Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Suzuki Vitara LY 1.0 AllGrip (APK 310) 111 hp Petrol
- Brake pads Suzuki Vitara LY 1.0 AllGrip (APK 310) 111 hp Petrol
- Brake caliper Suzuki Vitara LY 1.0 AllGrip (APK 310) 111 hp Petrol
- ABS sensor Suzuki Vitara LY 1.0 AllGrip (APK 310) 111 hp Petrol
- Brake caliper repair kit Suzuki Vitara LY 1.0 AllGrip (APK 310) 111 hp Petrol
- Handbrake Suzuki Vitara LY 1.0 AllGrip (APK 310) 111 hp Petrol
- Brake caliper carrier Suzuki Vitara LY 1.0 AllGrip (APK 310) 111 hp Petrol
- Master cylinder Suzuki Vitara LY 1.0 AllGrip (APK 310) 111 hp Petrol
- Brake hose Suzuki Vitara LY 1.0 AllGrip (APK 310) 111 hp Petrol
- Handbrake cable Suzuki Vitara LY 1.0 AllGrip (APK 310) 111 hp Petrol
- Guide sleeve kit, brake caliper VITARA 1.0 AllGrip (APK 310) 111 hp Petrol
- Brake fluid VITARA 1.0 AllGrip (APK 310) 111 hp Petrol
- Brake pad fitting kit VITARA 1.0 AllGrip (APK 310) 111 hp Petrol
- Brake servo VITARA 1.0 AllGrip (APK 310) 111 hp Petrol
- Brake pads and discs VITARA 1.0 AllGrip (APK 310) 111 hp Petrol
- Brake caliper piston VITARA 1.0 AllGrip (APK 310) 111 hp Petrol
- Brake disc bolts VITARA 1.0 AllGrip (APK 310) 111 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Suzuki Vitara LY 1.0 AllGrip (APK 310) 111 hp Petrol

Article №: 82B1436
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 259
- Brake Disc Type: solid
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 62
- Inner Diameter [mm]: 149,7
- Height [mm]: 43,2
- Surface: Uncoated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£ 25,75
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: SKBD-0023579
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 259
- Brake Disc Type: solid
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 62
- Inner Diameter [mm]: 149,7
- Height [mm]: 43,2
- Surface: Uncoated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£ 25,75
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 563141JC
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 259
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 62
- Height [mm]: 43,2
- Surface: Coated
- Number of mounting bores: 3
- Version: JC
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging length [cm]: 26
- Packaging width [cm]: 26
- Packaging height [cm]: 9,1
- Drilled: no
- Condition: New
More
£ 26,21
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: BG5283C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 62
- Height [mm]: 47
- Surface: Coated
- Machining: High-carbon
- Test Mark: E1 90R-02C0343/1788
- Condition: New
More
£ 26,67
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: ADK84345
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 259
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 43
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 62
- Weight [kg]: 3,770
- Surface: Coated
- Number of mounting bores: 3
- Observe service information
- Drilled: no
- Condition: New
More
£ 27,59
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 08.C046.11
Details
- Product line: Prime
- Fitting Position: Rear Axle
- Diameter [mm]: 259
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 62
- Height [mm]: 43
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 27,59
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 0 986 479 C44
Details
-
- Engine Code: K10C
- Fitting Position: Rear Axle
- Diameter [mm]: 259
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 62
- Height [mm]: 43,2
- Surface: Coated
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14,2
- Drilled: no
- Condition: New
More
£ 28,51
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: BDC6243
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 259
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 62
- Height [mm]: 43,2
- Surface: Coated
- Condition: New
More
£ 28,51
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 24012202901-PCS-MS
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 62
- Inner Diameter [mm]: 146,3
- Height [mm]: 47
- Required quantity: 2
- Bore Diameter [mm]: 12,7
- Net weight [kg]: 5,3
- Gross Weight [kg]: 5,5
- Drilled: no
- Condition: New
More
£ 29,43
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 18399
Details
- Product line: COATED
- Fitting Position: Rear Axle
- Diameter [mm]: 259
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 62
- Hub Diameter [mm]: 161
- Height [mm]: 43,2
- Weight [kg]: 3,54
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 30,35
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 23-1531C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 259,0
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 9,0
- Minimum thickness [mm]: 8,0
- Centering Diameter [mm]: 62,0
- Height [mm]: 43,2
- Surface: Painted
- Test Mark: ECE-R90, ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 30,81
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 563279JC
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Height [mm]: 47
- Surface: Coated
- Version: JC
- Bore Diameter [mm]: 62
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Drilled: no
- Condition: New
More
£ 31,27
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 108494
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 259
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Thickness [mm]: 43,2
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 62
- Weight [kg]: 3,770
- Surface: Coated
- Number of mounting bores: 3
- Observe service information
- Drilled: no
- Condition: New
More
£ 32,04
incl. 20% VAT, excl. delivery costs
In stock
Details


Article №: 82B1436P
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 259
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/08
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 62
- Inner Diameter [mm]: 149,7
- Height [mm]: 43,2
- Weight [kg]: 3,5
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, without wheel studs, without wheel hub
- Drilled: no
- Condition: New
More
£ 32,67
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: BR-8742-C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 62
- Hub Diameter 1 [mm]: 62
- Hub Diameter 2 [mm]: 157
- Height [mm]: 47
- Surface: Coated
- Test Mark: R90
- Drilled: no
- Condition: New
More
£ 34,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: QD7940
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 259
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 9,1
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 62
- Height [mm]: 43,3
- Surface: Painted
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14
- Drilled: no
- Condition: New
More
£ 34,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 4763101400
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Height [mm]: 47
- Surface: Coated
- Condition: New
More
£ 36,33
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: S5022V
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 62
- Height [mm]: 47
- Drilled: no
- Condition: New
More
£ 36,33
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 24010901821PR-PCS-MS
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 259
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 62
- Inner Diameter [mm]: 146,6
- Height [mm]: 43,2
- Surface: Coated
- Required quantity: 2
- Bore Diameter [mm]: 14
- Net weight [kg]: 3,54
- Drilled: no
- Condition: New
More
£ 37,25
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 23-1530C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22,0
- Minimum thickness [mm]: 20,0
- Centering Diameter [mm]: 62,0
- Height [mm]: 47
- Surface: Painted
- Test Mark: ECE-R90, ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 38,17
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 18406
Details
- Product line: COATED
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 62
- Hub Diameter [mm]: 157
- Height [mm]: 47
- Weight [kg]: 5,34
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 39,55
incl. 20% VAT, excl. delivery costs
In stock
Details


Article №: 82B1149P
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5/9
- Wheel Bolt Bore Diameter [mm]: 12,7
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 62
- Height [mm]: 47
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
£ 40,21
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: QD6913
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 62
- Height [mm]: 47
- Surface: Painted, Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 33
- Packaging width [cm]: 31,5
- Packaging height [cm]: 12
- Drilled: no
- Condition: New
More
£ 42,31
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 60-08-827C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 62
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Height [mm]: 48
- Surface: Painted
- for OE number: 5531161M00
- Drilled: no
- Condition: New
More
£ 45,53
incl. 20% VAT, excl. delivery costs
In stock
Details


Article №: GCH20864
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 259
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/08
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 62
- Inner Diameter [mm]: 149,7
- Height [mm]: 43,2
- Weight [kg]: 3,5
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Drilled: no
- Condition: New
More
£ 58,07
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 92 products
Show the next items
- 1
- 2
- 3
- 4