Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs TOYOTA Camry VII Saloon (_V5_) 3.5 (GSV50_) 249 hp Petrol
- Brake pads TOYOTA Camry VII Saloon (_V5_) 3.5 (GSV50_) 249 hp Petrol
- Drum brake TOYOTA Camry VII Saloon (_V5_) 3.5 (GSV50_) 249 hp Petrol
- ABS sensor TOYOTA Camry VII Saloon (_V5_) 3.5 (GSV50_) 249 hp Petrol
- Brake caliper repair kit TOYOTA Camry VII Saloon (_V5_) 3.5 (GSV50_) 249 hp Petrol
- Handbrake TOYOTA Camry VII Saloon (_V5_) 3.5 (GSV50_) 249 hp Petrol
- Brake shoes TOYOTA Camry VII Saloon (_V5_) 3.5 (GSV50_) 249 hp Petrol
- Brake hose TOYOTA Camry VII Saloon (_V5_) 3.5 (GSV50_) 249 hp Petrol
- Handbrake cable TOYOTA Camry VII Saloon (_V5_) 3.5 (GSV50_) 249 hp Petrol
- Guide sleeve kit, brake caliper TOYOTA Camry VII Saloon (_V5_) 3.5 (GSV50_) 249 hp Petrol
- Brake fluid CAMRY 3.5 (GSV50_) 249 hp Petrol
- Handbrake shoes CAMRY 3.5 (GSV50_) 249 hp Petrol
- Brake pad fitting kit CAMRY 3.5 (GSV50_) 249 hp Petrol
- Accessory kit, brake shoes CAMRY 3.5 (GSV50_) 249 hp Petrol
- Brake pads and discs CAMRY 3.5 (GSV50_) 249 hp Petrol
- Brake light switch CAMRY 3.5 (GSV50_) 249 hp Petrol
- Brake shoe adjuster CAMRY 3.5 (GSV50_) 249 hp Petrol
- Brake caliper piston CAMRY 3.5 (GSV50_) 249 hp Petrol
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs TOYOTA Camry VII Saloon (_V5_) 3.5 (GSV50_) 249 hp Petrol
Article №: DP-248
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Number of bores: 4
- Bolt Hole Circle Ø [mm]: 55
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Height [mm]: 60
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£17,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 61-02-248
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Number of bores: 4
- Bolt Hole Circle Ø [mm]: 55
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Height [mm]: 60
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£24,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: C42059ABE
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 280
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 62
- Height [mm]: 67
- Vehicle Production Country: Japan
- Drilled: no
- Condition: New
More
£24,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: DDF2987C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Centering Diameter [mm]: 62
- Height [mm]: 66,8
- Weight [kg]: 9,85
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 290
- Packaging height [cm]: 135
- Drilled: no
- Condition: New
More
£24,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 19-2209
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Centering Diameter [mm]: 62
- Height [mm]: 66,8
- Surface: Painted
- Colour: black
- Vehicle Production Country: Japan
- Test Mark: E1 90R-02 C0204/0641
- Thread Size 1: 14,5
- Thread Size 2: 10,5
- Drilled: no
- Condition: New
More
£25,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 61-02-248C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Number of bores: 4
- Bolt Hole Circle Ø [mm]: 55
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Height [mm]: 60
- Surface: Painted
- Tightening Torque [Nm]: 103
- Test Mark: ECE R90 APPROVED
- for OE number: 4243112190
- Drilled: no
- Condition: New
More
£25,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 61248
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Number of bores: 4
- Bolt Hole Circle Ø [mm]: 55
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Height [mm]: 60
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£25,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 09.A417.10
Details
-
- Fitting Position: Front Axle
- Vehicle Production Country: Japan
- Product line: Prime
- Diameter [mm]: 296
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25
- Centering Diameter [mm]: 62
- Height [mm]: 49
- Tightening Torque [Nm]: 103
- Drilled: no
- Condition: New
More
£27,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BD2861
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25
- Centering Diameter [mm]: 62
- Height [mm]: 49,2
- Surface: Painted
- Colour: black
- Thread Size 1: 14,7
- Thread Size 2: M8
- Drilled: no
- Condition: New
More
£27,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 600 616
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 62
- Height [mm]: 66,8
- Surface: Coated
- Replace in pairs only
- Drilled: no
- Condition: New
More
£28,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: DP-247C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: solid
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 62
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Height [mm]: 66
- Surface: Painted
- Test Mark: ECE R90 APPROVED
- for OE number: 4243106110
- Drilled: no
- Condition: New
More
£29,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 562748JC
Details
-
- Fitting Position: Rear Axle
- Vehicle Production Country: Japan
- Diameter [mm]: 281
- Brake Disc Type: solid
- Number of Holes: 5
- Hole Arrangement/Number: 5+3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Centering Diameter [mm]: 62
- Height [mm]: 66,8
- Weight [kg]: 9,99
- Surface: Coated
- Version: JC
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 30
- Packaging width [cm]: 30
- Packaging height [cm]: 16
- Drilled: no
- Condition: New
More
£29,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 08.B566.10
Details
-
- Fitting Position: Rear Axle
- Vehicle Production Country: Japan
- Product line: Prime
- Diameter [mm]: 281
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Centering Diameter [mm]: 62
- Height [mm]: 67
- Drilled: no
- Condition: New
More
£29,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 231-03-191-2
Details
-
- Fitting Position: Front Axle
- Vehicle Production Country: Japan
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 62
- Height [mm]: 49,2
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£30,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 30H2111-JPN
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 62
- Height [mm]: 49,3
- Thread Size: 14,6
- Drilled: no
- Condition: New
More
£30,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 6043912
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 62
- Height [mm]: 49,2
- Production Number: S6043912
- Drilled: no
- Condition: New
More
£31,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 61247
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: solid
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 62
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Height [mm]: 66
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£32,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 61247C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: solid
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 62
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Height [mm]: 66
- Surface: Painted
- Test Mark: ECE R90 APPROVED
- for OE number: 4243106110
- Drilled: no
- Condition: New
More
£32,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 8DD 355 117-431
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/07
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25
- Centering Diameter [mm]: 62
- Height [mm]: 49
- Weight [kg]: 7,3
- Technical Information Number: 55350
- Supplementary Article / Supplementary Info Info 2: without wheel studs, without wheel hub
- Drilled: no
- Condition: New
More
£32,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 61-02-247C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: solid
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 62
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Height [mm]: 66
- Surface: Painted
- Test Mark: ECE R90 APPROVED
- for OE number: 4243106110
- Drilled: no
- Condition: New
More
£33,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: DP-247
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: solid
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 62
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Height [mm]: 66
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£33,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: C32154ABE
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25
- Centering Diameter [mm]: 62
- Height [mm]: 49,3
- Surface: Coated
- Thread Size: 14,6
- Drilled: no
- Condition: New
More
£34,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 61-02-247
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 281
- Brake Disc Type: solid
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 62
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Height [mm]: 66
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£38,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SKBD-0020310
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 14,5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 62
- Height [mm]: 49
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
£39,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 19-1866MAX
Details
-
- Fitting Position: Front Axle
- Vehicle Production Country: Japan
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 25, 25,0
- Centering Diameter [mm]: 62
- Height [mm]: 49,3
- Surface: Painted, Coated
- Test Mark: E1 90R 02 C0176/0492
- Drilled: no
- Condition: New
More
£43,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 154 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
