Car part
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Suspension arm Corolla E80 1.3 (AE80) 65 hp Petrol
- Wheel hub Corolla E80 1.3 (AE80) 65 hp Petrol
- Wheel bearing Corolla E80 1.3 (AE80) 65 hp Petrol
- Top strut mount and bearing Corolla E80 1.3 (AE80) 65 hp Petrol
- Anti-roll bar link Corolla E80 1.3 (AE80) 65 hp Petrol
- Track rod end Corolla E80 1.3 (AE80) 65 hp Petrol
- Inner tie rod Corolla E80 1.3 (AE80) 65 hp Petrol
- Ball joint Corolla E80 1.3 (AE80) 65 hp Petrol
- Suspension bushes Corolla E80 1.3 (AE80) 65 hp Petrol
- Anti-roll bar bushes Corolla E80 1.3 (AE80) 65 hp Petrol
- Wheel bolts and wheel nuts COROLLA 1.3 (AE80) 65 hp Petrol
- Wheel spacers COROLLA 1.3 (AE80) 65 hp Petrol
- Steering rack boot COROLLA 1.3 (AE80) 65 hp Petrol
- Wiper and washer system
Wheel hub Corolla E80 1.3 (AE80) 65 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
TOYOTA COROLLA (_E8_) 1.3 (AE80) year of manufacture 1985, 65 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Bolt Hole Circle Ø [mm]: 100
- Inner Diameter [mm]: 29
- Diameter [mm]: 40
- Bearing Type: Tapered Roller Bearing
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Height [mm]: 90
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Packaging length [cm]: 11,5
- Packaging width [cm]: 11,5
- Packaging height [cm]: 8,0
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 108
- Number of Teeth: 28
- Weight [kg]: 1,95
- Weight [g]: 1950
- Width [mm]: 78,6
- Quantity per axle: 2
- Diameter [mm]: 129,5
- for wheel bearing diameter [mm]: 45
- Thread Size: M12x1.25
- Number of Teeth on input shaft: 28
- Condition: New
Over 100 in stock