Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs Subaru Legacy 3 2.5AWD (BE9) 156 hp Petrol
- Ignition coil Subaru Legacy 3 2.5AWD (BE9) 156 hp Petrol
- Ignition leads Subaru Legacy 3 2.5AWD (BE9) 156 hp Petrol
- Camshaft sensor Subaru Legacy 3 2.5AWD (BE9) 156 hp Petrol
- Crankshaft sensor Subaru Legacy 3 2.5AWD (BE9) 156 hp Petrol
- Timing cover gasket Subaru Legacy 3 2.5AWD (BE9) 156 hp Petrol
- Knock sensor Subaru Legacy 3 2.5AWD (BE9) 156 hp Petrol
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Spark plugs Subaru Legacy 3 2.5 AWD (BE9) 156 hp Petrol
Article №: 686S0027
Details
-
- Construction Year to: 06/2003
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0081
Details
-
- Engine Code: EJ251
- Construction Year to: 06/2003
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 4
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Spark Plug: Connector Type SAE, with gasket seat
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Tightening angle [degrees]: 90
- Condition: New
More
£3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0030
Details
-
- Construction Year to: 06/2003
- Fuel Type: CNG/LPG
- Replace after km: 30000
- Required quantity: 4
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Spark Plug: Iridium Middle Electrode, Fixed SAE connector, 1 - Earthed Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£6,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0316
Details
-
- Construction Year to: 06/2003
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0029
Details
- Product line: LPG Laser Line
- Thread Length [mm]: 19
- Spanner Size: 16 mm
- Spark Plug: Fixed SAE connector, 1 - Earthed Electrode
- Thread Size: M14 x 1,25
- Fuel Type: CNG/LPG
- Recommended change interval [km]: 60000
- TecDoc Engine Number: EJ25
- Condition: New
More
£10,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0326
Details
-
- Engine Code: EJ251
- Construction Year to: 06/2003
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Tightening angle [degrees]: 90
- Condition: New
More
£15,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990013
Details
-
- Construction Year to: 06/2003
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£1,16
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8EH 188 704-181
CM7RP-11
Details
-
- Engine Code: EJ251
- Construction Year to: 06/2003
- Thread Length [mm]: 19
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1,25
- Tightening Torque [Nm]: 30
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990001
Details
-
- Construction Year to: 06/2003
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, Fixed SAE connector, 1 - Earthed Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£2,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8EH 188 704-071
YM8RCP-9U
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1.25
- Tightening Torque [Nm]: 20
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£2,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0020
Details
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 1,1
- Spark Plug: 1 - Earthed Electrode
- Specification: Recommended
- Weight [kg]: 0,06
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£2,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 235 666
FR 7 D+, Blister N01 - FR 7 DC
Details
-
- Construction Year to: 06/2003
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£2,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0002P
Details
-
- Construction Year to: 06/2003
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£3,06
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0027P
Details
-
- Construction Year to: 06/2003
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Condition: New
More
£3,13
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 062711000011
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with resistor
- Thread Size: M14 x 1.25
- TecDoc Engine Number: EJ25
- Condition: New
More
£3,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: K16PR-U11
D21
Details
-
- TecDoc Engine Number: EJ25
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Connector type: Solid SAE
- Tightening Torque [Nm]: 22
- Diameter: 14
- Weight [g]: 43
- for OE number: 18814-11051
- alternative item: K16TT
- Condition: New
More
£3,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: U20FS-U
Details
- Product line: Nickel
- Thread Length [mm]: 12,7
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M10x1.0
- Connector type: Thread M4
- Tightening Torque [Nm]: 12
- Diameter: 10
- Weight [g]: 28,5
- alternative item: IUF22
- Condition: New
More
£3,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 229 660
FR 8 DCX+, Blister N23 - FR 8 DCX
Details
-
- Construction Year to: 06/2003
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£3,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCF860001
Details
-
- Construction Year to: 06/2003
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£4,03
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 7090513
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
- for OE number: 9004851099000
- Condition: New
More
£4,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0081P
Details
-
- Engine Code: EJ251
- Construction Year to: 06/2003
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Condition: New
More
£5,04
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0010
Details
-
- Engine Code: EJ251
- Construction Year to: 06/2003
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,7
- Spark Plug: 1 - Earthed Electrode
- Version: E7EC1
- Length [mm]: 126
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0065P
Details
-
- Construction Year to: 06/2003
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£12,25
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0316P
Details
-
- Construction Year to: 06/2003
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£12,52
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0066P
Details
-
- Construction Year to: 06/2003
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£18,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 112 products
Show the next items
- 1
- 2
- 3
- 4
- 5
