Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs VW LT 55 Platform 2.4i 94 hp Petrol
- Ignition coil VW LT 55 Platform 2.4i 94 hp Petrol
- Glow plug control module VW LT 55 Platform 2.4i 94 hp Petrol
- Camshaft sensor VW LT 55 Platform 2.4i 94 hp Petrol
- Ignition leads VW LT 55 Platform 2.4i 94 hp Petrol
- Crankshaft sensor VW LT 55 Platform 2.4i 94 hp Petrol
- Distributor cap VW LT 55 Platform 2.4i 94 hp Petrol
- Timing cover gasket VW LT 55 Platform 2.4i 94 hp Petrol
- Distributor rotor VW LT 55 Platform 2.4i 94 hp Petrol
- Distributor and parts VW LT 55 Platform 2.4i 94 hp Petrol
- Ignition module LT 2.4i 94 hp Petrol
- Plug, spark plug LT 2.4i 94 hp Petrol
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Spark plugs VW LT 55 Platform 2.4 i 94 hp Petrol
Article №: 686S0010
Details
-
- Construction Year to: 04/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
-55%
compared to RRP:
£ 4,10
£ 1,83
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0011
Details
-
- Construction Year to: 04/1996
- Required quantity: 6
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
-41%
compared to RRP:
£ 3,90
£ 2,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0069
Details
-
- Construction Year to: 04/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 7,35
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0310
Details
-
- Construction Year to: 04/1996
- Required quantity: 6
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 9,19
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0070
Details
-
- Construction Year to: 04/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 11,03
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990009
Details
-
- Construction Year to: 04/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
-55%
compared to RRP:
£ 4,10
£ 1,83
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990010
Details
-
- Construction Year to: 04/1996
- Required quantity: 6
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
-41%
compared to RRP:
£ 3,90
£ 2,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8EH 188 704-171
CH8P-8
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1,25
- Tightening Torque [Nm]: 28
- TecDoc Engine Number: 1E
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£ 2,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 13447
FL13WC1
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,72
- Spanner Size: 21
- Spark Plug: with gasket seat, 1 - Earthed Electrode
- Weight [kg]: 0,03
- contains article number: 13445
- External Thread Size: M14 x 1,25
- Condition: New
More
£ 2,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990136
Details
-
- Engine Code: 1E
- Fuel Type: CNG/LPG
- Required quantity: 6
- Product line: Iridium TT
- Thread Length [mm]: 19
- Spanner Size: 20.6
- Spark Plug: 1 - Earthed Electrode, Iridium Middle Electrode
- Thread Size: M14x1.25
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Condition: New
More
£ 2,63
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: W20EP-U
D4
Details
-
- TecDoc Engine Number: 1E
- Required quantity: 6
- Product line: Nickel
- Thread Length [mm]: 19
- Spanner Size: 20.6 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Connector type: Removable SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 56
- for OE number: 09482-00392
- alternative item: W20TT
- Condition: New
More
-12%
compared to RRP:
£ 3,13
£ 2,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 13508
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 21
- Spark Plug: with gasket seat, 3 - Earthed Electrode
- for OE number: 101 000 007 AD
- contains article number: 13507
- External Thread Size: M14 x 1,25
- Condition: New
More
-74%
compared to RRP:
£ 10,76
£ 2,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0010P
Details
-
- Construction Year to: 04/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£ 2,88
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0011P
Details
-
- Construction Year to: 04/1996
- Required quantity: 6
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£ 2,96
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 235 663
Set 4 - 0 242 235 909, Blister N02 - WR 7 DC
Details
-
- Construction Year to: 04/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 3,21
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 229 656
Set 4 - 0 242 229 880, Blister N07 - WR 8 DC
Details
-
- Construction Year to: 04/1996
- Required quantity: 6
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 3,21
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0011
Details
-
- Construction Year to: 04/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,7
- Spark Plug: 1 - Earthed Electrode
- Length [mm]: 126
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
-32%
compared to RRP:
£ 5,46
£ 3,67
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 91406
Blister 01 - 4R, BP6ES
Details
- Supplementary Info: BLISTER
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Spanner Size: 20,8 mm
- Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, no interference suppression, with gasket seat
- Thread Size: M14 x 1,25
- TecDoc Engine Number: 1E
- Condition: New
More
£ 3,67
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 4263
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3,30
- Electrode Gap [mm]: 0,76
- Spanner Size: 21
- Spark Plug: Control electrode gap, Interference Suppression, 1 - Earthed Electrode, with gasket seat
- Thread Pitch [mm]: 1,25
- Connector type: SAE
- Weight [kg]: 0,07
- Resistor [kOhm]: 8
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Condition: New
More
£ 3,67
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 13509
FLR13UC3
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 21
- Spark Plug: with gasket seat, 3 - Earthed Electrode
- for OE number: 101 000 007 AD
- External Thread Size: M14 x 1,25
- Condition: New
More
£ 4,17
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0001
Details
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,7
- Spark Plug: 1 - Earthed Electrode
- Construction Year to: 04/1996
- Weight [kg]: 0,06
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£ 4,59
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: W20TT
T02
Details
-
- TecDoc Engine Number: 1E
- Required quantity: 6
- Product line: Nickel TT
- Thread Length [mm]: 19
- Spanner Size: 20.6 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Connector type: Crimped SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 58
- alternative item: IW20, IW20TT, IW20
- Condition: New
More
-14%
compared to RRP:
£ 5,34
£ 4,59
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: CET8
Details
-
- Required quantity: 6
- Alternatively
- Product line: Aerovantage Spoiler
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Packing Type: Box
- Quality/ Grade: Ti Poly-V
- Technical Information Number: CET8
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
-51%
compared to RRP:
£ 10,48
£ 5,05
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 7639
BP6ESZ
Details
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Spanner Size: 20,8 mm
- Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, no interference suppression, with gasket seat
- Thread Size: M14 x 1,25
- TecDoc Engine Number: 1E
- Condition: New
More
-34%
compared to RRP:
£ 7,67
£ 5,05
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990068
Details
-
- Construction Year to: 04/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 6
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 7,35
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 81 products
Show the next items
- 1
- 2
- 3
- 4
