Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Suspension arm VAUXHALL Astra Mk6 (J) Saloon (P10) 1.7CDTI 110 hp Diesel
- Wheel hub VAUXHALL Astra Mk6 (J) Saloon (P10) 1.7CDTI 110 hp Diesel
- Wheel bearing VAUXHALL Astra Mk6 (J) Saloon (P10) 1.7CDTI 110 hp Diesel
- Top strut mount and bearing VAUXHALL Astra Mk6 (J) Saloon (P10) 1.7CDTI 110 hp Diesel
- Anti-roll bar link VAUXHALL Astra Mk6 (J) Saloon (P10) 1.7CDTI 110 hp Diesel
- Track rod end VAUXHALL Astra Mk6 (J) Saloon (P10) 1.7CDTI 110 hp Diesel
- Engine mount VAUXHALL Astra Mk6 (J) Saloon (P10) 1.7CDTI 110 hp Diesel
- Suspension kit VAUXHALL Astra Mk6 (J) Saloon (P10) 1.7CDTI 110 hp Diesel
- Inner tie rod VAUXHALL Astra Mk6 (J) Saloon (P10) 1.7CDTI 110 hp Diesel
- ABS sensor VAUXHALL Astra Mk6 (J) Saloon (P10) 1.7CDTI 110 hp Diesel
- Ball joint ASTRA 1.7CDTI 110 hp Diesel
- Shock absorber dust cover and bump stops ASTRA 1.7CDTI 110 hp Diesel
- Suspension bushes ASTRA 1.7CDTI 110 hp Diesel
- Tyre pressure sensor (TPMS) ASTRA 1.7CDTI 110 hp Diesel
- Anti-roll bar bushes ASTRA 1.7CDTI 110 hp Diesel
- Axle bushes ASTRA 1.7CDTI 110 hp Diesel
- Wheel bolts and wheel nuts ASTRA 1.7CDTI 110 hp Diesel
- Steering rack boot ASTRA 1.7CDTI 110 hp Diesel
- Wheel nuts ASTRA 1.7CDTI 110 hp Diesel
- Anti-roll bar stabiliser kit ASTRA 1.7CDTI 110 hp Diesel
- Nut, stub axle ASTRA 1.7CDTI 110 hp Diesel
- Towbar / parts
- Wiper and washer system
Sway bar VAUXHALL Astra Mk6 (J) Saloon (P10) 1.7 CDTI 110 hp Diesel
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
VAUXHALL Astra Mk VI (J) Saloon (P10) 1.7 CDTI year of manufacture 2012, 110 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Length [mm]: 1045
- Fitting Position: Front Axle
- Stabiliser Diameter [mm]: 19
- Supplementary Article / Supplementary Info: with rubber mounts
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Fitting Position: Front Axle
- Length [mm]: 588
- Width [mm]: 1036
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Length [mm]: 1035
- Fitting Position: Front Axle
- Stabiliser Diameter [mm]: 23,6
- Supplementary Article / Supplementary Info Info 2: without coupling rod
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear
- Diameter [mm]: 21
- Weight [kg]: 1,695
- Packaging length [cm]: 120,0
- Packaging width [cm]: 20,0
- Packaging height [cm]: 12,0
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 25
- adjustable: can be adjusted twice
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 18
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Article / Supplementary Info: with rubber mounts
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info Info 2: with coupling rod
- Stabiliser Diameter [mm]: 22
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Colour: yellow
- Fitting Position: Front Axle
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 32
- adjustable: can be adjusted twice
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Rear Axle
- Required quantity: 1
- Supplementary Article / Supplementary Info Info 2: with clamps, with rubber mount
- Stabiliser Diameter [mm]: 21,7
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Rear Axle
- Required quantity: 1
- Supplementary Article / Supplementary Info Info 2: with clamps, with rubber mount
- Stabiliser Diameter [mm]: 18,5
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Registration Type: with certificate
- Fitting Position: Front Axle, Rear Axle
- adjustable: can be adjusted twice
- Axle: Multi-link Axle
- Condition: New
Over 100 in stock
