Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Golf Plus 1.6 BiFuel 102 hp Petrol/Liquified Petroleum Gas (LPG)
- Coil spring Golf Plus 1.6 BiFuel 102 hp Petrol/Liquified Petroleum Gas (LPG)
- Top strut mount and bearing Golf Plus 1.6 BiFuel 102 hp Petrol/Liquified Petroleum Gas (LPG)
- Suspension kit, coil springs Golf Plus 1.6 BiFuel 102 hp Petrol/Liquified Petroleum Gas (LPG)
- Shock absorber dust cover and bump stops Golf Plus 1.6 BiFuel 102 hp Petrol/Liquified Petroleum Gas (LPG)
- Boot, air suspension Golf Plus 1.6 BiFuel 102 hp Petrol/Liquified Petroleum Gas (LPG)
- Suspension kit, shock absorber and coil spring Golf Plus 1.6 BiFuel 102 hp Petrol/Liquified Petroleum Gas (LPG)
- Repair kit, wheel suspension Golf Plus 1.6 BiFuel 102 hp Petrol/Liquified Petroleum Gas (LPG)
- Spring cap Golf Plus 1.6 BiFuel 102 hp Petrol/Liquified Petroleum Gas (LPG)
- Camber bolts Golf Plus 1.6 BiFuel 102 hp Petrol/Liquified Petroleum Gas (LPG)
- Mounting, shock absorbers GOLF 1.6 BiFuel 102 hp Petrol/Liquified Petroleum Gas (LPG)
- Relay, leveling control GOLF 1.6 BiFuel 102 hp Petrol/Liquified Petroleum Gas (LPG)
- Shock absorber mounting brackets GOLF 1.6 BiFuel 102 hp Petrol/Liquified Petroleum Gas (LPG)
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Suspension kit, shock absorber and coil spring Golf Plus 1.6 BiFuel 102 hp Petrol/Liquified Petroleum Gas (LPG)
Article №: 1120-2613
Details
-
- not for vehicle configuration line / variant: Cross
- Axle Load front axle to [kg]: 1020
- Lowered front axle to [mm]: 35
- Lowered rear axle to [mm]: 35
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- for RPO number: DQ017
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 1120-2614
Details
-
- not for vehicle configuration line / variant: Cross
- Axle Load front axle from [kg]: 1021
- Lowered front axle to [mm]: 35
- Lowered rear axle to [mm]: 35
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- for RPO number: DQ018
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 1120-2611
Details
-
- not for vehicle configuration line / variant: Cross
- Axle Load front axle to [kg]: 1020
- Lowered front axle to [mm]: 35
- Lowered rear axle to [mm]: 35
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- for RPO number: DQ015
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 1120-2612
Details
-
- not for vehicle configuration line / variant: Cross
- Axle Load front axle from [kg]: 1021
- Lowered front axle to [mm]: 35
- Lowered rear axle to [mm]: 35
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- for RPO number: DQ016
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 1140-2614
Details
-
- not for vehicle configuration line / variant: Cross
- Axle Load front axle from [kg]: 1021
- Lowered front axle to [mm]: 35
- Lowered rear axle to [mm]: 35
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: Twin-Tube, adjustable
- for RPO number: DQ061
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 1140-2613
Details
-
- not for vehicle configuration line / variant: Cross
- Axle Load front axle to [kg]: 1020
- Lowered front axle to [mm]: 35
- Lowered rear axle to [mm]: 35
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: Twin-Tube, adjustable
- for RPO number: DQ060
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 29258-1
Details
-
- Lowered front axle from [mm]: 30
- Lowered front axle to [mm]: 60
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 60
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Spring Design: Coil Spring
- Shock Absorber System: Monotube
- Lowered Suspension ca. [mm]: 30-60
- Vehicle type: 8P, 8PA, 8PB, 5P, 5PN, 1P, 1PN, 1Z, 1K, 1KM, 1KP, 3CC
- Suspension Strut Outer Diameter [mm]: 55
- Follow installation instructions
- Condition: New
More
Article №: 29258-2
Details
-
- Lowered front axle from [mm]: 30
- Lowered front axle to [mm]: 60
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 60
- for components see parts list
- Suspension Strut Outer Diameter [mm]: 50
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 48-135245
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1100
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1210
- for PR number: G07, G08
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Mechanically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Product line: - B16 PSS10
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: ME1185N0026
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£120,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ME1185N0027
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£120,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ME1185N0025
Details
- Product line: -ORIGINAL Quality
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£122,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BLS1185N0036
Details
- Housing diameter in clamping area [mm]: 55
- Product line: B4 OE Replacement
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Bottom Plate, Top pin
- Condition: New
More
£131,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SA1185N0014
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
£134,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SA1185N0051
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
Article №: IA MXS675
Details
- Fitting Position: Rear Axle, Front Axle
- Quantity Unit: Set
- Shock Absorber Design: Suspension Strut
- Spring Design: Coil Spring
- Surface: Powder coated
- Shock Absorber System: Height Adjustable
- Shock Absorber Mounting Type: Bottom eye
- Axle Load front axle to [kg]: 1105
- Axle Load rear axle to [kg]: 1230
- Lowered front axle from [mm]: 20
- Lowered front axle to [mm]: 60
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 75
- Registration Type: with TÜV® certificate
- Follow installation instructions: +
- Condition: New
More
Article №: 1120-0085
Details
-
- Construction Year from: 07/2009
- Construction Year to: 06/2013
- Axle Load front axle to [kg]: 980
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- for RPO number: DQ006
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 1120-0086
Details
-
- Construction Year from: 07/2009
- Construction Year to: 06/2013
- Axle Load front axle from [kg]: 981
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- for RPO number: DQ007
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 1120-0087
Details
-
- Construction Year from: 07/2009
- Construction Year to: 06/2013
- Axle Load front axle from [kg]: 1021
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- for RPO number: DQ008
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 1120-0081
Details
-
- Construction Year from: 07/2009
- Construction Year to: 06/2013
- Axle Load front axle from [kg]: 981
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- for RPO number: DQ002
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 1120-0082
Details
-
- Construction Year from: 07/2009
- Construction Year to: 06/2013
- Axle Load front axle from [kg]: 1021
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- for RPO number: DQ003
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 1120-0080
Details
-
- Construction Year from: 07/2009
- Construction Year to: 06/2013
- Axle Load front axle to [kg]: 980
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- for RPO number: DQ001
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 751055
Details
- Product line: NJT eXtrem
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Shock Absorber Design: Suspension Strut
- Spring Design: Coil Spring
- Surface: Powder coated
- Shock Absorber System: Height Adjustable, Mechanically adjustable shock strength
- Suspension Strut Outer Diameter [mm]: for 50, 55
- Axle Load front axle to [kg]: 1200
- Axle Load rear axle to [kg]: 1250
- Lowered front axle from [mm]: 20
- Lowered front axle to [mm]: 60
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 60
- Registration Type: with TÜV® certificate
- Follow installation instructions: +
- Condition: New
More
Article №: 751054
Details
- Product line: NJT eXtrem
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Shock Absorber Design: Suspension Strut
- Spring Design: Coil Spring
- Surface: Powder coated
- Shock Absorber System: Height Adjustable, Mechanically adjustable shock strength
- Suspension Strut Outer Diameter [mm]: for 50, 55
- Axle Load front axle to [kg]: 1105
- Axle Load rear axle to [kg]: 1250
- Lowered front axle from [mm]: 20
- Lowered front axle to [mm]: 60
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 60
- Registration Type: with TÜV® certificate
- Follow installation instructions: +
- Condition: New
More
Article №: 1140-0087
Details
-
- Construction Year from: 07/2009
- Construction Year to: 06/2013
- Axle Load front axle from [kg]: 1021
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: Twin-Tube, adjustable
- for RPO number: DQ037
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Showing 25 out of 45 products
