Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Wheel hub Corona RT104 2.0 (RT104) 88 hp Petrol
- Wheel bearing Corona RT104 2.0 (RT104) 88 hp Petrol
- Top strut mount and bearing Corona RT104 2.0 (RT104) 88 hp Petrol
- Anti-roll bar link Corona RT104 2.0 (RT104) 88 hp Petrol
- Engine mount Corona RT104 2.0 (RT104) 88 hp Petrol
- Track rod end Corona RT104 2.0 (RT104) 88 hp Petrol
- ABS sensor Corona RT104 2.0 (RT104) 88 hp Petrol
- Ball joint Corona RT104 2.0 (RT104) 88 hp Petrol
- Suspension bushes Corona RT104 2.0 (RT104) 88 hp Petrol
- Shock absorber dust cover and bump stops Corona RT104 2.0 (RT104) 88 hp Petrol
- Anti-roll bar bushes CORONA 2.0 (RT104) 88 hp Petrol
- Axle bushes CORONA 2.0 (RT104) 88 hp Petrol
- Wheel bolts and wheel nuts CORONA 2.0 (RT104) 88 hp Petrol
- Camber bolts CORONA 2.0 (RT104) 88 hp Petrol
- Wheel nuts CORONA 2.0 (RT104) 88 hp Petrol
- Shaft seal, wheel hub CORONA 2.0 (RT104) 88 hp Petrol
- Wiper and washer system
Wheel hub Corona RT104 2.0 88 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
TOYOTA CORONA (RT1_) 2.0 (RT104) year of manufacture 1976, 88 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Bolt Hole Circle Ø [mm]: 100
- Inner Diameter [mm]: 29
- Diameter [mm]: 40
- Bearing Type: Tapered Roller Bearing
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Rim Hole Number: 4
- Number of Teeth: 24
- Diameter [mm]: 125
- Supplementary Article / Supplementary Info: without accessories
- Thread Size: M12X1,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front axle both sides
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Number of Teeth: 26
- Diameter [mm]: 40
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front axle both sides
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Number of Teeth: 24
- Outer Diameter 2 [mm]: 125
- Diameter [mm]: 54
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Rim Hole Number: 4
- Number of Teeth: 24
- Diameter [mm]: 125
- Supplementary Article / Supplementary Info: without accessories
- Thread Size: M12X1,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 105
- Number of Teeth: 28
- Diameter [mm]: 129
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Packaging length [cm]: 14,1
- Packaging width [cm]: 14,1
- Packaging height [cm]: 13,7
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Height [mm]: 90
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Packaging length [cm]: 11,5
- Packaging width [cm]: 11,5
- Packaging height [cm]: 8,0
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle Left, Rear Axle Right
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor, with wheel bearing
- Number of Holes: 5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 108
- Number of Teeth: 28
- Weight [kg]: 1,95
- Weight [g]: 1950
- Width [mm]: 78,6
- Quantity per axle: 2
- Diameter [mm]: 129,5
- for wheel bearing diameter [mm]: 45
- Thread Size: M12x1.25
- Number of Teeth on input shaft: 28
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front axle both sides
- Rim Hole Number: 4
- Width [mm]: 90
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front axle both sides
- Rim Hole Number: 5
- Inner Diameter [mm]: 26
- Diameter [mm]: 138,9
- Condition: New
Over 100 in stock
