Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Wheel hub Camry V10 1.8 Turbo-D (CV10_) 73 hp Diesel
- Wheel bearing Camry V10 1.8 Turbo-D (CV10_) 73 hp Diesel
- Top strut mount and bearing Camry V10 1.8 Turbo-D (CV10_) 73 hp Diesel
- Anti-roll bar link Camry V10 1.8 Turbo-D (CV10_) 73 hp Diesel
- Engine mount Camry V10 1.8 Turbo-D (CV10_) 73 hp Diesel
- Track rod end Camry V10 1.8 Turbo-D (CV10_) 73 hp Diesel
- Inner tie rod Camry V10 1.8 Turbo-D (CV10_) 73 hp Diesel
- Ball joint Camry V10 1.8 Turbo-D (CV10_) 73 hp Diesel
- Suspension bushes Camry V10 1.8 Turbo-D (CV10_) 73 hp Diesel
- Shock absorber dust cover and bump stops Camry V10 1.8 Turbo-D (CV10_) 73 hp Diesel
- Anti-roll bar bushes CAMRY 1.8 Turbo-D (CV10_) 73 hp Diesel
- Wheel bolts and wheel nuts CAMRY 1.8 Turbo-D (CV10_) 73 hp Diesel
- Steering rack boot CAMRY 1.8 Turbo-D (CV10_) 73 hp Diesel
- Camber bolts CAMRY 1.8 Turbo-D (CV10_) 73 hp Diesel
- Wheel nuts CAMRY 1.8 Turbo-D (CV10_) 73 hp Diesel
- Mounting, shock absorbers CAMRY 1.8 Turbo-D (CV10_) 73 hp Diesel
- Nut, stub axle CAMRY 1.8 Turbo-D (CV10_) 73 hp Diesel
- Shaft seal, wheel hub CAMRY 1.8 Turbo-D (CV10_) 73 hp Diesel
- Wiper and washer system
Anti-roll bar bushes Camry V10 1.8 Turbo-D (CV10_) 73 hp Diesel
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
TOYOTA Camry Saloon (_V1_) 1.8 Turbo-D (CV10_) year of manufacture 1982, 73 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front axle both sides
- Inner Diameter [mm]: 22
- Packaging width [cm]: 6,3
- Packaging height [cm]: 6,0
- Nominal diameter [mm]: 22,2
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right
- for OE number: 48815-42090
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Mounting Type: Rubber Mount
- for OE number: 5094A7
- Condition: New
Over 100 in stock
Anti roll bar bush Front Axle, inner, Rubber Mount, 23,5 mm x 40 mm, Stabiliser Bar Ø: 25 mm (SASIC)
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, inner
- Inner Diameter [mm]: 23,5
- Length [mm]: 41
- Stabiliser Diameter [mm]: 25
- Width [mm]: 40
- Mounting Type: Rubber Mount
- for OE number: 4881552030
- Height [mm]: 40
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front axle both sides
- Inner Diameter [mm]: 23
- Packaging width [cm]: 6,2
- Packaging height [cm]: 6,1
- Nominal diameter [mm]: 23
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 27
- Material: Rubber
- Observe service information
- for OE number: 48815-60350
- Weight [kg]: 0,08
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, inner
- Material: Rubber
- Observe service information
- Weight [kg]: 0,06
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Length [mm]: 44,5
- Diameter [mm]: 22
- Height [mm]: 42
- Packing Type: Box
- Packaging length [cm]: 4,2
- Packaging width [cm]: 4,5
- Packaging height [cm]: 4
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front axle both sides
- Inner Diameter [mm]: 25
- Packaging width [cm]: 6,4
- Packaging height [cm]: 5,9
- Nominal diameter [mm]: 23
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 22
- Length [mm]: 39
- Stabiliser Diameter [mm]: 24
- Required quantity: 2
- Mounting Type: Rubber Mount
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 26
- Packaging length [cm]: 5,5
- Packaging width [cm]: 4,5
- Packaging height [cm]: 4,2
- Condition: New
Over 100 in stock
