Search for Mitsubishi Lancer IV Hatchback (C6_A, C7_A) Lambda sensor:
Mitsubishi Lancer 4 Lambda sensor
Exhaust car spares Mitsubishi Lancer IV Hatchback C6_A, C7_A
- MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) Turbo
- MITSUBISHI Lancer 4 (C6_A, C7_A) Catalytic converter
- Mitsubishi Lancer 4 Diesel particulate filter (DPF)
- MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) Exhaust silencer
More
Best goods: Lambda sensor Mitsubishi Lancer 4
incl. 20% VAT, excl. delivery costs
- Supplementary Info: Universal
- Oxygen Sensor: Unheated
- Number of circuits: 1
- Supplementary Article / Supplementary Info Info 2: without plug
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: after catalytic converter
- Fabrication Number: ESL-AU-007
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Oxygen Sensor
- Number of circuits: 1
- Weight [kg]: 0,08
- Voltage [V]: 12
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.)
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Thread pre-greased, Heated
- Fitting Position: before catalytic converter
- Cable Length [mm]: 1731
- Length [mm]: 1731
- Number of circuits: 4
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: after catalytic converter
- Fabrication Number: ESL-VW-001
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Regulating Probe
- Number of circuits: 4
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased
- Fitting Position: before catalytic converter, after catalytic converter
- Fabrication Number: ESL-RE-001
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Oxygen Sensor, Thread pre-greased
- Fabrication Number: ESL-UV-001
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Oxygen Sensor
- Cable Length [mm]: 200
- Number of pins: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Specification: Isolated Ground, Planar Type, Zirconia Type
- Length [inch]: 7,87
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Regulating Probe
- Number of circuits: 4
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Info: EXPERT KITS +
- Oxygen Sensor: Finger probe, Heated, Thread pre-greased
- Fitting Position: after catalytic converter
- Cable Length [mm]: 210
- Number of pins: 4
- Length [mm]: 350
- Number of circuits: 4
- for OE number: V99760001
- Supplementary Article / Supplementary Info Info 2: without plug
- Line insulation design: with silicone-coated woven-fibre insulation
- Packaging height [cm]: 9,2
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Oxygen Sensor
- Number of circuits: 4
- Weight [kg]: 0,09
- Voltage [V]: 12
- Resistor [Ohm]: 13
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.)
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Unheated
- Number of circuits: 1
- Recommended change interval [km]: 100000
- Supplementary Article / Supplementary Info Info 2: without plug
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Oxygen Sensor
- Number of circuits: 1
- Weight [kg]: 0,08
- Voltage [V]: 12
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.)
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Oxygen Sensor
- Number of circuits: 4
- Weight [kg]: 0,14
- Voltage [V]: 12
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.)
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Oxygen Sensor
- Weight [kg]: 0,12
- Always compare old and new part (in particular OE No.)
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Regulating Probe, Unheated
- Length [mm]: 630
- Number of circuits: 2
- Weight [kg]: 0,14
- Voltage [V]: 12
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.)
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Planar probe, Heated
- Cable Length [mm]: 325
- Condition: New
Over 100 in stock
NTY ESL-TY-043 Lambda sensor
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Diagnostic Probe
- Cable Length [mm]: 900
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Regulating Probe
- Overall Length [mm]: 200
- Number of circuits: 1
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Heated
- Length [mm]: 1250
- Number of circuits: 4
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Oxygen Sensor: Finger probe
- Cable Length [mm]: 800
- Number of circuits: 1
- Weight [kg]: 0,074
- Spanner Size: 22
- External Thread Size: M18x1,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Product line: Universal
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Product line: Universal fit
- Oxygen Sensor: Heated, Oxygen Sensor
- Thread Size: M18x1,5, M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Quality: OE
- Weight [g]: 103
- Gross Weight [g]: 147
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £140 within the UK
Fast delivery
