Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs VW Caddy Alltrack IV Van (SAA) 1.2TSI 84 hp Petrol
- Brake pads VW Caddy Alltrack IV Van (SAA) 1.2TSI 84 hp Petrol
- Brake caliper VW Caddy Alltrack IV Van (SAA) 1.2TSI 84 hp Petrol
- ABS sensor VW Caddy Alltrack IV Van (SAA) 1.2TSI 84 hp Petrol
- Brake caliper repair kit VW Caddy Alltrack IV Van (SAA) 1.2TSI 84 hp Petrol
- Handbrake VW Caddy Alltrack IV Van (SAA) 1.2TSI 84 hp Petrol
- Brake disc back plate VW Caddy Alltrack IV Van (SAA) 1.2TSI 84 hp Petrol
- Brake caliper carrier VW Caddy Alltrack IV Van (SAA) 1.2TSI 84 hp Petrol
- Brake hose VW Caddy Alltrack IV Van (SAA) 1.2TSI 84 hp Petrol
- Master cylinder VW Caddy Alltrack IV Van (SAA) 1.2TSI 84 hp Petrol
- Handbrake cable CADDY 1.2TSI 84 hp Petrol
- Guide sleeve kit, brake caliper CADDY 1.2TSI 84 hp Petrol
- Brake fluid CADDY 1.2TSI 84 hp Petrol
- Brake pad fitting kit CADDY 1.2TSI 84 hp Petrol
- Brake servo CADDY 1.2TSI 84 hp Petrol
- Brake pads and discs CADDY 1.2TSI 84 hp Petrol
- Brake light switch CADDY 1.2TSI 84 hp Petrol
- Abs ring CADDY 1.2TSI 84 hp Petrol
- Brake pipe CADDY 1.2TSI 84 hp Petrol
- Brake caliper piston CADDY 1.2TSI 84 hp Petrol
- Brake disc bolts CADDY 1.2TSI 84 hp Petrol
- Brake fluid reservoir CADDY 1.2TSI 84 hp Petrol
- Handbrake switch CADDY 1.2TSI 84 hp Petrol
- Performance brake discs CADDY 1.2TSI 84 hp Petrol
- High-performance brake pads CADDY 1.2TSI 84 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs VW Caddy Alltrack IV Van (SAA) 1.2 TSI 84 hp Petrol
Article №: 82B0342
Details
- Fitting Position: Rear Axle
- Diameter: 271,8
- Brake Disc Type: solid
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 10
- Centering Diameter [mm]: 65
- Height: 48,3
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
£20,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0028
Details
-
- for PR number: 1ZE
- Fitting Position: Front Axle
- Fitting Position: Front Axle
- Diameter: 288
- Brake Disc Type: Vented
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 24,9
- Centering Diameter [mm]: 65
- Height: 49,9
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
£25,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0031
Details
-
- for PR number: 1ZA
- Fitting Position: Front Axle
- Fitting Position: Front Axle
- Diameter: 312
- Brake Disc Type: Vented
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15,4
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 25,1
- Minimum thickness [mm]: 22,0
- Centering Diameter [mm]: 65,1
- Inner Diameter [mm]: 146,0
- Height: 49,9
- Surface: Uncoated
- Machining: Untreated
- No. of holes 2: 9
- Material: Cast Iron
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts/screws, without bolts/screws
- Drilled: no
- usable for vehicles to construction year: 2016/11
- Condition: New
More
£27,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0020347
Details
- Fitting Position: Rear Axle
- Diameter: 271,8
- Brake Disc Type: solid
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 10
- Centering Diameter [mm]: 65
- Height: 48,3
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
£20,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0342P
Details
- Fitting Position: Rear Axle
- Diameter: 271,8
- Brake Disc Type: solid
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 10
- Centering Diameter [mm]: 65
- Height: 48,3
- Surface: Coated
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
£22,92
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 36128
Details
- Fitting Position: Rear Axle
- Diameter: 272
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness: 48
- Brake Disc Thickness: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Surface: Coated
- Number of mounting bores: 1
- for OE number: 5Q0 615 601 D
- Observe service information
- Drilled: no
- Condition: New
More
£22,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADV184326
Details
- Fitting Position: Rear Axle
- Diameter: 272
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness: 48
- Brake Disc Thickness: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Surface: Coated
- Number of mounting bores: 1
- for OE number: 5Q0 615 601 D
- Observe service information
- Drilled: no
- Condition: New
More
£23,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 9072060
Details
- Fitting Position: Rear Axle
- Diameter: 272
- Brake Disc Type: solid
- Rim Hole Number: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Height: 48
- Weight [kg]: 8,2
- Number of mounting bores: 4
- No. of holes 1: 1
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with screw
- Drilled: no
- Condition: New
More
£23,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: VKBD 90041 S2
Details
- Fitting Position: Rear Axle
- Diameter: 272
- Brake Disc Type: solid
- Number of Holes: 9
- Number of bores: 1
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 10
- Minimum thickness [mm]: 9
- Centering Diameter [mm]: 65
- Height: 48,3
- Surface: Coated
- Condition: New
More
£23,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562614CH
Details
- Fitting Position: Rear Axle
- Diameter: 272
- Brake Disc Type: solid
- Number of Holes: 9
- Bolt Hole Circle Ø [mm] 0
- Brake Disc Thickness: 10
- Minimum thickness [mm]: 9
- Centering Diameter [mm]: 65
- Height: 48
- Weight [kg]: 6,2
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 27,3
- Packaging width [cm]: 27,3
- Packaging height [cm]: 10
- Drilled: no
- Condition: New
More
£24,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 231-04-011
Details
- Fitting Position: Rear Axle
- Diameter: 272
- Brake Disc Type: solid
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 9,7
- Centering Diameter [mm]: 65
- Height: 48,2
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Article number of recommended accessories: 131-07-641, 131-07-642, 131-07-721, 131-07-722, 131-07-723, 131-07-724
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£24,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 116-971
Details
- Product line: PRO
- Fitting Position: Rear Axle
- Diameter: 272
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 149
- Height: 48,3
- Weight [kg]: 3,9
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£24,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKAD-2030
Details
-
- for PR number: 1ZA
- Fitting Position: Front Axle
- Fitting Position: Front Axle
- Diameter: 312
- Brake Disc Type: Vented
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15,4
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 25,1
- Centering Diameter [mm]: 65,1
- Height: 49,5
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
£27,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6050262
Details
- Fitting Position: Rear Axle
- Diameter: 272
- Brake Disc Type: solid
- Brake Disc Thickness: 9,7
- Centering Diameter [mm]: 65
- Height: 48,2
- Production Number: K6050262
- Drilled: no
- Condition: New
More
£28,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A1038P
Details
- Fitting Position: Rear Axle
- Diameter: 272
- Number of Holes: 9
- Brake Disc Thickness: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Height: 48,3
- Drilled: no
- Condition: New
More
£29,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-2018
Details
- Fitting Position: Rear Axle
- Diameter: 272
- Brake Disc Type: solid
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Height: 48,3
- Surface: Coated, Oiled
- Test Mark: E1 90R 02 C0190/0261
- Drilled: no
- Condition: New
More
£30,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BR-10052-C
Details
-
- Fitting Position: Rear Axle
- Manufacturer Restriction: BOSCH
- Diameter: 272
- Brake Disc Type: solid
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 10
- Centering Diameter [mm]: 65
- Hub Diameter 2 [mm]: 150
- Height: 48,3
- Surface: Coated
- Drilled: no
- Condition: New
More
£31,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SD5411
Details
- Fitting Position: Rear Axle
- Diameter: 272
- Brake Disc Type: solid
- Number of Holes: 10
- Bolt Hole Circle Ø [mm]: 112
- Thickness: 10
- Brake Disc Thickness: 8
- Centering Diameter [mm]: 65
- Height: 48,3
- Weight [kg]: 4,02
- Condition: New
More
£31,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A1038PR
Details
- Fitting Position: Rear Axle
- Diameter: 272
- Brake Disc Type: solid
- Number of Holes: 9
- Rim Hole Number: 9
- Brake Disc Thickness: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Height: 48,3
- Surface: Coated
- Drilled: no
- Condition: New
More
£31,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 18117
Details
-
- Fitting Position: Rear Axle
- Vehicle type: Caddy Alltrack
- Product line: COATED
- Diameter: 272
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Hub Diameter [mm]: 150
- Height: 48,3
- Weight [kg]: 4,02
- Surface: Coated
- Drilled: no
- Condition: New
More
£32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24011003561PR-PCS-MS
Details
- Fitting Position: Rear Axle
- Diameter: 272
- Brake Disc Type: solid
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 9,7
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 174,5
- Height: 48,2
- Surface: Coated
- Required quantity: 2
- Bore Diameter [mm]: 15,3
- Net weight [kg]: 3,99
- Gross Weight [kg]: 4,10, 4
- Drilled: no
- Condition: New
More
£32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: B130295
Details
- Fitting Position: Rear Axle
- Diameter: 272
- Brake Disc Type: solid
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 9,7
- Minimum thickness [mm]: 8,0
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 174,5
- Height: 48,2
- Bore Diameter [mm]: 15,3
- Drilled: no
- Condition: New
More
£32,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-1248C
Details
- Fitting Position: Rear Axle
- Diameter: 272,0
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness: 10,0
- Centering Diameter [mm]: 65,0
- Height: 48,3
- Surface: Painted
- Test Mark: ECE-R90, ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£32,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BDC5994
Details
- Fitting Position: Rear Axle
- Diameter: 272
- Brake Disc Type: solid
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Height: 48,5
- Drilled: no
- Condition: New
More
£33,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20314
Details
- Fitting Position: Rear Axle
- Diameter: 271,8
- Brake Disc Type: solid
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness: 10
- Centering Diameter [mm]: 65
- Height: 48,3
- Surface: Coated
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
£58,93
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 300 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- ...
- 11
- 12
