Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs VW Passat B4 35i 1.8 75 hp Petrol
- Ignition coil VW Passat B4 35i 1.8 75 hp Petrol
- Glow plug control module VW Passat B4 35i 1.8 75 hp Petrol
- Ignition leads VW Passat B4 35i 1.8 75 hp Petrol
- Camshaft sensor VW Passat B4 35i 1.8 75 hp Petrol
- Crankshaft sensor VW Passat B4 35i 1.8 75 hp Petrol
- Distributor cap VW Passat B4 35i 1.8 75 hp Petrol
- Timing cover gasket VW Passat B4 35i 1.8 75 hp Petrol
- Distributor rotor VW Passat B4 35i 1.8 75 hp Petrol
- Distributor and parts VW Passat B4 35i 1.8 75 hp Petrol
- Ignition module PASSAT 1.8 75 hp Petrol
- Plug, spark plug PASSAT 1.8 75 hp Petrol
- Engine control unit (ECU) PASSAT 1.8 75 hp Petrol
- Repair kit, distributor PASSAT 1.8 75 hp Petrol
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Spark plugs VW Passat B4 35i 1.8 75 hp Petrol
Article №: 97725
Blister 28 - 4R, BUR5ET
Details
- Supplementary Info: BLISTER
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Thread Size: M14 x 1,25
- TecDoc Engine Number: AAM
- Condition: New
More
£6,43
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: U-SERIE-MS-22
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 1
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 3
- Diameter 1 [mm]: 2,7
- Net weight [kg]: 0,26
- Gross Weight [kg]: 0,26
- Condition: New
More
-44%
compared to RRP:
£18,08
£10,11
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990069
Details
-
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£11,03
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 235 909
S1-4
Details
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£11,69
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: IW16TT
Details
-
- TecDoc Engine Number: AAM
- Required quantity: 4
- Fuel Type: CNG/LPG
- Product line: Iridium TT
- Thread Length [mm]: 19
- Spark Plug: with resistor, 1 - Earthed Electrode, Iridium Middle Electrode, Platinum mass electrode
- Thread Size: M14x1.25
- Diameter [mm]: 14
- Gross Weight [g]: 61
- alternative item: IW16TT
- Condition: New
More
£11,95
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 232 804
504, WR 78 X
Details
- Supplementary Info: Premium 4
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 1,1
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Condition: New
More
£14,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1497
LPG Laser Line 2, LPG2
Details
- Product line: LPG Laser Line
- Spanner Size: 20,8 mm
- Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode
- Thread Size: M14 x 1,25
- Fuel Type: CNG/LPG
- Recommended change interval [km]: 60000
- TecDoc Engine Number: AAM
- Condition: New
More
-31%
compared to RRP:
£26,78
£18,39
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0004
Details
-
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,7
- Spark Plug: 1 - Earthed Electrode
- Diameter [mm]: 25
- Length [mm]: 85
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
-68%
compared to RRP:
£3,23
£1,02
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 107 851
W8LTCR
Details
- Spark Plug: 3 - Earthed Electrode
- Supplementary Article / Supplementary Info Info 2: Do not fit parts from different manufacturers!
- Condition: New
More
-54%
compared to RRP:
£7,13
£3,21
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: A1514110
Details
- Spark Plug: Nickel-Copper Center Electrode
- Weight [kg]: 0,057
- Height [mm]: 20
- Width [mm]: 23
- Condition: New
More
£3,21
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: V99-75-0027
Details
-
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Product line: Q+, original equipment manufacturer quality
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,7
- Spanner Size: 21
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1,25
- Weight [kg]: 0,056
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£3,21
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0 242 235 529
Set 4 - 0 242 235 909, Blister N02 - WR 7 DC
Details
-
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£4,13
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 246887
RL13L2DMC
Details
- Thread Length [mm]: 19
- Engine Code: AAM
- Electrode Gap [mm]: 0,9
- Spanner Size: 21
- Spark Plug: 2 - Earthed Electrode
- Weight [kg]: 0,06
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Condition: New
More
£4,13
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 519 136
Details
- Engine Code: AAM
- Spanner Size: 21 mm
- Tightening Torque [Nm]: 25
- Number of pins: 3
- Condition: New
More
£4,13
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SKSP-1990034
Details
- External Thread [mm]: 14,0
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Condition: New
More
-25%
compared to RRP:
£6,20
£4,59
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: UX79
Details
- Supplementary Info: ULTRA X
- Thread Length [mm]: 19
- Spanner Size: 21 mm
- Spark Plug: 4 - Earthed Electrode
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Required quantity: 4
- Tightening Torque [Nm]: 25
- Self-service suited packaging see parts list
- Condition: New
More
£4,59
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: Z92
14 GH-8 DTUR, 0001330113
Details
- Product line: ULTRA
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 21 mm
- Spark Plug: 3 - Earthed Electrode, with gasket seat
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Required quantity: 4
- Self-service suited packaging see parts list
- Technical Information Number: 14 GH-8 DTUR
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Condition: New
More
-59%
compared to RRP:
£12,61
£5,05
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: UXT2
0002335607
Details
- Product line: Industrial
- Thread Length [mm]: 19
- Spanner Size: 21 mm
- Spark Plug: 4 - Earthed Electrode
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Required quantity: 4
- Tightening Torque [Nm]: 25
- Self-service suited packaging see parts list
- Version: wahlw. UXT 6
- Condition: New
More
£5,05
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 1348
LR17TC-1
Details
- Thread Length 1 [mm]: 19
- Engine Code: AAM
- Electrode Gap [mm]: 1
- Spanner Size: 21 mm
- Spark Plug: Nickel-Copper Center Electrode
- Thread Size: M14x1,25
- Tightening Torque [Nm]: 25
- Number of pins: 3
- Fuel Type: Petrol
- Replace after km: 60000
- Condition: New
More
£5,51
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: OE027/T10
RN10VTYC4, OE027
Details
- Product line: Igniter Industrial
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1
- Spanner Size: 21 mm
- Spark Plug: 3 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Required quantity: 4
- Packing Type: Box
- Quality/ Grade: Nickel GE
- Technical Information Number: RN10VTYC4
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 1
- Resistor to [kOhm]: 2
- Projection [mm]: 1,5
- Condition: New
More
-24%
compared to RRP:
£7,92
£5,97
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 2335600
0002335600
Details
- Product line: ULTRA X
- Condition: New
More
£5,97
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 062130010312
CW5LP, W16TT
Details
- Thread Length [mm]: 19
- Spanner Size: 20.6
- Spark Plug: 1 - Earthed Electrode, with resistor
- Thread Size: 14
- TecDoc Engine Number: AAM
- Condition: New
More
£6,89
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 246194
70 H3E
Details
-
- Construction Year from: 10/1991
- Construction Year to: 10/1993
- Engine Code: AAM
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 21
- Spark Plug: 3 - Earthed Electrode
- Weight [kg]: 0,065
- Condition: New
More
£6,89
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: U-SERIE-MS-4
Details
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Diameter 1 [mm]: 2,7
- Production Number: U-SERIE-MS-4
- Net weight [kg]: 0,20
- Gross Weight [kg]: 0,20, 0,2
- Condition: New
More
-22%
compared to RRP:
£9,44
£7,35
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: XP64
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3,40
- Electrode Gap [mm]: 1,1
- Spanner Size: 21
- Spark Plug: Control electrode gap, Interference Suppression, 1 - Earthed Electrode, with gasket seat
- Thread Pitch [mm]: 1,25
- electrode gap to be set [mm]: 0,8
- Connector type: SAE
- Weight [kg]: 0,07
- Resistor [kOhm]: 5
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Condition: New
More
£7,35
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 72 products
Show the next items
- 1
- 2
- 3
