Car part
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs TOYOTA Hiace Van (H11, H20, H30, H40) 2.0 (RH32) 88 hp Petrol
- Brake pads TOYOTA Hiace Van (H11, H20, H30, H40) 2.0 (RH32) 88 hp Petrol
- Drum brake TOYOTA Hiace Van (H11, H20, H30, H40) 2.0 (RH32) 88 hp Petrol
- ABS sensor TOYOTA Hiace Van (H11, H20, H30, H40) 2.0 (RH32) 88 hp Petrol
- Brake caliper repair kit TOYOTA Hiace Van (H11, H20, H30, H40) 2.0 (RH32) 88 hp Petrol
- Handbrake TOYOTA Hiace Van (H11, H20, H30, H40) 2.0 (RH32) 88 hp Petrol
- Brake shoes TOYOTA Hiace Van (H11, H20, H30, H40) 2.0 (RH32) 88 hp Petrol
- Brake caliper carrier TOYOTA Hiace Van (H11, H20, H30, H40) 2.0 (RH32) 88 hp Petrol
- Brake hose TOYOTA Hiace Van (H11, H20, H30, H40) 2.0 (RH32) 88 hp Petrol
- Brake drum TOYOTA Hiace Van (H11, H20, H30, H40) 2.0 (RH32) 88 hp Petrol
- Handbrake cable HIACE 2.0 (RH32) 88 hp Petrol
- Guide sleeve kit, brake caliper HIACE 2.0 (RH32) 88 hp Petrol
- Brake fluid HIACE 2.0 (RH32) 88 hp Petrol
- Brake pad fitting kit HIACE 2.0 (RH32) 88 hp Petrol
- Wheel cylinder HIACE 2.0 (RH32) 88 hp Petrol
- Accessory kit, brake shoes HIACE 2.0 (RH32) 88 hp Petrol
- Brake light switch HIACE 2.0 (RH32) 88 hp Petrol
- Abs ring HIACE 2.0 (RH32) 88 hp Petrol
- Brake caliper piston HIACE 2.0 (RH32) 88 hp Petrol
- Master cylinder repair kit HIACE 2.0 (RH32) 88 hp Petrol
- Repair kit, wheel brake cylinder HIACE 2.0 (RH32) 88 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs TOYOTA Hiace Van (H11, H20, H30, H40) 2.0 (RH32) 88 hp Petrol


Article №: 82B1036
Details
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: Vented
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: M10x1.25
- Bolt Hole Circle Ø [mm]: 110
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 84
- Height [mm]: 46,6
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£ 23,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 60-02-222C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 251,8
- Brake Disc Type: Vented
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 79
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,7
- Height [mm]: 26
- Surface: Painted
- for OE number: 4351226031
- Drilled: no
- Condition: New
More
£ 27,72
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: DF1927
Details
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Centering Diameter [mm]: 84
- Height [mm]: 46,6
- Surface: Painted
- Thread Size: M10 x 1.25
- Colour: black
- Test Mark: E190R-02C0176/0074
- Drilled: no
- Condition: New
More
-70%
compared to RRP:
£ 108,89
£ 31,95
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 60270C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 257,3
- Brake Disc Type: Vented
- Construction Year from: 12/1982
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 84
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 24
- Brake System: AKEBONO
- Height [mm]: 47,4
- Surface: Painted
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 33,83
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 8DD 355 105-181
Details
-
- Fitting Position: Front Axle
- Construction Year from: 12/1982
- Diameter [mm]: 257
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/05
- Wheel Bolt Bore Diameter [mm]: 10
- Bolt Hole Circle Ø [mm]: 110
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 84
- Inner Diameter [mm]: 121,5
- Height [mm]: 46,2
- Weight [kg]: 5,6
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-62%
compared to RRP:
£ 94,60
£ 35,71
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 1163112800
Details
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25
- Surface: Coated
- Drilled: no
- Condition: New
More
-57%
compared to RRP:
£ 41,78
£ 17,85
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: DI-270C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 257,3
- Brake Disc Type: Vented
- Construction Year from: 12/1982
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 84
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 24
- Brake System: AKEBONO
- Height [mm]: 47,4
- Surface: Painted
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 18,79
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 1163106609
Details
- Supplementary Info: QH
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: Vented
- Hole Arrangement/Number: 8/5
- Brake Disc Thickness [mm]: 25
- Drilled: no
- Condition: New
More
£ 20,20
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 60222
Details
- Fitting Position: Front Axle
- Diameter [mm]: 251,8
- Brake Disc Type: Vented
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 79
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,7
- Height [mm]: 26
- Drilled: no
- Condition: New
More
£ 20,20
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: DI-270
Details
- Fitting Position: Front Axle
- Diameter [mm]: 257,3
- Brake Disc Type: Vented
- Construction Year from: 12/1982
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 84
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 24
- Brake System: AKEBONO
- Height [mm]: 47,4
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 20,67
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: MDC1072
Details
-
- Fitting Position: Front Axle
- Construction Year from: 12/1982
- Diameter [mm]: 257
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/05
- Wheel Bolt Bore Diameter [mm]: 10
- Bolt Hole Circle Ø [mm]: 110
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 84
- Inner Diameter [mm]: 1
- Height [mm]: 46,2
- Weight [kg]: 5,6
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 27,8
- Packaging width [cm]: 27,8
- Packaging height [cm]: 12,2
- Drilled: no
- Condition: New
More
£ 20,67
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 60222C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 251,8
- Brake Disc Type: Vented
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 79
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,7
- Height [mm]: 26
- Surface: Painted
- for OE number: 4351226031
- Drilled: no
- Condition: New
More
£ 22,55
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 1163106600
Details
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25
- Drilled: no
- Condition: New
More
£ 25,84
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 60-02-222
Details
- Fitting Position: Front Axle
- Diameter [mm]: 251,8
- Brake Disc Type: Vented
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 79
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,7
- Height [mm]: 26
- Drilled: no
- Condition: New
More
£ 26,31
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: DI-222
Details
- Fitting Position: Front Axle
- Diameter [mm]: 251,8
- Brake Disc Type: Vented
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 79
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,7
- Height [mm]: 26
- Drilled: no
- Condition: New
More
£ 26,31
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 6404 10
Details
- Fitting Position: Front Axle
- Diameter [mm]: 252
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,7
- Centering Diameter [mm]: 79
- Height [mm]: 26
- Weight [kg]: 4,12
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
-13%
compared to RRP:
£ 31,00
£ 26,78
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: DI-222C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 251,8
- Brake Disc Type: Vented
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 79
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,7
- Height [mm]: 26
- Surface: Painted
- for OE number: 4351226031
- Drilled: no
- Condition: New
More
£ 27,72
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 60-02-270C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 257,3
- Brake Disc Type: Vented
- Construction Year from: 12/1982
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 84
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 24
- Brake System: AKEBONO
- Height [mm]: 47,4
- Surface: Painted
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 28,66
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 60270
Details
- Fitting Position: Front Axle
- Diameter [mm]: 257,3
- Brake Disc Type: Vented
- Construction Year from: 12/1982
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 84
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 24
- Brake System: AKEBONO
- Height [mm]: 47,4
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 28,66
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 98550
Details
- Fitting Position: Front Axle, A1
- Condition: New
More
£ 30,07
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 6404.10
Details
- Fitting Position: Front Axle
- Diameter [mm]: 252
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,7
- Centering Diameter [mm]: 79
- Height [mm]: 26
- Weight [kg]: 4,12
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£ 30,54
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 60-02-268C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256,7
- Brake Disc Type: Vented
- Construction Year from: 12/1982
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 84
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 23
- Height [mm]: 46,3
- Surface: Painted
- Tightening Torque [Nm]: 147
- Test Mark: ECE R90 APPROVED
- for OE number: 4351235180
- Drilled: no
- Condition: New
More
£ 33,36
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 6405.10
Details
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 84
- Height [mm]: 46,5
- Weight [kg]: 5,58
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£ 33,36
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 60-02-270
Details
- Fitting Position: Front Axle
- Diameter [mm]: 257,3
- Brake Disc Type: Vented
- Construction Year from: 12/1982
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 84
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 24
- Brake System: AKEBONO
- Height [mm]: 47,4
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 33,36
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 1031144
Details
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 84
- Height [mm]: 47
- Drilled: no
- Condition: New
More
£ 33,83
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 41 products