Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs VOLVO 340-360 Saloon (344) 1.4 72 hp Petrol
- Ignition coil VOLVO 340-360 Saloon (344) 1.4 72 hp Petrol
- Glow plugs VOLVO 340-360 Saloon (344) 1.4 72 hp Petrol
- Ignition leads VOLVO 340-360 Saloon (344) 1.4 72 hp Petrol
- Crankshaft sensor VOLVO 340-360 Saloon (344) 1.4 72 hp Petrol
- Distributor cap VOLVO 340-360 Saloon (344) 1.4 72 hp Petrol
- Distributor rotor VOLVO 340-360 Saloon (344) 1.4 72 hp Petrol
- Distributor and parts VOLVO 340-360 Saloon (344) 1.4 72 hp Petrol
- Repair kit, distributor VOLVO 340-360 Saloon (344) 1.4 72 hp Petrol
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Spark plugs VOLVO 340-360 Saloon (344) 1.4 72 hp Petrol
Article №: 686S0012
Details
-
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
-72%
compared to RRP:
£4,20
£1,16
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990011
Details
-
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
-73%
compared to RRP:
£4,19
£1,10
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0042
Details
- Supplementary Info: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,7
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1,25
- Diameter [mm]: 21
- Length [mm]: 73,5
- TecDoc Engine Number: B 14.4 S
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
-9%
compared to RRP:
£2,55
£2,32
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8EH 188 704-001
YH7RCP-8U
Details
- Thread Length [mm]: 19
- Engine Code: B14.1, B14.2, B14.3, B14.4
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1,25
- Tightening Torque [Nm]: 25, 30
- Assy./disassy. by qualified personnel required!
- Condition: New
More
-5%
compared to RRP:
£2,44
£2,32
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8EH 188 704-021
YH8RCP-8U
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 21
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1.25
- Tightening Torque [Nm]: 25
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£2,32
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: W16EPR-U
D6
Details
-
- TecDoc Engine Number: B 14.4 S
- electrode gap to be set [mm]: 0,7
- Required quantity: 4
- Engine Code: B14.1
- Product line: Nickel
- Thread Length [mm]: 19
- Spanner Size: 20.6 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Connector type: Removable SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 56
- for OE number: 7700500048
- alternative item: W16TT
- Condition: New
More
-13%
compared to RRP:
£3,76
£3,25
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 240 592
Set 4 - 0 242 240 849, Blister N15 - WR 6 DC
Details
-
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£3,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 4008
Details
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Spanner Size: 20,8 mm
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector
- Thread Size: M14 x 1,25
- Condition: New
More
£3,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 94811
Blister 07 - 4R
Details
- Supplementary Info: BLISTER
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Electrode Gap [mm]: 0,7
- Spanner Size: 20,8 mm
- Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
- Thread Size: M14 x 1,25
- Condition: New
More
£3,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 7822
BPR6ES
Details
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Electrode Gap [mm]: 0,7
- Spanner Size: 20,8 mm
- Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
- Thread Size: M14 x 1,25
- Condition: New
More
-22%
compared to RRP:
£4,79
£3,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 2268
V-Line 2, BPR6E
Details
- Product line: V-Line
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Electrode Gap [mm]: 0,7
- Spanner Size: 20,8 mm
- Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
- Thread Size: M14 x 1,25
- Condition: New
More
£3,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6464
Details
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Electrode Gap [mm]: 0,7
- Spanner Size: 20,8 mm
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector
- Thread Size: M14 x 1,25
- Condition: New
More
-24%
compared to RRP:
£4,90
£3,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: OE006/T10
RN9YC, OE006
Details
- Product line: Powersport
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Required quantity: 4
- Packing Type: Box
- Quality/ Grade: Nickel GE
- Technical Information Number: RN9YC
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 9
- Projection [mm]: 1,5
- Condition: New
More
-57%
compared to RRP:
£8,71
£3,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: CCH4151
CCH4151
Details
- Product line: Powersport
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Self-service suited packaging see parts list
- Packing Type: Blister Pack
- Quality/ Grade: Nickel GE
- Technical Information Number: RN9YC
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 14,3
- Packaging width [cm]: 6,2
- Packaging height [cm]: 2
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 9
- Projection [mm]: 1,5
- Condition: New
More
-34%
compared to RRP:
£6,49
£4,28
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0001
Details
- Product line: Q+, original equipment manufacturer quality
- Engine Code: B14.1, B14.2, B14.3, B14.4
- Electrode Gap [mm]: 0,7
- Spark Plug: 1 - Earthed Electrode
- Weight [kg]: 0,06
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£4,64
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 7090519
Details
- Thread Length [mm]: 19
- Spanner Size: 20
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
- for OE number: 59622A
- Condition: New
More
£4,64
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 7090520
Details
- Thread Length [mm]: 19
- Spanner Size: 20
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
- for OE number: 09482-00299
- Condition: New
More
£4,64
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8EH 188 705-121
PH7RC-8
Details
- Thread Length [mm]: 19
- Engine Code: B14.1, B14.2, B14.3, B14.4
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1.25
- Tightening Torque [Nm]: 25
- Assy./disassy. by qualified personnel required!
- Condition: New
More
-10%
compared to RRP:
£5,17
£4,64
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: CET8
Details
-
- Required quantity: 4
- Alternatively
- Product line: Aerovantage Spoiler
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Packing Type: Box
- Quality/ Grade: Ti Poly-V
- Technical Information Number: CET8
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
-55%
compared to RRP:
£10,48
£4,64
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: UPT8
Details
-
- Required quantity: 4
- Alternatively
- Supplementary Info: ULTRA TITAN
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Quality/ Grade: Poly-V Tit
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Condition: New
More
-58%
compared to RRP:
£12,23
£5,11
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: W16TT
T01
Details
-
- TecDoc Engine Number: B 14.4 S
- electrode gap to be set [mm]: 0,7
- Required quantity: 4
- Engine Code: B14.1
- Product line: Nickel TT
- Thread Length [mm]: 19
- Spanner Size: 20.6 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Connector type: Crimped SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 58
- for OE number: 1WT118110
- alternative item: IW16, IW16TT, IW16
- Condition: New
More
£5,57
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: IW16TT
Details
-
- TecDoc Engine Number: B 14.4 S
- electrode gap to be set [mm]: 0,7
- Required quantity: 4
- Fuel Type: CNG/LPG
- Product line: Iridium TT
- Thread Length [mm]: 19
- Spark Plug: with resistor, 1 - Earthed Electrode, Iridium Middle Electrode, Platinum mass electrode
- Thread Size: M14x1.25
- Diameter [mm]: 14
- Gross Weight [g]: 61
- alternative item: IW16TT
- Condition: New
More
£12,55
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6637
BPR6EIX
Details
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Electrode Gap [mm]: 0,7
- Spanner Size: 20,8 mm
- Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
- Thread Size: M14 x 1,25
- Condition: New
More
-35%
compared to RRP:
£20,21
£13,01
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: CCH9804
OE195, 9804
Details
-
- Required quantity: 4
- Alternatively
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode
- Thread Size: M14x1.25
- Connector type: SAE
- Packing Type: Box
- Quality/ Grade: Pt GE
- Technical Information Number: RN8WYPB3
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 10
- Packaging width [cm]: 2,5
- Packaging height [cm]: 2,5
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
-30%
compared to RRP:
£24,62
£17,20
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1497
LPG Laser Line 2, LPG2
Details
- Product line: LPG Laser Line
- Electrode Gap [mm]: 0,7
- Spanner Size: 20,8 mm
- Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode
- Thread Size: M14 x 1,25
- Fuel Type: CNG/LPG
- Recommended change interval [km]: 60000
- Condition: New
More
-30%
compared to RRP:
£26,78
£18,59
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 56 products
Show the next items
- 1
- 2
- 3
