Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Suspension arm VW Crafter 30-35 2.5TDI 109 hp Diesel
- Wheel hub VW Crafter 30-35 2.5TDI 109 hp Diesel
- Wheel bearing VW Crafter 30-35 2.5TDI 109 hp Diesel
- Top strut mount and bearing VW Crafter 30-35 2.5TDI 109 hp Diesel
- Anti-roll bar link VW Crafter 30-35 2.5TDI 109 hp Diesel
- Engine mount VW Crafter 30-35 2.5TDI 109 hp Diesel
- Track rod end VW Crafter 30-35 2.5TDI 109 hp Diesel
- Suspension kit VW Crafter 30-35 2.5TDI 109 hp Diesel
- Inner tie rod VW Crafter 30-35 2.5TDI 109 hp Diesel
- ABS sensor VW Crafter 30-35 2.5TDI 109 hp Diesel
- Ball joint CRAFTER 2.5TDI 109 hp Diesel
- Suspension bushes CRAFTER 2.5TDI 109 hp Diesel
- Shock absorber dust cover and bump stops CRAFTER 2.5TDI 109 hp Diesel
- Steering knuckle CRAFTER 2.5TDI 109 hp Diesel
- Tyre pressure sensor (TPMS) CRAFTER 2.5TDI 109 hp Diesel
- Anti-roll bar bushes CRAFTER 2.5TDI 109 hp Diesel
- Axle bushes CRAFTER 2.5TDI 109 hp Diesel
- Wheel bolts and wheel nuts CRAFTER 2.5TDI 109 hp Diesel
- Gearbox mount CRAFTER 2.5TDI 109 hp Diesel
- Repair kit, wheel suspension CRAFTER 2.5TDI 109 hp Diesel
- Steering rack boot CRAFTER 2.5TDI 109 hp Diesel
- Camber bolts CRAFTER 2.5TDI 109 hp Diesel
- Wheel nuts CRAFTER 2.5TDI 109 hp Diesel
- Driver cab suspension CRAFTER 2.5TDI 109 hp Diesel
- Leaf spring CRAFTER 2.5TDI 109 hp Diesel
- Mounting, shock absorbers CRAFTER 2.5TDI 109 hp Diesel
- Anti-roll bar stabiliser kit CRAFTER 2.5TDI 109 hp Diesel
- Repair kit, support- / steering link CRAFTER 2.5TDI 109 hp Diesel
- Subframe CRAFTER 2.5TDI 109 hp Diesel
- Shock absorber mounting brackets CRAFTER 2.5TDI 109 hp Diesel
- Bracket, stabilizer mounting CRAFTER 2.5TDI 109 hp Diesel
- Lateral and longitudinal acceleration sensor CRAFTER 2.5TDI 109 hp Diesel
- Towbar / parts
- Wiper and washer system
Wheel hub VW Crafter 30-35 2.5 TDI 109 hp Diesel
Article №: 1141402800
Details
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor, with wheel bearing
- Number of Holes: 6
- Braking/Drive Dynamics: for vehicles with ABS
- Condition: New
More
-18%
compared to RRP:
£133,55
£108,34
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1151403200
Details
- Fitting Position: Rear Axle Left, Rear Axle Right
- Supplementary Article / Supplementary Info Info 2: with wheel bearing
- Number of Holes: 6
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Condition: New
More
-25%
compared to RRP:
£175,41
£130,19
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 654W0895
Details
- Fitting Position: Front Axle, Front axle both sides
- Suspension: for vehicles without heavy duty suspension
- Diameter [mm]: 152
- Condition: New
More
-44%
compared to RRP:
£56,60
£31,15
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V46-0804
Details
- Supplementary Info: EXPERT KITS +
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 65
- Diameter [mm]: 100
- Width [mm]: 23,0
- Weight [kg]: 1,26
- Packaging width [cm]: 15,4
- Packaging height [cm]: 9,3
- Packaging Depth [cm]: 15,4
- Condition: New
More
£20,45
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V10-2118
Details
- Supplementary Info: EXPERT KITS +
- Fitting Position: Rear Axle
- for OE number: 291501 319 B
- Packaging height [cm]: 9,8
- Packaging Depth [cm]: 9,8
- Condition: New
More
-70%
compared to RRP:
£76,73
£22,78
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 014 750 0002
Details
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Rear Axle
- Height 1 [mm]: 24,75
- Supplementary Article / Supplementary Info Info 2: with shaft seal
- Vehicle type: Crafter 30, Crafter 35, Crafter 32
- Diameter [mm]: 90
- Inner Diameter 2 [mm]: 50, 55
- Bearing Type: Tapered Roller Bearing
- Outer Diameter 2 [mm]: 90
- Height 2 [mm]: 23
- Condition: New
More
-32%
compared to RRP:
£48,83
£33,01
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 02.32.165
Details
- Fitting Position: Rear Axle both sides
- for OE number: 002 981 6605 cpl.1
- Condition: New
More
£34,40
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKWB-0181043
Details
- Fitting Position: Front Axle, Front axle both sides
- Suspension: for vehicles without heavy duty suspension
- Diameter [mm]: 152
- Condition: New
More
£56,26
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: KLP-ME-024
Details
- Fitting Position: Front Axle, Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring
- Diameter [mm]: 152
- Width [mm]: 118
- Fabrication Number: KLP-ME-024
- Condition: New
More
-5%
compared to RRP:
£60,02
£56,72
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 10L9064-JPN
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] from: 1850
- Diameter [mm]: 152,00, 96,00
- Width [mm]: 108,40
- Condition: New
More
-18%
compared to RRP:
£70,92
£58,12
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 33-0870
Details
- Fitting Position: Front Axle
- Diameter [mm]: 152
- Rim Hole Number: 6
- Bearing Type: Ball Bearing
- Condition: New
More
£58,58
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GT24-217
Details
- Fitting Position: Front Axle Left, Front Axle Right
- Inner Diameter [mm]: 30
- Supplementary Article / Supplementary Info Info 2: with wheel hub, with ABS sensor ring, Wheel Bearing integrated into wheel hub
- Diameter [mm]: 96
- Width [mm]: 60
- Bearing Type: Angular Ball Bearing
- Condition: New
More
£58,58
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 141-01-223
Details
- Fitting Position: Front Axle
- Inner Diameter [mm]: 30
- Diameter [mm]: 152
- Number of mounting bores: 5
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£60,44
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 5782201
Details
- Fitting Position: Rear Axle both sides
- Condition: New
More
£61,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GT24-063
Details
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, with bolts/screws, with groove
- Rim Hole Number: 6
- Condition: New
More
£61,84
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 9329008
Details
- Fitting Position: Rear Axle Left, Rear Axle Right, Rear Axle
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Thread Size: M14X1,5
- for OE number: 9063500149
- Supplementary Article / Supplementary Info: without accessories
- Diameter [mm]: 174,7
- Rim Hole Number: 6
- Number of Teeth, ABS ring: 96
- Number of Teeth: 29
- Condition: New
More
£64,63
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 29SKV374
Details
- Fitting Position: Front Axle
- Diameter [mm]: 152
- Weight [kg]: 5,7
- Number of Holes: 5
- Always compare old and new part (in particular OE No.)
- Condition: New
More
£66,95
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 26869
Details
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting
- Rim Hole Number: 5
- Flange Diameter [mm]: 152
- Condition: New
More
-56%
compared to RRP:
£155,60
£67,88
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 9400353K
Details
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Thread Size: M14X1,5
- Supplementary Article / Supplementary Info: with accessories, with drive shaft bolt
- Diameter [mm]: 152
- Rim Hole Number: 6
- Number of Teeth, ABS ring: 96
- Version: One
- Condition: New
More
£71,60
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: KLP-ME-025
Details
- Fitting Position: Front Axle Left, Front Axle Right
- Fabrication Number: KLP-ME-025
- Condition: New
More
£73,93
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 5500308
Details
- Fitting Position: Front Axle
- Rim Hole Number: 5
- Flange Diameter [mm]: 152
- Condition: New
More
£81,83
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: W413480
Details
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting
- Rim Hole Number: 6
- Flange Diameter [mm]: 152
- Condition: New
More
£90,67
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: KLT-ME-018
Details
- Fitting Position: Rear Axle Left, Rear Axle Right
- No. of holes 2: 6
- Rotation angle [°]: 45
- Fabrication Number: KLT-ME-018
- Condition: New
More
-19%
compared to RRP:
£75,89
£60,91
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: H1M027BTA
Details
- Fitting Position: Front axle both sides
- Inner Diameter [mm]: 30
- Diameter [mm]: 152
- Rim Hole Number: 5
- Condition: New
More
£88,81
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 014 750 0007
Details
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info Info 2: with integrated wheel bearing, with integrated magnetic sensor ring
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Diameter [mm]: 175
- Fastening Type: Four-point attachment
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 130
- Rim Hole Number: 6
- Bearing Type: Tapered Roller Bearing
- Number of Teeth, ABS ring: 96
- Number of Teeth: 29
- Condition: New
More
-46%
compared to RRP:
£213,15
£114,38
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 134 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
