Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Toyota MR2 SW20 2.0 (SW20) 225 hp Petrol
- Brake pads Toyota MR2 SW20 2.0 (SW20) 225 hp Petrol
- Brake caliper Toyota MR2 SW20 2.0 (SW20) 225 hp Petrol
- ABS sensor Toyota MR2 SW20 2.0 (SW20) 225 hp Petrol
- Brake caliper repair kit Toyota MR2 SW20 2.0 (SW20) 225 hp Petrol
- Handbrake Toyota MR2 SW20 2.0 (SW20) 225 hp Petrol
- Brake hose Toyota MR2 SW20 2.0 (SW20) 225 hp Petrol
- Handbrake cable Toyota MR2 SW20 2.0 (SW20) 225 hp Petrol
- Guide sleeve kit, brake caliper Toyota MR2 SW20 2.0 (SW20) 225 hp Petrol
- Brake pad fitting kit Toyota MR2 SW20 2.0 (SW20) 225 hp Petrol
- Brake light switch MR2 2.0 (SW20) 225 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Brake discs Toyota MR2 SW20 2.0 (SW20) 225 hp Petrol
Article №: 82B0866
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 263
- Brake Disc Type: Vented
- Number of Holes: 5/12
- Wheel Bolt Bore Diameter [mm]: 14,4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 16
- Minimum thickness [mm]: 15
- Centering Diameter [mm]: 62
- Inner Diameter [mm]: 147
- Height [mm]: 46,2
- Surface: Uncoated
- Material: Cast Iron
- Bore Diameter [mm]: 14,4
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-42%
compared to RRP:
£ 39,90
£ 22,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B1722
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/12
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 21
- Centering Diameter [mm]: 62,1
- Height [mm]: 46,2
- Supplementary Article / Supplementary Info Info 2: without wheel studs, without bolts/screws, without wheel hub
- Drilled: no
- Condition: New
More
-45%
compared to RRP:
£ 60,70
£ 33,11
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0023016
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 263
- Brake Disc Type: Vented
- Number of Holes: 5/12
- Wheel Bolt Bore Diameter [mm]: 14,4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 16
- Minimum thickness [mm]: 15
- Centering Diameter [mm]: 62
- Inner Diameter [mm]: 147
- Height [mm]: 46,2
- Surface: Uncoated
- Material: Cast Iron
- Bore Diameter [mm]: 14,4
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-55%
compared to RRP:
£ 39,90
£ 17,86
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADT34372
Details
-
- Construction Year to: 12/1991
- Vehicle Identification Number (VIN) to: **********0059266
- Fitting Position: Rear Axle
- Diameter [mm]: 262
- Brake Disc Type: internally vented
- Rim Hole Number: 10
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 46
- Brake Disc Thickness [mm]: 16
- Minimum thickness [mm]: 15
- Centering Diameter [mm]: 62
- Weight [kg]: 4,216
- Surface: Coated
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Condition: New
More
-67%
compared to RRP:
£ 71,98
£ 23,45
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADT34368
Details
-
- Construction Year to: 12/1991
- Vehicle Identification Number (VIN) to: **********0059266
- Fitting Position: Front Axle
- Diameter [mm]: 258
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 47
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 62
- Weight [kg]: 5,175
- Surface: Coated
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Condition: New
More
-70%
compared to RRP:
£ 93,98
£ 28,05
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADT34367
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 280
- Brake Disc Type: internally vented
- Rim Hole Number: 10
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 47
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 62,1
- Weight [kg]: 6,180
- Surface: Coated
- Vehicle Identification Number (VIN) from: **********0059267
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Condition: New
More
-67%
compared to RRP:
£ 103,98
£ 33,57
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 113-071
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/12
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 21
- Centering Diameter [mm]: 62,1
- Height [mm]: 46,2
- Weight [kg]: 5,9
- Technical Information Number: 54496
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-60%
compared to RRP:
£ 92,23
£ 36,33
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADT34375
Details
- Fitting Position: Front Axle
- Diameter [mm]: 275
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 48
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 62,1
- Weight [kg]: 7,650
- Surface: Coated
- Vehicle Identification Number (VIN) from: **********0059267
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Condition: New
More
-64%
compared to RRP:
£ 105,98
£ 37,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BDC5190
Details
-
- Fitting Position: Front Axle
- Construction Year from: 12/1991
- Diameter [mm]: 275
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 62
- Height [mm]: 47
- Drilled: no
- Condition: New
More
-60%
compared to RRP:
£ 257,52
£ 101,19
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: J3302099
Details
-
- Fitting Position: Front Axle
- Construction Year to: 12/1991
- Diameter [mm]: 258
- Brake Disc Type: internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 24
- Inner Diameter [mm]: 142,4
- Hub Diameter [mm]: 62
- Height [mm]: 47,3
- Surface: Coated
- No. of holes 1: 2
- fulfils ECE norm: E1 90R-02C0064/0127
- Drilled: no
- Condition: New
More
£ 21,15
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0 986 479 V42
Details
-
- Construction Year to: 12/1991
- Fitting Position: Rear Axle
- Diameter [mm]: 263
- Brake Disc Type: Vented
- Number of Holes: 10
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 16
- Minimum thickness [mm]: 15
- Wheel Hub Diameter [mm]: 62
- Height [mm]: 46,2
- Surface: Oiled
- Bore Diameter up to [mm]: 14,4
- Drilled: no
- Condition: New
More
£ 21,61
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: J3312013
Details
-
- Fitting Position: Rear Axle
- Construction Year to: 12/1991
- Diameter [mm]: 263
- Brake Disc Type: internally vented
- Number of Holes: 10
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 16
- Minimum thickness [mm]: 15
- Inner Diameter [mm]: 142
- Hub Diameter [mm]: 62
- Height [mm]: 46,3
- Surface: Coated
- No. of holes 1: 2
- fulfils ECE norm: E1 90R-02C0064/0341
- Drilled: no
- Condition: New
More
£ 23,91
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BDC5077
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 263
- Brake Disc Type: solid
- Number of Holes: 10
- Brake Disc Thickness [mm]: 16,5
- Minimum thickness [mm]: 15
- Centering Diameter [mm]: 62
- Height [mm]: 46,3
- Drilled: no
- Condition: New
More
£ 26,67
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: J3312027
Details
-
- Fitting Position: Rear Axle
- Construction Year from: 01/1992
- Diameter [mm]: 281
- Brake Disc Type: internally vented
- Number of Holes: 10
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 21
- Inner Diameter [mm]: 142
- Hub Diameter [mm]: 62
- Height [mm]: 46,3
- Surface: Coated
- No. of holes 1: 2
- fulfils ECE norm: E1 90R-02C0064/0167
- Drilled: no
- Condition: New
More
-66%
compared to RRP:
£ 84,00
£ 28,05
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 92149600
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/12
- Wheel Bolt Bore Diameter [mm]: 14,8
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 21
- Centering Diameter [mm]: 62,1
- Inner Diameter [mm]: 147
- Height [mm]: 46,2
- Weight [kg]: 5,9
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 30,8
- Packaging width [cm]: 30,8
- Packaging height [cm]: 12,7
- Drilled: no
- Condition: New
More
-61%
compared to RRP:
£ 84,00
£ 32,65
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: MDC1237
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/12
- Wheel Bolt Bore Diameter [mm]: 14,8
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 21
- Centering Diameter [mm]: 62,1
- Inner Diameter [mm]: 147
- Height [mm]: 46,2
- Weight [kg]: 5,9
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 30,8
- Packaging width [cm]: 30,8
- Packaging height [cm]: 12,7
- Drilled: no
- Condition: New
More
-74%
compared to RRP:
£ 148,15
£ 38,17
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: J3302017
Details
-
- Fitting Position: Front Axle
- Construction Year from: 01/1992
- Diameter [mm]: 275
- Brake Disc Type: internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Inner Diameter [mm]: 143
- Hub Diameter [mm]: 62
- Height [mm]: 47,1
- Surface: Coated
- No. of holes 1: 2
- fulfils ECE norm: E1 90R-02C0064/0117
- Drilled: no
- Condition: New
More
-57%
compared to RRP:
£ 97,13
£ 41,39
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: MDC1236
Details
- Fitting Position: Front Axle
- Diameter [mm]: 275
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/07
- Wheel Bolt Bore Diameter [mm]: 14,5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 62
- Inner Diameter [mm]: 145,5
- Height [mm]: 47
- Weight [kg]: 7,9
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 30,8
- Packaging width [cm]: 30,8
- Packaging height [cm]: 12,7
- Drilled: no
- Condition: New
More
-71%
compared to RRP:
£ 161,96
£ 46,91
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BDC5086
Details
-
- Fitting Position: Front Axle
- Construction Year to: 12/1991
- Diameter [mm]: 258
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 62
- Height [mm]: 47
- Drilled: no
- Condition: New
More
£ 47,37
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0 986 479 U05
Details
-
- Construction Year to: 12/1991
- Fitting Position: Front Axle
- Diameter [mm]: 257,5
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 62
- Height [mm]: 47,4
- Surface: Oiled
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14,8
- Drilled: no
- Condition: New
More
£ 48,75
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0 986 479 U94
Details
-
- Construction Year from: 01/1992
- Construction Year to: 06/1995
- Fitting Position: Front Axle
- Diameter [mm]: 275
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Wheel Hub Diameter [mm]: 62
- Height [mm]: 47,2
- Surface: Oiled
- Bore Diameter up to [mm]: 14,6
- Drilled: no
- Condition: New
More
£ 51,05
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BDC4964
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 21
- Centering Diameter [mm]: 62
- Height [mm]: 46,5
- Drilled: no
- Condition: New
More
£ 124,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
