Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Golf BA5 1.0TSI 110 hp Petrol
- Coil spring Golf BA5 1.0TSI 110 hp Petrol
- Top strut mount and bearing Golf BA5 1.0TSI 110 hp Petrol
- Suspension kit, coil springs Golf BA5 1.0TSI 110 hp Petrol
- Shock absorber dust cover and bump stops Golf BA5 1.0TSI 110 hp Petrol
- Boot, air suspension Golf BA5 1.0TSI 110 hp Petrol
- Suspension kit, shock absorber and coil spring Golf BA5 1.0TSI 110 hp Petrol
- Spring cap Golf BA5 1.0TSI 110 hp Petrol
- Hydraulic oil Golf BA5 1.0TSI 110 hp Petrol
- Camber bolts Golf BA5 1.0TSI 110 hp Petrol
- Relay, leveling control GOLF 1.0TSI 110 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Suspension kit, shock absorber and coil spring Golf BA5 1.0 TSI 110 hp Petrol
Article №: MNE1185N0080
Details
- Observe technical data
- Bore Diameter [mm]: 25
- Piston Rod Diameter [mm]: 12,4
- Sleeve Length [mm]: 45
- Weight [kg]: 1,800
- Packaging length [cm]: 50,5
- Packaging width [cm]: 6,5
- Packaging height [cm]: 6,5
- Customs tariff number: 87088035
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
Article №: ME1185N0099
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
Article №: MNE1185N0010
Details
- Length [mm]: 382, 549
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Supplementary Article / Supplementary Info Info 2: with rolling bearing
- Condition: New
More
Article №: SA1185N0053
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
Article №: 741168
Details
- Product line: BlueLine
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Shock Absorber Design: Suspension Strut
- Spring Design: Coil Spring
- Surface: Powder coated
- Shock Absorber System: Height Adjustable
- Axle Load front axle to [kg]: 1080
- Axle Load rear axle to [kg]: 1060
- Lowered front axle from [mm]: 30
- Lowered front axle to [mm]: 65
- Lowered rear axle from [mm]: 40
- Lowered rear axle to [mm]: 65
- Registration Type: with TÜV® certificate
- Follow installation instructions: +
- Condition: New
More
Article №: 741191
Details
- Product line: BlueLine
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Shock Absorber Design: Suspension Strut
- Spring Design: Coil Spring
- Surface: Powder coated
- Shock Absorber System: Height Adjustable
- Axle Load front axle to [kg]: 1080
- Axle Load rear axle to [kg]: 1060
- Lowered front axle from [mm]: 35
- Lowered front axle to [mm]: 65
- Lowered rear axle from [mm]: 40
- Lowered rear axle to [mm]: 65
- Suspension Strut Outer Diameter [mm]: for 50, 55
- Registration Type: with TÜV® certificate
- Follow installation instructions: +
- Condition: New
More
Article №: 741192
Details
- Product line: BlueLine
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Shock Absorber Design: Suspension Strut
- Spring Design: Coil Spring
- Surface: Powder coated
- Shock Absorber System: Height Adjustable
- Axle Load front axle to [kg]: 965
- Axle Load rear axle to [kg]: 1060
- Lowered front axle from [mm]: 30
- Lowered front axle to [mm]: 65
- Lowered rear axle from [mm]: 40
- Lowered rear axle to [mm]: 65
- Registration Type: with TÜV® certificate
- Follow installation instructions: +
- Condition: New
More
Article №: 46-259073
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1150
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 985
- for PR number: G01
- Lowered Suspension ca. [mm]: 30-40
-
- Registration Type: Conditions see certificate, with General Operating Permit (ABE)
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Product line: - B12 Pro-Kit
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 751168
Details
- Product line: NJT eXtrem
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Shock Absorber Design: Suspension Strut
- Spring Design: Coil Spring
- Surface: Powder coated
- Shock Absorber System: Height Adjustable, Mechanically adjustable shock strength
- Axle Load front axle to [kg]: 1080
- Axle Load rear axle to [kg]: 1060
- Lowered front axle from [mm]: 35
- Lowered front axle to [mm]: 65
- Lowered rear axle from [mm]: 40
- Lowered rear axle to [mm]: 65
- Registration Type: with TÜV® certificate
- Follow installation instructions: +
- Condition: New
More
Article №: 1140-8406-1
Details
-
- Braking/Drive Dynamics: for vehicles without DCC suspension
- Axle Load front axle from [kg]: 1011
- Lowered front axle to [mm]: 30
- Lowered rear axle to [mm]: 45
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: Twin-Tube, adjustable
- Axle: Multi-link Axle
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 1140-8406
Details
-
- Braking/Drive Dynamics: for vehicles without DCC suspension
- Axle Load front axle from [kg]: 1011
- Lowered front axle to [mm]: 30
- Lowered rear axle to [mm]: 45
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: Twin-Tube, adjustable
- Axle: Multi-link Axle
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 1120-8405-1
Details
-
- Braking/Drive Dynamics: for vehicles without DCC suspension
- Axle Load front axle to [kg]: 1010
- Lowered front axle to [mm]: 30
- Lowered rear axle to [mm]: 45
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- Axle: Multi-link Axle
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 1120-8406
Details
-
- Braking/Drive Dynamics: for vehicles without DCC suspension
- Axle Load front axle from [kg]: 1011
- Lowered front axle to [mm]: 35
- Lowered rear axle to [mm]: 45
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- Axle: Multi-link Axle
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: PSS65-15-021-14-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 35-65
- Axle Load rear axle to [kg]: 1050
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 35-65
- Axle Load front axle to [kg]: 965
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Suspension Strut Outer Diameter [mm]: 50
- Axle: Multi-link Axle
- Vehicle Equipment: for vehicles without level control
- Product line: Pro-Street-S
- Follow installation instructions
- Condition: New
More
Article №: 47-229945
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1253
- for PR number: 0N1
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- for PR number: G01
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 50
- Product line: - B14 PSS
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 46-262493
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1050
- for PR number: 0N1
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 985
- for PR number: G02
- Lowered Suspension ca. [mm]: 30-40
-
- Registration Type: Conditions see certificate, with General Operating Permit (ABE)
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Product line: - B12 Pro-Kit
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 46-259134
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1050
- for PR number: 0N1
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 985
- for PR number: G01
- Lowered Suspension ca. [mm]: 30-40
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Product line: - B12 Pro-Kit
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 47-342941
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1260
- Lowered Suspension ca. [mm]: 10-40
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- Lowered Suspension ca. [mm]: 20-35
-
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Axle: Multi-link Axle
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable)
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 46-262462
Details
-
- Fitting Position: Rear Axle
- Axle: Multi-link Axle
- Axle Load [kg] to: 1150
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 985
- for PR number: G02
- Lowered Suspension ca. [mm]: 30-40
-
- Registration Type: Conditions see certificate, with General Operating Permit (ABE)
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Product line: - B12 Pro-Kit
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 47-309067
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1260
- Lowered Suspension ca. [mm]: 10-40
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- Lowered Suspension ca. [mm]: 20-35
-
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 55
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 47-313750
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1255
- Lowered Suspension ca. [mm]: 10-40
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- Lowered Suspension ca. [mm]: 20-35
-
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 50
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 47-313767
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1065
- Lowered Suspension ca. [mm]: 20-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1120
- Lowered Suspension ca. [mm]: 30-50
-
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 50
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 48-609073
Details
-
- Fitting Position: Rear Axle
- Axle: Multi-link Axle
- Axle Load [kg] to: 1253
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- for PR number: G02
- Lowered Suspension ca. [mm]: 30-40
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Mechanically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 47-313774
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1065
- Lowered Suspension ca. [mm]: 20-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1120
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 55
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 48-254960
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1253
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- for PR number: G01
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Adjustable Shock Strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 50
- Product line: - B16 PSS10
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Showing 25 out of 62 products
Show the next items
- 1
- 2
- 3
