Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
-
Exhaust
- Lambda sensor Toyota Avensis t25 2.0VVT-i (AZT250_) 147 hp Petrol
- Turbo Toyota Avensis t25 2.0VVT-i (AZT250_) 147 hp Petrol
- Catalytic converter Toyota Avensis t25 2.0VVT-i (AZT250_) 147 hp Petrol
- Exhaust silencer Toyota Avensis t25 2.0VVT-i (AZT250_) 147 hp Petrol
- Mounting kit, exhaust system Toyota Avensis t25 2.0VVT-i (AZT250_) 147 hp Petrol
- Exhaust pipe Toyota Avensis t25 2.0VVT-i (AZT250_) 147 hp Petrol
- Exhaust hanger Toyota Avensis t25 2.0VVT-i (AZT250_) 147 hp Petrol
- Exhaust manifold gasket Toyota Avensis t25 2.0VVT-i (AZT250_) 147 hp Petrol
- Exhaust gasket Toyota Avensis t25 2.0VVT-i (AZT250_) 147 hp Petrol
- Exhaust clamp Toyota Avensis t25 2.0VVT-i (AZT250_) 147 hp Petrol
- Middle silencer AVENSIS 2.0VVT-i (AZT250_) 147 hp Petrol
- Silencer rubber AVENSIS 2.0VVT-i (AZT250_) 147 hp Petrol
- Catalytic converter mounting kit AVENSIS 2.0VVT-i (AZT250_) 147 hp Petrol
- Silencer mounting kit AVENSIS 2.0VVT-i (AZT250_) 147 hp Petrol
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Lambda sensor Toyota Avensis t25 2.0 VVT-i (AZT250_) 147 hp Petrol
Article №: 09SKV011
Details
-
- Oxygen Sensor: Regulating Probe
- TecDoc Engine Number: 1AZ-FSE
- Oxygen Sensor: Oxygen Sensor
- Length [mm]: 392
- Number of circuits: 4
- Weight [kg]: 0,13
- Voltage [V]: 12
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.)
- Condition: New
More
£ 24,48
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 466016355046
Details
- Oxygen Sensor: Heated
- Cable Length [mm]: 800
- Length [mm]: 800
- Number of circuits: 4
- Conductor Number: 4
- Condition: New
More
£ 34,30
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DOX-0109
Details
-
- Oxygen Sensor: Regulating Probe, Diagnostic Probe
- Fitting Position: Left, Right
- Exhaust System: for pre-catalytic converter
- Product line: Universal fit
- Oxygen Sensor: Heated, Oxygen Sensor
- Thread Size: M18x1,5, M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Quality: OE
- Weight [g]: 103
- Gross Weight [g]: 147
- Condition: New
More
-58%
compared to RRP:
£ 83,67
£ 34,77
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: XLOS2004
Details
- Oxygen Sensor: Oxygen Sensor
- Fitting Position: Rear, before catalytic converter
- Cable Length [mm]: 500
- Number of pins: 4
- Weight [kg]: 0,12
- Technical Information Number: Sensor Type:Planar
- Condition: New
More
-52%
compared to RRP:
£ 74,19
£ 35,24
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: J1462007
Details
-
- Oxygen Sensor: Regulating Probe
- Observe technical data
- Oxygen Sensor: Heated
- Cable Length [mm]: 350
- Number of circuits: 4
- Condition: New
More
-74%
compared to RRP:
£ 142,57
£ 36,18
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08997
Details
- Oxygen Sensor: Oxygen Sensor
- Number of pins: 4
- Length [mm]: 650
- Condition: New
More
£ 37,12
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ES20118-12B1
Details
-
- Fitting Position: Left, Right, Front, before catalytic converter
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Planar probe, Heated
- Cable Length [mm]: 369
- Condition: New
More
£ 37,12
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V70-76-0009
Details
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: Left, Exhaust Manifold
- Product line: Original Quality
- Oxygen Sensor: Finger probe, Thread pre-greased
- Number of pins: 4
- Length [mm]: 570
- Line insulation design: with silicone-coated woven-fibre insulation
- Packaging height [cm]: 9,2
- Condition: New
More
£ 37,59
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ES20157-12B1
Details
-
- Fitting Position: Left, Right, Front, before catalytic converter
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Planar probe, Heated
- Cable Length [mm]: 492
- Condition: New
More
£ 37,59
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1952
Details
-
- TecDoc Engine Number: 1AZ-FSE
- Oxygen Sensor: Regulating Probe
- Fitting Position: Left
- Product line: Universal
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Condition: New
More
£ 38,06
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 9 7163 1
Details
- Oxygen Sensor: Planar probe
- Cable Length [mm]: 240
- Number of circuits: 4
- Voltage [V]: 12
- Condition: New
More
£ 39,00
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 81536
Details
- Oxygen Sensor: Regulating Probe, Diagnostic Probe
- Cable Length [mm]: 720
- Number of pins: 4
- for OE number: 8946533340
- Condition: New
More
£ 40,41
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 258 986 602
Details
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter, Front
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter, Rear
- Number of circuits: 4
- Recommended change interval [km]: 160000
- Connector/Clamp: Connector may need adjustment
- Condition: New
More
£ 44,64
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09SKV913
Details
- Oxygen Sensor: Oxygen Sensor
- Number of circuits: 4
- Weight [kg]: 0,09
- Voltage [V]: 12
- Resistor [Ohm]: 13
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.)
- Condition: New
More
£ 45,11
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 81584
Details
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: Left
- Oxygen Sensor: Heated
- Fitting Position: Exhaust Manifold
- Cable Length [mm]: 500
- Number of pins: 4
- for OE number: 8946512540
- Condition: New
More
£ 48,40
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: EOS-9055
Details
- Oxygen Sensor: Unheated, Finger probe
- Thread Size: M18x1,5
- Fitting Position: Front, after catalytic converter
- Number of pins: 4
- Length [mm]: 660
- Condition: New
More
£ 49,34
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V70-76-0016
Details
- Supplementary Info: Original VEMO Quality
- Oxygen Sensor: Regulating Probe, Thread pre-greased
- Thread Size: M18 x 1,5, M18x1,5
- Fitting Position: before catalytic converter
- Cable Length [mm]: 350
- Number of pins: 4
- Length [mm]: 580
- Number of circuits: 4
- for OE number: 89465 0D040
- Line insulation design: with silicone-coated woven-fibre insulation
- Socket colour: grey
- Packaging height [cm]: 9,2
- Condition: New
More
£ 50,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: LS140498
Details
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: Left Front, Right Front
- Length [mm]: 865
- Number of connectors: 4
- Condition: New
More
-34%
compared to RRP:
£ 77,76
£ 51,22
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V70-76-0018
Details
- Supplementary Info: Original VEMO Quality
- Oxygen Sensor: Regulating Probe, Thread pre-greased
- Thread Size: M18 x 1,5, M18x1,5
- Fitting Position: Left, before catalytic converter
- Cable Length [mm]: 450
- Number of pins: 4
- Length [mm]: 480
- Number of circuits: 4
- for OE number: 89465 05110
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Connector Shape: angular
- Line insulation design: with silicone-coated woven-fibre insulation
- Packaging height [cm]: 2,16
- Condition: New
More
£ 52,16
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 59-0014
Details
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: Front, before catalytic converter
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: Rear
- Oxygen Sensor: Finger probe
- Number of circuits: 4
- Transmission Type: Manual Transmission
- Connector/Clamp: Connector may need adjustment
- Condition: New
More
£ 54,51
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V70-76-0019
Details
- Supplementary Info: Original VEMO Quality
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Thread Size: M18 x 1,5, M18x1,5
- Fitting Position: after catalytic converter
- Cable Length [mm]: 800
- Number of pins: 4
- Length [mm]: 800
- Number of circuits: 4
- Required quantity: 2
- for OE number: 89465 30430
- Connector Shape: angular
- Line insulation design: with silicone-coated woven-fibre insulation
- Socket colour: grey
- Packaging height [cm]: 2,1
- Condition: New
More
£ 54,51
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 01759
Details
- Oxygen Sensor: Regulating Probe
- Number of pins: 4
- Length [mm]: 580
- Condition: New
More
£ 55,92
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-76-0001
Details
-
- TecDoc Engine Number: 1AZ-FSE
- Oxygen Sensor: Regulating Probe
- Fitting Position: Left
- Supplementary Info: EXPERT KITS +
- Oxygen Sensor: Finger probe, Heated, Thread pre-greased
- Fitting Position: after catalytic converter
- Cable Length [mm]: 210
- Number of pins: 4
- Length [mm]: 350
- Number of circuits: 4
- for OE number: V99760001
- Supplementary Article / Supplementary Info Info 2: without plug
- Line insulation design: with silicone-coated woven-fibre insulation
- Packaging height [cm]: 9,2
- Condition: New
More
-59%
compared to RRP:
£ 143,56
£ 58,27
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09SKV583
Details
- Oxygen Sensor: Regulating Probe, Diagnostic Probe
- Length [mm]: 410
- Number of circuits: 4
- Weight [kg]: 0,13
- Voltage [V]: 12
- Resistor [Ohm]: 13
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.)
- Condition: New
More
£ 58,74
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-76-0002
Details
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Fitting Position: Front, before catalytic converter
-
- Fitting Position: Rear, before catalytic converter
- Supplementary Info: EXPERT KITS +
- Oxygen Sensor: Planar probe, Heated, Thread pre-greased
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0,09
- Supplementary Article / Supplementary Info Info 2: without plug
- Line insulation design: with silicone-coated woven-fibre insulation
- Packaging height [cm]: 9,2
- Condition: New
More
-60%
compared to RRP:
£ 159,61
£ 62,97
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 271 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
