Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber VW Golf Sportsvan 1.0TSI 110 hp Petrol
- Coil spring VW Golf Sportsvan 1.0TSI 110 hp Petrol
- Top strut mount and bearing VW Golf Sportsvan 1.0TSI 110 hp Petrol
- Suspension kit, coil springs VW Golf Sportsvan 1.0TSI 110 hp Petrol
- Shock absorber dust cover and bump stops VW Golf Sportsvan 1.0TSI 110 hp Petrol
- Boot, air suspension VW Golf Sportsvan 1.0TSI 110 hp Petrol
- Suspension kit, shock absorber and coil spring VW Golf Sportsvan 1.0TSI 110 hp Petrol
- Repair kit, wheel suspension VW Golf Sportsvan 1.0TSI 110 hp Petrol
- Spring cap VW Golf Sportsvan 1.0TSI 110 hp Petrol
- Hydraulic oil VW Golf Sportsvan 1.0TSI 110 hp Petrol
- Camber bolts GOLF 1.0TSI 110 hp Petrol
- Relay, leveling control GOLF 1.0TSI 110 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Suspension kit, shock absorber and coil spring VW Golf Sportsvan 1.0 TSI 110 hp Petrol
Article №: E90-79-010-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
- Axle Load rear axle to [kg]: 1150
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30-40
- Axle Load front axle to [kg]: 985
-
- Observe service information
- Registration Type: with General Operating Permit (ABE)
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Suspension Strut Outer Diameter [mm]: 50
- Axle: Multi-link Axle
- Suspension: for vehicles without electronic suspension control
- Axle Load rear axle to [kg]: 1150
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: E90-79-010-03-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
- Axle Load rear axle to [kg]: 1050
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30-40
- Axle Load front axle to [kg]: 985
-
- Observe service information
- Registration Type: with General Operating Permit (ABE)
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Suspension Strut Outer Diameter [mm]: 50
- Axle: Twist-beam Rear Axle
- Suspension: for vehicles without electronic suspension control
- Axle Load rear axle to [kg]: 1050
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: E90-79-010-05-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
- Axle Load rear axle to [kg]: 1150
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30-40
- Axle Load front axle to [kg]: 985
-
- Observe service information
- Registration Type: with General Operating Permit (ABE)
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Suspension Strut Outer Diameter [mm]: 55
- Axle: Multi-link Axle
- Suspension: for vehicles without electronic suspension control
- Axle Load rear axle to [kg]: 1150
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: E90-79-010-07-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
- Axle Load rear axle to [kg]: 1050
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30-40
- Axle Load front axle to [kg]: 985
-
- Observe service information
- Registration Type: with General Operating Permit (ABE)
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Suspension Strut Outer Diameter [mm]: 55
- Axle: Twist-beam Rear Axle
- Suspension: for vehicles without electronic suspension control
- Axle Load rear axle to [kg]: 1050
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: 47-251588
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1220
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1160
- for PR number: G02
- Lowered Suspension ca. [mm]: 30-50
-
- only in connection with: 14-292330
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 55
- Product line: - B14 PSS
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 47-229952
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1065
- for PR number: 0N1
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1090
- for PR number: G02
- Lowered Suspension ca. [mm]: 30-50
-
- only in connection with: 14-292330
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 55
- Product line: - B14 PSS
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 47-254954
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1220
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1160
- for PR number: G01
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 50
- Product line: - B14 PSS
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 48-230032
Details
-
- Fitting Position: Rear Axle
- for PR number: 0N1
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- for PR number: G01
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Mechanically adjustable shock strength
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 50
- Product line: - B16 PSS10
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 49-255874
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- for PR number: G01, G04
- Lowered Suspension ca. [mm]: 30-50
-
- only in connection with: 14-292330
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Electronically adjustable shock strength, Built-in adjustable
- Suspension: for vehicles with electronic suspension control, Threaded Suspension (height adjustable)
- Suspension Strut Outer Diameter [mm]: 55
- Product line: - B16 Damptronic®
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 49-279641
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- for PR number: G02, G04
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Electronically adjustable shock strength
- Registration Type: Conditions see certificate
- Suspension: for vehicles with electronic suspension control, Threaded Suspension (height adjustable)
- Suspension Strut Outer Diameter [mm]: 55
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: ME1185N0099
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
Article №: MNE1185N0010
Details
- Length [mm]: 382, 549
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Supplementary Article / Supplementary Info Info 2: with rolling bearing
- Condition: New
More
Article №: SA1185N0062
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
Article №: KYB1185N0004
Details
- Fitting Position: Front Axle, Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
Article №: IA MXS689
Details
- Fitting Position: Rear Axle, Front Axle
- Quantity Unit: Set
- Shock Absorber Design: Suspension Strut
- Spring Design: Coil Spring
- Surface: Powder coated
- Shock Absorber System: Height Adjustable
- Shock Absorber Mounting Type: Bottom eye
- Axle Load front axle to [kg]: 965
- Axle Load rear axle to [kg]: 960
- Lowered front axle from [mm]: 35
- Lowered front axle to [mm]: 65
- Lowered rear axle from [mm]: 40
- Lowered rear axle to [mm]: 65
- Registration Type: with TÜV® certificate
- Follow installation instructions: +
- Condition: New
More
Article №: IA MXS705
Details
- Fitting Position: Rear Axle, Front Axle
- Quantity Unit: Set
- Shock Absorber Design: Suspension Strut
- Spring Design: Coil Spring
- Surface: Powder coated
- Shock Absorber System: Height Adjustable
- Shock Absorber Mounting Type: Bottom eye
- Axle Load front axle to [kg]: 965
- Axle Load rear axle to [kg]: 960
- Lowered front axle from [mm]: 35
- Lowered front axle to [mm]: 65
- Lowered rear axle from [mm]: 40
- Lowered rear axle to [mm]: 65
- Registration Type: with TÜV® certificate
- Follow installation instructions: +
- Condition: New
More
Article №: 46-259073
Details
-
- Fitting Position: Rear Axle
- Axle: Multi-link Axle
- Axle Load [kg] to: 1075
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 985
- for PR number: G01
- Lowered Suspension ca. [mm]: 35
-
- Registration Type: Conditions see certificate, with General Operating Permit (ABE)
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Product line: - B12 Pro-Kit
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 47-229945
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1065
- for PR number: 0N1
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1090
- for PR number: G01
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 50
- Product line: - B14 PSS
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 47-229969
Details
-
- Fitting Position: Rear Axle
- Axle: 014
- Axle Load [kg] to: 1220
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1160
- for PR number: G01
- Lowered Suspension ca. [mm]: 30-50
-
- Registration Type: Conditions see certificate
- Shock Absorber Type: Gas Pressure
- Suspension: Threaded Suspension (height adjustable)
- Suspension Strut Outer Diameter [mm]: 50
- Product line: - B14 PSS
- Condition: New
More
Article №: 47-229976
Details
-
- Fitting Position: Rear Axle
- Axle: 014
- Axle Load [kg] to: 1220
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1160
- for PR number: G02
- Lowered Suspension ca. [mm]: 30-50
-
- Registration Type: Conditions see certificate
- Shock Absorber Type: Gas Pressure
- Suspension: Threaded Suspension (height adjustable)
- Suspension Strut Outer Diameter [mm]: 55
- Product line: - B14 PSS
- Condition: New
More
Article №: 46-262493
Details
-
- Fitting Position: Rear Axle
- Axle: Rigid Axle
- Axle Load [kg] to: 1050
- for PR number: 0N1
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 985
- for PR number: G02
- Lowered Suspension ca. [mm]: 30-40
-
- only in connection with: 14-292330
- Registration Type: Conditions see certificate, with General Operating Permit (ABE)
- Shock Absorber Type: Gas Pressure
- Product line: - B12 Pro-Kit
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 46-259134
Details
-
- Fitting Position: Rear Axle
- Axle: Rigid Axle
- Axle Load [kg] to: 1050
- for PR number: 0N1
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 985
- for PR number: G01
- Lowered Suspension ca. [mm]: 30-40
-
- Registration Type: Conditions see certificate, with General Operating Permit (ABE)
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Product line: - B12 Pro-Kit
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 47-342941
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 980
- Lowered Suspension ca. [mm]: 10-40
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1090
- Lowered Suspension ca. [mm]: 20-35
-
- only in connection with: 14-292330
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Axle: Multi-link Axle
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable)
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 46-262462
Details
-
- Fitting Position: Rear Axle
- Axle: Multi-link Axle
- Axle Load [kg] to: 1150
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 985
- for PR number: G02
- Lowered Suspension ca. [mm]: 30-40
-
- only in connection with: 14-292330
- Registration Type: Conditions see certificate, with General Operating Permit (ABE)
- Shock Absorber Type: Gas Pressure
- Product line: - B12 Pro-Kit
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 47-309067
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 980
- Lowered Suspension ca. [mm]: 10-40
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1090
- Lowered Suspension ca. [mm]: 20-35
-
- only in connection with: 14-292330
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 55
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Showing 25 out of 42 products
