Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber VW Arteon (3H7) 2.0TSI 190 hp Petrol
- Coil spring VW Arteon (3H7) 2.0TSI 190 hp Petrol
- Top strut mount and bearing VW Arteon (3H7) 2.0TSI 190 hp Petrol
- Suspension kit, coil springs VW Arteon (3H7) 2.0TSI 190 hp Petrol
- Shock absorber dust cover and bump stops VW Arteon (3H7) 2.0TSI 190 hp Petrol
- Boot, air suspension VW Arteon (3H7) 2.0TSI 190 hp Petrol
- Suspension kit, shock absorber and coil spring VW Arteon (3H7) 2.0TSI 190 hp Petrol
- Repair kit, wheel suspension VW Arteon (3H7) 2.0TSI 190 hp Petrol
- Spring cap VW Arteon (3H7) 2.0TSI 190 hp Petrol
- Camber bolts VW Arteon (3H7) 2.0TSI 190 hp Petrol
- Relay, leveling control ARTEON 2.0TSI 190 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Suspension kit, shock absorber and coil spring VW Arteon (3H7) 2.0 TSI 190 hp Petrol
Article №: E90-85-041-04-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 25
- Axle Load rear axle to [kg]: 1180
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 20
- Axle Load front axle to [kg]: 1120
-
- Observe service information
- Registration Type: with General Operating Permit (ABE)
- EG type approval number from: e1*2007/46*1725*..
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Suspension Strut Outer Diameter [mm]: 55
- Suspension: for vehicles without electronic suspension control
- Vehicle Equipment: for vehicles without level control
- Axle Load rear axle to [kg]: 1150
- Axle: Multi-link Axle
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: E90-85-044-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 25
- Axle Load rear axle to [kg]: 1180
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 20
- Axle Load front axle to [kg]: 1200
-
- Observe service information
- Registration Type: with General Operating Permit (ABE)
- EG type approval number from: e1*2007/46*1725*..
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Suspension Strut Outer Diameter [mm]: 55
- Suspension: for vehicles without electronic suspension control
- Condition: New
More
Article №: PSS65-85-044-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 25-50
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 25-50
-
- Observe service information
- EG type approval number from: e1*?/?*1725*..
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Axle Load front axle to [kg]: 1140
- Axle Load rear axle to [kg]: 1120
- Suspension Strut Outer Diameter [mm]: 55
- Axle: Multi-link Axle
- Vehicle Equipment: for vehicles without level control
- Follow installation instructions
- Condition: New
More
Article №: 47-251588
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1253, 1220
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 55
- Product line: - B14 PSS
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: PSS65-85-044-03-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 25-50
- Axle Load rear axle to [kg]: 1170
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 25-50
- Axle Load front axle to [kg]: 1160
-
- Observe service information
- EG type approval number from: e1*?/?*1725*..
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Registration Type: with certificate
- Suspension Strut Outer Diameter [mm]: 55
- Vehicle Equipment: for vehicles without level control
- Follow installation instructions
- Condition: New
More
Article №: PSS65-85-044-05-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 25-50
- Axle Load rear axle to [kg]: 1170
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 25-50
- Axle Load front axle to [kg]: 1160
-
- Observe service information
- EG type approval number from: e1*?/?*1725*..
- Suspension: Threaded Suspension (height adjustable), for vehicles with electronic suspension control
- Registration Type: with certificate
- Suspension Strut Outer Diameter [mm]: 55
- Vehicle Equipment: for vehicles without level control
- contains article number: AM65-15-021-01-22
- Follow installation instructions
- Condition: New
More
Article №: 49-255874
Details
-
- Fitting Position: Rear Axle
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- for PR number: G02, G04
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Electronically adjustable shock strength, Built-in adjustable
- Suspension: for vehicles with electronic suspension control, Threaded Suspension (height adjustable)
- Suspension Strut Outer Diameter [mm]: 55
- Product line: - B16 Damptronic®
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: MNE1185N0035
Details
- Length [mm]: 409, 631
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Supplementary Article / Supplementary Info Info 2: without bearing
- Condition: New
More
Article №: ME1185N0101
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
Article №: MNE1185N0086
Details
- Weight [kg]: 4,29
- Packaging length [cm]: 56,8
- Packaging width [cm]: 17,2
- Packaging height [cm]: 17,2
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Condition: New
More
Article №: SA1185N0053
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
Article №: 28851-22
Details
-
- Lowered front axle from [mm]: 30
- Lowered front axle to [mm]: 40
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 50
- for components see parts list
- Axle Load front axle from [kg]: 986
- Suspension Strut Outer Diameter [mm]: 55
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 47-229976
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1220
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1160
- Lowered Suspension ca. [mm]: 30-50
-
- Registration Type: Conditions see certificate
- Shock Absorber Type: Gas Pressure
- Suspension: Threaded Suspension (height adjustable)
- Suspension Strut Outer Diameter [mm]: 55
- Product line: - B14 PSS
- Condition: New
More
Article №: 47-342941
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1260
- Lowered Suspension ca. [mm]: 10-40
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- Lowered Suspension ca. [mm]: 20-35
-
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Axle: Multi-link Axle
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable)
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 46-259547
Details
-
- Fitting Position: Rear Axle
- Axle: Multi-link Axle
- Axle Load [kg] to: 1180
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 25
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1120
- for PR number: G02
- Lowered Suspension ca. [mm]: 20
-
- Registration Type: Conditions see certificate, with General Operating Permit (ABE)
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Product line: - B12 Pro-Kit
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 46-332196
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- Lowered Suspension ca. [mm]: 20
-
- Fitting Position: Rear Axle
- Axle: Multi-link Axle
- Axle Load [kg] to: 1180
- Lowered Suspension ca. [mm]: 25
-
- Registration Type: Conditions see certificate, with General Operating Permit (ABE)
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Condition: New
More
Article №: 47-309067
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1260
- Lowered Suspension ca. [mm]: 10-40
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- Lowered Suspension ca. [mm]: 20-35
-
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 55
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 48-609073
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1253
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Mechanically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 48-230063
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1253
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1160
- Lowered Suspension ca. [mm]: 30-50
-
- Shock Absorber System: Built-in adjustable
- Registration Type: Conditions see certificate
- Shock Absorber Type: Gas Pressure
- Suspension: Threaded Suspension (height adjustable)
- Suspension Strut Outer Diameter [mm]: 55
- Product line: - B16 PSS10
- Condition: New
More
Article №: 48-251570
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1253
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Mechanically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Product line: - B16 PSS10
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 49-261073
Details
-
- Fitting Position: Rear Axle
- Axle: 014
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- for PR number: G02
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Suspension: Threaded Suspension (height adjustable)
- Product line: - B16 ridecontrol®
- Condition: New
More
Article №: 49-296389
Details
-
- Fitting Position: Rear Axle
- Axle: 014
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- for PR number: G02
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Electronically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Condition: New
More
Article №: 49-309089
Details
-
- Fitting Position: Rear Axle
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- for PR number: G02, G04
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Electronically adjustable shock strength
- Suspension: Threaded Suspension (height adjustable)
- Suspension Strut Outer Diameter [mm]: 55
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 49-231892
Details
-
- Fitting Position: Rear Axle
- Axle: 014
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- for PR number: G02
- Lowered Suspension ca. [mm]: 30-50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Electronically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 55
- Product line: - B16 ridecontrol®
- Condition: New
More
