Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Suspension arm VW Derby 86 0.9 40 hp Petrol
- Wheel hub VW Derby 86 0.9 40 hp Petrol
- Wheel bearing VW Derby 86 0.9 40 hp Petrol
- Top strut mount and bearing VW Derby 86 0.9 40 hp Petrol
- Anti-roll bar link VW Derby 86 0.9 40 hp Petrol
- Engine mount VW Derby 86 0.9 40 hp Petrol
- Track rod end VW Derby 86 0.9 40 hp Petrol
- Suspension kit VW Derby 86 0.9 40 hp Petrol
- Inner tie rod VW Derby 86 0.9 40 hp Petrol
- ABS sensor VW Derby 86 0.9 40 hp Petrol
- Ball joint DERBY 0.9 40 hp Petrol
- Suspension bushes DERBY 0.9 40 hp Petrol
- Shock absorber dust cover and bump stops DERBY 0.9 40 hp Petrol
- Steering knuckle DERBY 0.9 40 hp Petrol
- Anti-roll bar bushes DERBY 0.9 40 hp Petrol
- Axle bushes DERBY 0.9 40 hp Petrol
- Wheel bolts and wheel nuts DERBY 0.9 40 hp Petrol
- Gearbox mount DERBY 0.9 40 hp Petrol
- Steering rack boot DERBY 0.9 40 hp Petrol
- Spring cap DERBY 0.9 40 hp Petrol
- Mounting kit, control lever DERBY 0.9 40 hp Petrol
- Leaf spring DERBY 0.9 40 hp Petrol
- Nut, stub axle DERBY 0.9 40 hp Petrol
- Steering knuckle bushing DERBY 0.9 40 hp Petrol
- Shock absorber mounting brackets DERBY 0.9 40 hp Petrol
- Towbar / parts
- Wiper and washer system
Suspension kit VW Derby 86 0.9 40 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
VW DERBY (86) 0.9 year of manufacture 1977, 40 hp vehicle parts products
incl. 20% VAT, free delivery
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: with coupling rod
- Steering: with tie rod ends
- Observe service information
- Supplementary Info: OE Turbo NEW
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Fitting Position: Front axle both sides
- Weight [kg]: 11
- Supplementary Article / Supplementary Info Info 2: with coupling rod
- Steering: with tie rod ends
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Fitting Position: Front Axle
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, Lower
- reinforced version
- Supplementary Article / Supplementary Info Info 2: with ball joint, with fastening material, with rubber mount
- Cone Pitch: 1:10
- External Thread [mm]: M16x1,5
- Required quantity: 1
- Quality: HPS standard
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right, Lower
- Paired product: 53280
- Supplementary Article / Supplementary Info Info 2: with lock screw set, with ball joint, with rubber mount
- Required quantity: 1
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right, Front Axle Left, Lower
- Control/Trailing Arm Type: Control Arm
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint, with suspension rod
- Material: Sheet Steel
- Cone Size [mm]: 19
- Required quantity: 2
- Supplementary Info: ORIGINAL Quality
- replacement in pairs recommended
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front axle both sides, Lower
- Supplementary Article / Supplementary Info Info 2: with ball joint, with fastening material, without axle joint, with coupling rod
- Steering: with tie rod ends
- Required quantity: 1
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front axle both sides, Lower
- Supplementary Article / Supplementary Info Info 2: with ball joint, with fastening material, with rubber mount
- Cone Size [mm]: 19
- Required quantity: 2
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Cone Size [mm]: 20
- Packing Type: Box
- Packaging length [cm]: 51
- Packaging width [cm]: 44,5
- Packaging height [cm]: 15
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Fitting Position: Front Axle
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front axle both sides
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: without ball joint, with fastening material, with rubber mount, with coupling rod
- Required quantity: 2
- Condition: New
Over 100 in stock
