Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Subaru Impreza GG 2.0AWD (GG9) 125 hp Petrol
- Brake pads Subaru Impreza GG 2.0AWD (GG9) 125 hp Petrol
- Brake caliper Subaru Impreza GG 2.0AWD (GG9) 125 hp Petrol
- Drum brake Subaru Impreza GG 2.0AWD (GG9) 125 hp Petrol
- ABS sensor Subaru Impreza GG 2.0AWD (GG9) 125 hp Petrol
- Brake caliper repair kit Subaru Impreza GG 2.0AWD (GG9) 125 hp Petrol
- Handbrake Subaru Impreza GG 2.0AWD (GG9) 125 hp Petrol
- Brake disc back plate Subaru Impreza GG 2.0AWD (GG9) 125 hp Petrol
- Brake caliper carrier Subaru Impreza GG 2.0AWD (GG9) 125 hp Petrol
- Brake shoes Subaru Impreza GG 2.0AWD (GG9) 125 hp Petrol
- Brake hose IMPREZA 2.0AWD (GG9) 125 hp Petrol
- Master cylinder IMPREZA 2.0AWD (GG9) 125 hp Petrol
- Brake drum IMPREZA 2.0AWD (GG9) 125 hp Petrol
- Handbrake cable IMPREZA 2.0AWD (GG9) 125 hp Petrol
- Guide sleeve kit, brake caliper IMPREZA 2.0AWD (GG9) 125 hp Petrol
- Handbrake shoes IMPREZA 2.0AWD (GG9) 125 hp Petrol
- Brake fluid IMPREZA 2.0AWD (GG9) 125 hp Petrol
- Brake pad fitting kit IMPREZA 2.0AWD (GG9) 125 hp Petrol
- Wheel cylinder IMPREZA 2.0AWD (GG9) 125 hp Petrol
- Accessory kit, brake shoes IMPREZA 2.0AWD (GG9) 125 hp Petrol
- Brake pads and discs IMPREZA 2.0AWD (GG9) 125 hp Petrol
- Brake light switch IMPREZA 2.0AWD (GG9) 125 hp Petrol
- Brake shoe adjuster IMPREZA 2.0AWD (GG9) 125 hp Petrol
- Abs ring IMPREZA 2.0AWD (GG9) 125 hp Petrol
- Brake caliper piston IMPREZA 2.0AWD (GG9) 125 hp Petrol
- Performance brake discs IMPREZA 2.0AWD (GG9) 125 hp Petrol
- High-performance brake pads IMPREZA 2.0AWD (GG9) 125 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Subaru Impreza GG 2.0 AWD (GG9) 125 hp Petrol
Article №: DDF679C
Details
- Product line: PREMIER Coat+ disc
- Fitting Position: Front Axle
- Diameter [mm]: 277
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 58
- Height [mm]: 56,8
- Weight [kg]: 6,11
- Surface: Coated
- Tightening Torque [Nm]: 100
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packaging length [cm]: 27
- Packaging width [cm]: 27
- Packaging height [cm]: 10,7
- Drilled: no
- Condition: New
More
£ 36,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 87 92 8153
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 266
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 67,5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Centering Diameter [mm]: 58
- Weight [kg]: 4,25
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 36,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF1437
Details
- Fitting Position: Front Axle
- Diameter [mm]: 277
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 58
- Height [mm]: 56,7
- Surface: Painted
- Thread Size: 13
- Colour: black
- Test Mark: E190R-02C0176/0450
- Drilled: no
- Condition: New
More
£ 39,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.5674.21
Details
- Product line: Prime
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 58
- Height [mm]: 57
- Surface: Coated
- Tightening Torque [Nm]: 100
- Drilled: no
- Condition: New
More
£ 39,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 530.2457.20
Details
- Product line: COAT Z
- Fitting Position: Front Axle
- Diameter [mm]: 277
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Hole Arrangement/Number: 7/5
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 58
- Height [mm]: 57
- Weight [kg]: 6
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 41,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 479 147
Details
-
- Construction Year to: 06/2007
- Fitting Position: Front Axle
- Diameter [mm]: 277
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 58,02
- Height [mm]: 56,8
- Surface: Oiled
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,8
- Drilled: no
- Condition: New
More
£ 42,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 530.2456.20
Details
- Product line: COAT Z
- Fitting Position: Front Axle
- Diameter [mm]: 260
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Hole Arrangement/Number: 7/5
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 58
- Height [mm]: 57
- Weight [kg]: 5,24
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 42,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 129-421
Details
- Product line: PRO High Carbon
- Fitting Position: Front Axle
- Diameter [mm]: 277
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/07
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 58
- Height [mm]: 56,6
- Weight [kg]: 6,2
- Surface: Coated
- Machining: High-carbon
- Technical Information Number: 53305PRO_HC
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£ 42,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 87 92 6049
Details
- Fitting Position: Front Axle
- Diameter [mm]: 277
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 57
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 58
- Weight [kg]: 6,2
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 44,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92094603
Details
- Product line: PRO
- Fitting Position: Front Axle
- Diameter [mm]: 277
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/07
- Wheel Bolt Bore Diameter [mm]: 12,7
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 58
- Inner Diameter [mm]: 129
- Height [mm]: 56,6
- Weight [kg]: 6,2
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 31,3
- Packaging width [cm]: 31,3
- Packaging height [cm]: 14
- Drilled: no
- Condition: New
More
£ 44,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 105-331
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 266
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/07
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Centering Diameter [mm]: 58
- Inner Diameter [mm]: 170
- Height [mm]: 67,5
- Weight [kg]: 4,4
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£ 45,63
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 479 E69
Details
-
- Construction Year to: 06/2007
- Fitting Position: Front Axle
- Diameter [mm]: 277
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 58,02
- Height [mm]: 56,8
- Surface: Coated
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,8
- Drilled: no
- Condition: New
More
£ 46,05
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 530.2459.20
Details
- Product line: COAT Z
- Fitting Position: Rear Axle
- Diameter [mm]: 266
- Brake Disc Type: solid
- Rim Hole Number: 5
- Hole Arrangement/Number: 7/5
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Centering Diameter [mm]: 58
- Height [mm]: 67
- Weight [kg]: 4,3
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 46,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 673310
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 266
- Brake Disc Type: solid
- Rim Hole Number: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Height [mm]: 66,8
- Weight [kg]: 9,11
- Surface: Coated
- Machining: High-carbon
- Number of mounting bores: 2
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring, without integrated wheel bearing
- Condition: New
More
£ 49,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.5674.76
Details
- Product line: Xtra
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Brake Disc Type: internally vented, slotted
- Number of Holes: 5
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 58
- Height [mm]: 57
- Surface: Coated
- Tightening Torque [Nm]: 100
- Drilled: no
- Condition: New
More
£ 50,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0124-0145.1
Details
-
- Construction Year to: 09/2005
- Fitting Position: Front Axle
- Diameter [mm]: 277,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Brake Disc Thickness [mm]: 24,0
- Minimum thickness [mm]: 22,0
- Centering Diameter [mm]: 58,0
- Inner Diameter [mm]: 129,0
- Height [mm]: 56,5
- Surface: Coated
- MAPP code available
- Test Mark: E1 90R-02C0115/0382
- Bore Diameter [mm]: 13,0
- Drilled: no
- Condition: New
More
£ 53,65
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG3819
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 316
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Centering Diameter [mm]: 58
- Height [mm]: 67,2
- Surface: Oiled
- Test Mark: E1 90R-02C0876/1900
- Drilled: no
- Condition: New
More
£ 53,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QD7079HC
Details
- Fitting Position: Front Axle
- Diameter [mm]: 277
- Brake Disc Type: internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 58
- Height [mm]: 56,6
- Surface: Painted
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Drilled: no
- Condition: New
More
£ 54,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: J3307011
Details
- Fitting Position: Front Axle
- Diameter [mm]: 277
- Brake Disc Type: internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 58,1
- Wheel Hub Diameter [mm]: 139
- Height [mm]: 56,6
- Surface: Painted
- Drilled: no
- Condition: New
More
£ 54,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.5674.2X
Details
- Product line: Xtra
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22,5
- Centering Diameter [mm]: 58
- Height [mm]: 57
- Surface: Coated
- Tightening Torque [Nm]: 100
- Drilled: yes
- Condition: New
More
£ 62,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 530.2457.52
Details
- Product line: SPORT COAT Z
- Fitting Position: Front Axle
- Diameter [mm]: 277
- Brake Disc Type: internally vented, Perforated
- Rim Hole Number: 5
- Hole Arrangement/Number: 7/5
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 58
- Height [mm]: 57
- Weight [kg]: 6
- Surface: Coated
- Test Mark: KBA 60872
- Drilled: yes
- Condition: New
More
£ 77,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 314406
Details
- Fitting Position: Front Axle
- Diameter [mm]: 277
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 58
- Height [mm]: 56,5
- Surface: Coated
- Net weight [kg]: 6,07
- Drilled: no
- Condition: New
More
£ 80,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BS-3980C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 266
- Brake Disc Type: solid
- Construction Year to: 09/2005
- Hole Arrangement/Number: 5/7
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Centering Diameter [mm]: 58
- Height [mm]: 67
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 98,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BS-7976HC
Details
- Fitting Position: Front Axle
- Diameter [mm]: 277
- Brake Disc Type: Vented
- Construction Year to: 09/2005
- Hole Arrangement/Number: 5/7
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 58
- Height [mm]: 57
- Surface: Coated
- Machining: High-carbon
- Drilled: no
- Condition: New
More
£ 131,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: S6047610
Details
- Fitting Position: Front Axle
- Diameter [mm]: 260
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 58
- Height [mm]: 56,8
- Weight [kg]: 5,6
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£ 14,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 210 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
