Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
-
Clutch
- Clutch kit Volvo v70 bw 2.0 BiFuel 214 hp Petrol/Liquified Petroleum Gas (LPG)
- Clutch master cylinder Volvo v70 bw 2.0 BiFuel 214 hp Petrol/Liquified Petroleum Gas (LPG)
- Central slave cylinder Volvo v70 bw 2.0 BiFuel 214 hp Petrol/Liquified Petroleum Gas (LPG)
- Clutch plate Volvo v70 bw 2.0 BiFuel 214 hp Petrol/Liquified Petroleum Gas (LPG)
- Clutch pressure plate Volvo v70 bw 2.0 BiFuel 214 hp Petrol/Liquified Petroleum Gas (LPG)
- Pedals and pedal covers Volvo v70 bw 2.0 BiFuel 214 hp Petrol/Liquified Petroleum Gas (LPG)
- Clutch switch Volvo v70 bw 2.0 BiFuel 214 hp Petrol/Liquified Petroleum Gas (LPG)
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Clutch kit Volvo v70 bw 2.0 BiFuel 214 hp Petrol/Liquified Petroleum Gas (LPG)
Article №: 3000 951 819
Details
- Product line: XTend
- Diameter: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Transmission Type: 6-Speed Manual Transmission
- Hub Profile: 23x26-23N
- Observe service information
- only available in set
- Condition: New
More
Article №: 3000 990 192
Details
- Product line: XTend Kit plus CSC
- Diameter: 240
- Number of Teeth: 23
- Transmission Type: 6-Speed Manual Transmission
- Condition: New
More
You may also be interested in
Article №: 2290 601 020
Details
- Product line: ZMS Modul XTend plus CSC
- Diameter: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Mounting Type: not pre-mounted
- Condition: New
More
Inside the package:
- Central Slave Cylinder, clutch 1
- Clutch kit 1
- Dual mass flywheel 1
- Bolt Kit, clutch 1
- Grease 1
- Screw Set, flywheel 1
More
Article №: 624 3297 33
Details
- Diameter: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 837454
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,77, 20,2
- Number of mounting bores: 8
- only to be used within set
- Tightening Torque [Nm]: 50
- only available in set
- Condition: New
More
Article №: ADF1230120
Details
- Diameter: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- Observe service information
- Condition: New
More
£132,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 624 3953 09
Details
- Diameter: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Inside the package:
- Clutch Pressure Plate 1
- Clutch Disc 1
More
Article №: 624 3952 09
Details
- Diameter: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Inside the package:
- Clutch Pressure Plate 1
- Clutch Disc 1
More
Article №: 3000 951 548
Details
- Diameter: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Hub Profile: 23,2x26,3-23N
- Observe service information
- only available in set
- Condition: New
More
Article №: ADF123621
Details
- Diameter: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- Observe service information
- Condition: New
More
Article №: 834579
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 26,4 x 23,2
- Weight [kg]: 6,5
- Bore Diameter [mm]: 31
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Number of mounting bores at central slave cylinder: 3
- Material: Plastic
- Condition: New
More
Article №: 3000 990 446
Details
- Diameter: 240
- Number of Teeth: 23
- Alternative Repair Kit: 3000 970 126
- only available in set
- Condition: New
More
Article №: 3000 990 378
Details
- Product line: XTend Kit plus CSC
- Diameter: 240
- Number of Teeth: 23
- Alternative Repair Kit: 3000 970 037
- Condition: New
More
Article №: 832587
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Hub Profile: 23,3 x 26,5
- Weight [kg]: 5,75
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Condition: New
More
Article №: 834484
Details
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Weight [kg]: 6,478
- Condition: New
More
Article №: 3000 990 250
Details
- Product line: XTend Kit plus CSC
- Diameter: 240
- Number of Teeth: 23
- Alternative Repair Kit: 3000 951 815
- Condition: New
More
Article №: 834466
Details
- Product line: KIT3P (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without sensor
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 26 x 23
- Weight [kg]: 6,41
- Clutch: for vehicles with push type clutch
- Bore Diameter [mm]: 31
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Number of mounting bores at central slave cylinder: 1
- Material: Aluminium
- Condition: New
More
Article №: 624 3710 09
Details
- Diameter: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Inside the package:
- Clutch Pressure Plate 1
- Clutch Disc 1
More
Article №: 624 3295 34
Details
- Diameter: 240
- Supplementary Article / Supplementary Info Info 2: Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Condition: New
More
Article №: ADF123035
Details
- Diameter: 241
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: two-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- Observe service information
- Condition: New
More
Inside the package:
- Clutch Disc 1
- Grease 1
More
£101,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 600 0203 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel without friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 16
- Number of mounting bores: 10
- Condition: New
More
Inside the package:
- Central Slave Cylinder, clutch 1
- Clutch kit 1
- Clutch kit 1
- Dual mass flywheel 1
- Screw Set, flywheel 1
More
Article №: 100.688
Details
- Diameter: 240
- Supplementary Article / Supplementary Info Info 2: with release plate, with clutch disc
- for flywheel manufacturer: Sachs
- Clutch Equipment: cover, disc
- Condition: New
More
£120,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 624 3261 19
Details
- Diameter: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Inside the package:
- Clutch Pressure Plate 1
- Clutch Disc 1
More
Article №: 624 3953 34
Details
- Diameter: 240
- Supplementary Article / Supplementary Info: with central slave cylinder
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 120.692
Details
- Supplementary Article / Supplementary Info Info 2: with release plate, with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder
- for flywheel manufacturer: LUK
- Clutch Equipment: hydr.bearing(CSC)
- Condition: New
More
