Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs Passat 3b2 1.8 Syncro/4motion 125 hp Petrol
- Ignition coil Passat 3b2 1.8 Syncro/4motion 125 hp Petrol
- Glow plug control module Passat 3b2 1.8 Syncro/4motion 125 hp Petrol
- Ignition leads Passat 3b2 1.8 Syncro/4motion 125 hp Petrol
- Camshaft sensor Passat 3b2 1.8 Syncro/4motion 125 hp Petrol
- Crankshaft sensor Passat 3b2 1.8 Syncro/4motion 125 hp Petrol
- Timing cover gasket Passat 3b2 1.8 Syncro/4motion 125 hp Petrol
- Knock sensor Passat 3b2 1.8 Syncro/4motion 125 hp Petrol
- Distributor and parts Passat 3b2 1.8 Syncro/4motion 125 hp Petrol
- Plug, spark plug Passat 3b2 1.8 Syncro/4motion 125 hp Petrol
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Spark plugs Passat 3b2 1.8 Syncro/4motion 125 hp Petrol
Article №: CET2
Details
-
- Required quantity: 4
- Alternatively
- Product line: Aerovantage Spoiler
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Connector type: SAE
- Packing Type: Box
- Quality/ Grade: Ti Poly-V
- Technical Information Number: CET2
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
£4,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: UPT2
Details
-
- Required quantity: 4
- Alternatively
- Supplementary Info: ULTRA TITAN
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Quality/ Grade: Poly-V Tit
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Condition: New
More
£4,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8EH 188 705-071
PM8RC-10
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 1,0
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1.25
- Tightening Torque [Nm]: 25
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: K20PBR-S10
D76
Details
-
- TecDoc Engine Number: APT, ARG, ADR
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spanner Size: 16 mm
- Spark Plug: 3 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Connector type: Removable SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 43
- for OE number: 101-000-033AA
- alternative item: K20TT
- Condition: New
More
£5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: OE032/T10
RC8VTYC4, OE032
Details
- Product line: Igniter Industrial
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Spark Plug: 3 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: SAE
- Required quantity: 4
- Packing Type: Box
- Quality/ Grade: Nickel GE
- Technical Information Number: RC8VTYC4
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 1
- Resistor to [kOhm]: 2
- Projection [mm]: 1,5
- Condition: New
More
£5,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 232 502
FR 78 X
Details
-
- Construction Year from: 06/1997
- Required quantity: 4
- Supplementary Info: Super 4
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Condition: New
More
£6,12
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0081P
Details
-
- Construction Year from: 06/1997
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Condition: New
More
£6,23
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 2397
BKUR6ET-10
Details
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Electrode Gap [mm]: 1,0
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat, Fixed SAE connector
- Thread Size: M14 x 1,25
- Condition: New
More
£6,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 5135
BCPR5ET
Details
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Spanner Size: 16 mm
- Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
- Thread Size: M14 x 1,25
- Condition: New
More
£6,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: Z90
14 FGH-7 DTURX, 0001335107
Details
-
- TecDoc Engine Number: ARG, ADR, APT
- Required quantity: 4
- Product line: ULTRA
- Thread Length [mm]: 19
- Electrode Gap [mm]: 1
- Spanner Size: 16mm
- Thread Size: M14x1.25
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Resistor from [kOhm]: 1
- Resistor to [kOhm]: 3
- Packaging length [cm]: 9
- Packaging height [cm]: 2
- Packaging width [cm]: 2
- Condition: New
More
£6,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0028P
Details
-
- Construction Year from: 06/1997
- Fuel Type: CNG/LPG
- Replace after km: 30000
- Required quantity: 4
- Product line: Iridium
- Thread Length [mm]: 19
- Spark Position [mm]: 3,3
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Spark Plug: Iridium Middle Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Resistor [kOhm]: 6
- Condition: New
More
£7,04
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0013
Details
-
- Construction Year from: 06/1997
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,8
- Spark Plug: 3 - Earthed Electrode
- Weight [kg]: 0,052
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£7,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3045
V-Line 24
Details
- Product line: V-Line
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Electrode Gap [mm]: 1,0
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat, Fixed SAE connector
- Thread Size: M14 x 1,25
- Condition: New
More
£7,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 96723
Blister 26 - 4R
Details
- Supplementary Info: BLISTER
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Electrode Gap [mm]: 1,0
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat, Fixed SAE connector
- Thread Size: M14 x 1,25
- Condition: New
More
£7,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 062709000076
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with resistor
- Thread Size: M14 x 1.25
- TecDoc Engine Number: ADR, APT, ARG
- Condition: New
More
£7,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1462
Set 4 - EAN 85 95001 , DR15YS-9
Details
- Thread Length 1 [mm]: 19
- Engine Code: ADR, APT, ARG
- Electrode Gap [mm]: 0,90
- Spanner Size: 16 mm
- Spark Plug: Silver Center Electrode
- Thread Size: M14x1,25
- Tightening Torque [Nm]: 25
- Number of pins: 1
- Fuel Type: Petrol/Liquified Petroleum Gas (LPG), CNG
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0007
Details
- External Thread [mm]: M14 x 1,25
- Product line: Q+, original equipment manufacturer quality
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: 3 - Earthed Electrode
- Construction Year from: 06/1997
- Weight [kg]: 0,044
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£9,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: APP3923
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3,40
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Spark Plug: Control electrode gap, Interference Suppression, 1 - Earthed Electrode, with gasket seat
- Thread Pitch [mm]: 1,25
- Connector type: SAE
- Weight [kg]: 0,05
- Resistor [kOhm]: 5
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Condition: New
More
£9,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0034P
Details
-
- TecDoc Engine Number: APT, ARG, ADR
- Required quantity: 4
- Fuel Type: CNG/LPG
- Product line: Iridium
- Thread Length [mm]: 19
- Spark Position [mm]: 3,5
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Platinum mass electrode, Iridium Middle Electrode
- Thread Size: M14x1.25
- Connector type: Solid SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Resistor [kOhm]: 6
- Country Specific Design: Japan
- Condition: New
More
£9,96
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: CCH9802
OE179, 9802
Details
-
- Required quantity: 4
- Alternatively
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode
- Thread Size: M14x1.25
- Connector type: SAE
- Packing Type: Box
- Quality/ Grade: Pt GE
- Technical Information Number: RC8WYPB4
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 9,5
- Packaging width [cm]: 2,5
- Packaging height [cm]: 2,1
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
£9,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8EH 188 706-071
IM8RC-10P
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 1,0
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1.25
- Tightening Torque [Nm]: 25
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£10,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-19990318
Details
- External Thread [mm]: 14,0
- Product line: V-Line
- Thread Length [mm]: 19,0
- Electrode Gap [mm]: 1,0
- Spanner Size: 16 mm
- Spark Plug: Fixed SAE connector, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Condition: New
More
£11,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0029P
Details
- Product line: Iridium
- Thread Length [mm]: 19
- Spark Position [mm]: 3,5
- Spanner Size: 16 mm
- Spark Plug: Fixed SAE connector, Iridium Middle Electrode, Platinum mass electrode, Interference Suppression 5 kOhm
- Thread Size: M14 x 1,25
- Fuel Type: CNG/LPG
- Recommended change interval [km]: 60000
- Condition: New
More
£12,35
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCF860032
Details
-
- Construction Year from: 06/1997
- Fuel Type: CNG/LPG
- Replace after km: 30000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£20,24
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCF860033
Details
- Product line: LPG Laser Line
- Spanner Size: 16 mm
- Spark Plug: Fixed SAE connector
- Thread Size: M14 x 1,25
- Fuel Type: CNG/LPG
- Recommended change interval [km]: 60000
- Condition: New
More
£23,61
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 106 products
Show the next items
- 1
- 2
- 3
- 4
- 5
