM, AAU
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spanner Size: 20.6 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Connector type: Removable SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 56
- for OE number: 09482-00392
- alternative item: W20TT
- Condition: New
More
£2,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 13508
FLR13UC3
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 21
- Spark Plug: with gasket seat, 3 - Earthed Electrode
- for OE number: 101 000 007 AD
- TecDoc Engine Number: ACM, AAK
- contains article number: 13507
- External Thread Size: M14 x 1,25
- Condition: New
More
£2,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0010P
Details
-
- TecDoc Engine Number: ACM
- Construction Year from: 02/1992
- Construction Year to: 12/1992
- Required quantity: 4
-
- TecDoc Engine Number: AAK
- Construction Year from: 01/1990
- Construction Year to: 08/1990
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£2,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0011
Details
-
- TecDoc Engine Number: ACM
- Construction Year from: 02/1992
- Construction Year to: 12/1992
-
- TecDoc Engine Number: AAK
- Construction Year from: 01/1990
- Construction Year to: 08/1990
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,7
- Spark Plug: 1 - Earthed Electrode
- Length [mm]: 126
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0006
Details
-
- TecDoc Engine Number: ACM
- Construction Year from: 02/1992
- Construction Year to: 12/1992
-
- Construction Year from: 01/1990
- Construction Year to: 08/1990
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,9
- Spark Plug: 3 - Earthed Electrode
- Weight [kg]: 0,06
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£4,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 205 043
WR7DC+, 14R-7DU
Details
- Spark Plug: 1 - Earthed Electrode
- Supplementary Article / Supplementary Info Info 2: Do not fit parts from different manufacturers!
- for OE number: 12 14 807
- Condition: New
More
£4,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 107 124
14-8DTU
Details
- Spark Plug: 3 - Earthed Electrode
- Supplementary Article / Supplementary Info Info 2: Do not fit parts from different manufacturers!
- Condition: New
More
£4,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 107 123
W7DTC, 14-7DTU
Details
- Spark Plug: 3 - Earthed Electrode
- Supplementary Article / Supplementary Info Info 2: Do not fit parts from different manufacturers!
- Condition: New
More
£4,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0001
Details
-
- TecDoc Engine Number: AAU
- Construction Year from: 10/1990
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,7
- Spark Plug: 1 - Earthed Electrode
- Weight [kg]: 0,06
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£4,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0069P
Details
-
- TecDoc Engine Number: ACM
- Construction Year from: 02/1992
- Construction Year to: 12/1992
- Required quantity: 4
-
- TecDoc Engine Number: AAK
- Construction Year from: 01/1990
- Construction Year to: 08/1990
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£11,95
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 116 products
Show the next items
- 1
- 2
- 3
- 4
- 5
