Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Toyota Camry XV40 2.4 (ACV40) 158 hp Petrol
- Brake pads Toyota Camry XV40 2.4 (ACV40) 158 hp Petrol
- Brake caliper Toyota Camry XV40 2.4 (ACV40) 158 hp Petrol
- Drum brake Toyota Camry XV40 2.4 (ACV40) 158 hp Petrol
- ABS sensor Toyota Camry XV40 2.4 (ACV40) 158 hp Petrol
- Brake caliper repair kit Toyota Camry XV40 2.4 (ACV40) 158 hp Petrol
- Handbrake Toyota Camry XV40 2.4 (ACV40) 158 hp Petrol
- Brake shoes Toyota Camry XV40 2.4 (ACV40) 158 hp Petrol
- Brake hose Toyota Camry XV40 2.4 (ACV40) 158 hp Petrol
- Master cylinder Toyota Camry XV40 2.4 (ACV40) 158 hp Petrol
- Handbrake cable CAMRY 2.4 (ACV40) 158 hp Petrol
- Guide sleeve kit, brake caliper CAMRY 2.4 (ACV40) 158 hp Petrol
- Handbrake shoes CAMRY 2.4 (ACV40) 158 hp Petrol
- Brake fluid CAMRY 2.4 (ACV40) 158 hp Petrol
- Brake pad fitting kit CAMRY 2.4 (ACV40) 158 hp Petrol
- Accessory kit, brake shoes CAMRY 2.4 (ACV40) 158 hp Petrol
- Brake pads and discs CAMRY 2.4 (ACV40) 158 hp Petrol
- Brake light switch CAMRY 2.4 (ACV40) 158 hp Petrol
- Abs ring CAMRY 2.4 (ACV40) 158 hp Petrol
- Brake caliper piston CAMRY 2.4 (ACV40) 158 hp Petrol
- Lateral and longitudinal acceleration sensor CAMRY 2.4 (ACV40) 158 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Toyota Camry XV40 2.4 (ACV40) 158 hp Petrol

Article №: 61247
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: solid
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 62
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Height [mm]: 66
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 29,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 61247C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: solid
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 62
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Height [mm]: 66
- Surface: Painted
- Test Mark: ECE R90 APPROVED
- for OE number: 4243106110
- Drilled: no
- Condition: New
More
£ 29,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 231 774
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 28
- Height [mm]: 49,3
- Condition: New
More
£ 29,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 8DD 355 117-431
Details
-
- Fitting Position: Front Axle
- Construction Year to: 07/2011
- Diameter [mm]: 296
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/07
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25
- Centering Diameter [mm]: 62
- Height [mm]: 49
- Weight [kg]: 7,3
- Technical Information Number: 55350
- Supplementary Article / Supplementary Info Info 2: without wheel studs, without wheel hub
- Drilled: no
- Condition: New
More
£ 30,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 0 986 479 617
Details
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25
- Wheel Hub Diameter [mm]: 62
- Height [mm]: 49,2
- Surface: Oiled
- Bore Diameter up to [mm]: 14,5
- Drilled: no
- Condition: New
More
£ 32,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 8120 131060
Details
- Diameter [mm]: 281
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Centering Diameter [mm]: 62
- Height [mm]: 66,8
- Drilled: no
- Condition: New
More
£ 33,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 30-15 521 0065/PD
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 14.5
- Bolt Hole Circle Ø [mm]: 114.3
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25
- Centering Diameter [mm]: 62
- Height [mm]: 49,2
- Surface: UV paint coated
- Drilled: no
- Condition: New
More
£ 34,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: J3312087
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Wheel Hub Diameter [mm]: 62
- Height [mm]: 66,8
- Drilled: no
- Condition: New
More
£ 34,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 8120 131060C
Details
- Product line: COATED
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Centering Diameter [mm]: 62
- Height [mm]: 66,8
- Drilled: no
- Condition: New
More
£ 34,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 128341FCAL
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,50
- Centering Diameter [mm]: 62
- Height [mm]: 66,9
- Weight [kg]: 4,61
- Surface: Coated
- Condition: New
More
£ 35,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: DP-248C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Number of bores: 4
- Bolt Hole Circle Ø [mm]: 55
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Height [mm]: 60
- Surface: Painted
- Tightening Torque [Nm]: 103
- Test Mark: ECE R90 APPROVED
- for OE number: 4243112190
- Drilled: no
- Condition: New
More
£ 35,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 92240203
Details
- Product line: PRO
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/08
- Wheel Bolt Bore Diameter [mm]: 14,5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Centering Diameter [mm]: 62
- Inner Diameter [mm]: 170
- Height [mm]: 66,8
- Weight [kg]: 4,8
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 29,3
- Packaging width [cm]: 29,3
- Packaging height [cm]: 16,5
- Drilled: no
- Condition: New
More
£ 36,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 603911
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25
- Centering Diameter [mm]: 62
- Height [mm]: 49,3
- Thread Size: 14,6
- Thread Size 1: 14,6
- Condition: New
More
£ 37,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 0 986 479 S22
Details
-
- Construction Year from: 06/2006
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25
- Centering Diameter [mm]: 62
- Height [mm]: 49,2
- Surface: Oiled
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14,4
- Drilled: no
- Condition: New
More
£ 37,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: DI-2006C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5
- Construction Year from: 07/2009
- Bolt Hole Circle Ø [mm]: 62
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 26
- Height [mm]: 50
- Surface: Painted
- Test Mark: ECE R90 APPROVED
- for OE number: 435120R020
- Drilled: no
- Condition: New
More
£ 38,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 24012801591-PCS-MSP
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5
- Construction Year to: 08/2011
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25
- Centering Diameter [mm]: 62
- Inner Diameter [mm]: 145
- Height [mm]: 49,2
- Required quantity: 2
- Bore Diameter [mm]: 14,5
- Net weight [kg]: 7,69
- Gross Weight [kg]: 7,79
- Condition: New
More
£ 39,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 197281
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25
- Centering Diameter [mm]: 62
- Height [mm]: 49
- Weight [kg]: 7,7
- Number of mounting bores: 2
- Test Mark: ECE-R90
- Drilled: no
- Condition: New
More
£ 39,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 600 608
Details
- Fitting Position: Front Axle
- Diameter [mm]: 275
- Brake Disc Type: Vented
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 55
- Height [mm]: 49,2
- Surface: Coated
- Replace in pairs only
- Drilled: no
- Condition: New
More
£ 40,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: MDC2368
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/08
- Wheel Bolt Bore Diameter [mm]: 14,5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Centering Diameter [mm]: 62
- Inner Diameter [mm]: 170
- Height [mm]: 66,8
- Weight [kg]: 4,8
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 29,3
- Packaging width [cm]: 29,3
- Packaging height [cm]: 16,5
- Drilled: no
- Condition: New
More
£ 40,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 19-1866MAX
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25, 25,0
- Centering Diameter [mm]: 62
- Height [mm]: 49,3
- Surface: Painted, Coated
- Test Mark: E1 90R 02 C0176/0492
- Drilled: no
- Condition: New
More
£ 41,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: V70-80030
Details
-
- Construction Year to: 08/2011
- Fitting Position: Front Axle
- Supplementary Info: Original VAICO Quality
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25
- Centering Diameter [mm]: 62
- Height [mm]: 49,2
- Weight [kg]: 7,76
- Brake Disc Hub Height [mm]: 21
- Packaging width [cm]: 29,7
- Packaging height [cm]: 5
- Packaging Depth [cm]: 29,8
- Drilled: no
- Condition: New
More
£ 42,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 61327.00
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Centering Diameter [mm]: 62
- Height [mm]: 66,8
- Weight [kg]: 4,82
- Drilled: no
- Condition: New
More
£ 43,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: C32154ABE-P
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25
- Centering Diameter [mm]: 62
- Height [mm]: 49,3
- Surface: Coated
- Thread Size: 14,6
- Condition: New
More
£ 46,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 61189.10
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25
- Centering Diameter [mm]: 62
- Height [mm]: 49,3
- Weight [kg]: 7,44
- Drilled: no
- Condition: New
More
£ 48,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 3145159
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: solid
- Rim Hole Number: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Centering Diameter [mm]: 62
- Height [mm]: 66,8
- Surface: Coated
- Net weight [kg]: 4,83
- Drilled: no
- Condition: New
More
£ 50,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 178 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8