Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Spark plugs Suzuki Jimny SN 1.3 (SN413) 86 hp Petrol
Article №: 686S0009
Details
-
- Construction Year to: 12/2005
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0003
Details
-
- Construction Year to: 12/2005
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode, Unscrewable SAE connector
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0081
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Spark Plug: Connector Type SAE, with gasket seat
- Construction Year to: 12/2005
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Tightening angle [degrees]: 90
- Condition: New
More
£ 5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0028
Details
-
- Construction Year to: 12/2005
- Fuel Type: CNG/LPG
- Replace after km: 30000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Iridium Middle Electrode
- Thread Pitch [mm]: 1,25
- Connector type: SAE/M4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 5,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0063
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0071
Details
-
- Construction Year to: 12/2005
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0098
Details
-
- TecDoc Engine Number: M13A
- Valve control: for engines with variable valve timing
- Vehicle Identification Number (VIN) from: 100007
- External Thread [mm]: 14,0
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,5
- Spanner Size: 16 mm
- Spark Plug: Fixed SAE connector, Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
- Condition: New
More
£ 9,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0029
Details
-
- TecDoc Engine Number: M13A
- Valve control: for engines with variable valve timing
- Vehicle Identification Number (VIN) from: 100007
- Product line: LPG Laser Line
- Thread Length [mm]: 19
- Spanner Size: 16 mm
- Spark Plug: Fixed SAE connector, 1 - Earthed Electrode
- Thread Size: M14 x 1,25
- Fuel Type: CNG/LPG
- Recommended change interval [km]: 60000
- Condition: New
More
£ 10,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0064
Details
-
- Construction Year to: 12/2005
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 11,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0072
Details
-
- Construction Year to: 12/2005
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 11,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0326
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Construction Year to: 12/2005
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Tightening angle [degrees]: 90
- Condition: New
More
£ 21,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0317
Details
-
- Construction Year to: 12/2005
- Fuel Type: CNG/LPG
- Replace after km: 30000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Connector type: SAE/M4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 23,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990008
Details
-
- Construction Year to: 12/2005
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990002
Details
-
- Construction Year to: 12/2005
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode, Unscrewable SAE connector
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0009P
Details
-
- Construction Year to: 12/2005
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£ 2,78
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0003P
Details
-
- Construction Year to: 12/2005
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Number of pins: 1
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£ 2,91
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 235 667
FR 7 DCX+, Blister N06 - FR 7 DCX
Details
-
- Construction Year to: 12/2005
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 3,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 240 593
FR 6 D+, Blister N12 - FR 6 DC
Details
-
- Construction Year to: 12/2005
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 4,00
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCF860004
Details
-
- Construction Year to: 12/2005
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 4,43
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8EH 188 705-071
PM8RC-10
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 1,0
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1.25
- Tightening Torque [Nm]: 25
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£ 5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0028P
Details
-
- Construction Year to: 12/2005
- Fuel Type: CNG/LPG
- Replace after km: 30000
- Required quantity: 4
- Product line: Iridium
- Thread Length [mm]: 19
- Spark Position [mm]: 3,3
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Spark Plug: Iridium Middle Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Resistor [kOhm]: 6
- Condition: New
More
£ 5,89
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990027
Details
-
- Construction Year to: 12/2005
- Fuel Type: CNG/LPG
- Replace after km: 30000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Iridium Middle Electrode
- Thread Pitch [mm]: 1,25
- Connector type: SAE/M4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 5,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0013
Details
-
- Construction Year to: 12/2005
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,8
- Spark Plug: 3 - Earthed Electrode
- Weight [kg]: 0,052
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£ 7,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990062
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990070
Details
-
- Construction Year to: 12/2005
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 58 products
Show the next items
- 1
- 2
- 3
