Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs VW Jetta 2 1.3 Cat 55 hp Petrol
- Ignition coil VW Jetta 2 1.3 Cat 55 hp Petrol
- Glow plug control module VW Jetta 2 1.3 Cat 55 hp Petrol
- Camshaft sensor VW Jetta 2 1.3 Cat 55 hp Petrol
- Ignition leads VW Jetta 2 1.3 Cat 55 hp Petrol
- Crankshaft sensor VW Jetta 2 1.3 Cat 55 hp Petrol
- Distributor cap VW Jetta 2 1.3 Cat 55 hp Petrol
- Timing cover gasket VW Jetta 2 1.3 Cat 55 hp Petrol
- Distributor rotor VW Jetta 2 1.3 Cat 55 hp Petrol
- Distributor and parts VW Jetta 2 1.3 Cat 55 hp Petrol
- Ignition module JETTA 1.3 Cat 55 hp Petrol
- Plug, spark plug JETTA 1.3 Cat 55 hp Petrol
- Engine control unit (ECU) JETTA 1.3 Cat 55 hp Petrol
- Repair kit, distributor JETTA 1.3 Cat 55 hp Petrol
- Vacuum cell, ignition distributor JETTA 1.3 Cat 55 hp Petrol
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Spark plugs VW Jetta 2 1.3 Cat 55 hp Petrol
Article №: 686S0010
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0012
Details
-
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 2,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0035
Details
-
- Construction Year from: 08/1989
- Construction Year to: 08/1991
- Engine Code: 2G
-
- Electrode Gap [mm]: 0,8
- Construction Year to: 08/1988
- Engine Code: MH, NZ
- External Thread [mm]: 14,0
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Condition: New
More
£ 3,22
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0512
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 3 - Earthed Electrode, with resistor, Connector Type SAE
- Thread Size: M14
- Supplementary Article / Supplementary Info Info 2: with flat seat
- TecDoc Engine Number: MH, NZ, 2G
- Condition: New
More
£ 4,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0069
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0310
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 9,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0070
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 11,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0319
Details
-
- Construction Year from: 08/1989
- Construction Year to: 08/1991
- Engine Code: 2G
-
- Electrode Gap [mm]: 0,8
- Construction Year to: 08/1988
- Engine Code: MH , NZ
- External Thread [mm]: 14,0
- Product line: V-Line
- Thread Length [mm]: 19,0
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Condition: New
More
£ 12,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990011
Details
-
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 1,26
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-19990510
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 3 - Earthed Electrode, with resistor, Connector Type SAE
- Thread Size: M14
- Supplementary Article / Supplementary Info Info 2: with flat seat
- TecDoc Engine Number: MH, NZ, 2G
- Condition: New
More
£ 1,82
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990009
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8EH 188 704-171
CH8P-8
Details
-
- Construction Year from: 09/1988
- Construction Year to: 07/1989
- TecDoc Engine Number: NZ
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1,25
- Tightening Torque [Nm]: 28
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£ 2,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 13447
FL13WC1
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,72
- Spanner Size: 21
- Spark Plug: with gasket seat, 1 - Earthed Electrode
- Weight [kg]: 0,03
- contains article number: 13445
- External Thread Size: M14 x 1,25
- Condition: New
More
£ 2,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0010P
Details
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Required quantity: 4
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£ 2,90
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: W20EP-U
D4
Details
-
- TecDoc Engine Number: MH, NZ, 2G
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spanner Size: 20.6 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Connector type: Removable SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 56
- for OE number: 09482-00392
- alternative item: W20TT
- Condition: New
More
£ 2,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 91406
Blister 01 - 4R, BP6ES
Details
-
- Electrode Gap [mm]: 0,7
- Construction Year from: 09/1988
- Construction Year to: 07/1989
- TecDoc Engine Number: MH, NZ
- Supplementary Info: BLISTER
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Spanner Size: 20,8 mm
- Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, no interference suppression, with gasket seat
- Thread Size: M14 x 1,25
- Condition: New
More
£ 2,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 235 663
Set 4 - 0 242 235 909, Blister N02 - WR 7 DC
Details
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 3,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0035P
Details
-
- Construction Year from: 08/1989
- Construction Year to: 08/1991
- Engine Code: 2G
-
- Electrode Gap [mm]: 0,8
- Construction Year to: 08/1988
- Engine Code: MH, NZ
- Product line: Nickel
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,0
- Electrode Gap [mm]: 1,1
- Spanner Size: 20,8 mm
- Spark Plug: Nickel-Copper Center Electrode, 3 - Earthed Electrode, with gasket seat, Nickel Middle Electrode
- Thread Size: M14 x 1,25
- Resistor [kOhm]: 6
- Condition: New
More
£ 3,78
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0011
Details
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,7
- Spark Plug: 1 - Earthed Electrode
- electrode gap to be set [mm]: 0,7
- Length [mm]: 126
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£ 3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 4263
Details
-
- Construction Year from: 09/1988
- Construction Year to: 07/1989
- TecDoc Engine Number: MH, NZ
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3,30
- Electrode Gap [mm]: 0,76
- Spanner Size: 21
- Spark Plug: Control electrode gap, Interference Suppression, 1 - Earthed Electrode, with gasket seat
- Thread Pitch [mm]: 1,25
- Connector type: SAE
- Weight [kg]: 0,07
- Resistor [kOhm]: 8
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Condition: New
More
£ 3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 240 592
Set 4 - 0 242 240 849, Blister N15 - WR 6 DC
Details
-
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0006
Details
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,9
- Spark Plug: 3 - Earthed Electrode
- electrode gap to be set [mm]: 0,7
- Weight [kg]: 0,06
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£ 4,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 205 043
WR7DC+, 14R-7DU
Details
- Spark Plug: 1 - Earthed Electrode
- Supplementary Article / Supplementary Info Info 2: Do not fit parts from different manufacturers!
- for OE number: 12 14 807
- Condition: New
More
£ 4,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990136
Details
-
- Engine Code: 2G, MH, NZ
- Fuel Type: CNG/LPG
- Required quantity: 4
- Product line: Iridium TT
- Thread Length [mm]: 19
- Spanner Size: 20.6
- Spark Plug: 1 - Earthed Electrode, Iridium Middle Electrode
- Thread Size: M14x1.25
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Condition: New
More
£ 4,80
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 7100512
Details
- Thread Length [mm]: 19
- Spark Position [mm]: 5,2
- Spanner Size: 20
- Spark Plug: Nickel Middle Electrode, 3 - Earthed Electrode
- Condition: New
More
£ 5,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 93 products
Show the next items
- 1
- 2
- 3
- 4
