Search for Volkswagen Touareg II (7P5, 7P6) Glow plugs:
VW Touareg 7p Glow plugs

- VW Touareg (7P5, 7P6) Spark plugs
- VW Touareg II (7P5, 7P6) Ignition coil
- VW Touareg 7p Glow plug relay
- VW Touareg (7P5, 7P6) Ignition leads
Is it time to replace the Glow plugs on your VW Touareg 7p? These tips will help you!
Faulty Heater plug on a car such as the VW Touareg 7p make it difficult to start the engine and impair idling. We recommend checking these parts before the cold season and replacing them at least once every 90.000 km.
If not replaced on time, on All-wheel Drive versions with a displacement of 3.0, 4.2, 3.6, 4.1 litres and output of 204, 379 hp, these components will oxidise. This can make them difficult to remove. If you try to remove oxidised Ignition and preheating, their tips may break off and stay in the engine cylinders.
Please note: new elements on a 08.2010 - 03.2018 Touareg 7P5, 7P6 must always be installed in sets.
You will find many products from Bosch, FEBI Bilstein, BERU, Denso, NGK and other brands in the catalogue of our online shop and you will be able to buy Heater plug for VW Touareg 7p at a reasonable price.
Best goods: Glow plugs VW Touareg 7p

- Supplementary Info: Duraterm
- Thread Size: M 10 x 1
- Length [mm]: 130
- Voltage [V]: 4,4
- Spanner Size: 10
- Glow Plug Design: Rod Glow Plug
- Fitting Depth [mm]: 28
- Connector type: PIN
- Tightening torque to [Nm]: 15
- Tightening torque from [Nm]: 10
- Cone Pitch: 63
- Supplementary Article / Supplementary Info Info 2: without pressure sensor
- Condition: New
- Overall Length [mm]: 126,3
- Thread Size: M10x1.0
- Voltage [V]: 4,4
- Spanner Size: 10
- Connector type: Pin
- Tightening torque to [Nm]: 12
- Tightening torque from [Nm]: 10
- Weight [g]: 35,3
- for OE number: 059963319J
- Version: Instant heating
- alternative item: -
- Condition: New
- Length [mm]: 130
- Voltage [V]: 4,4
- Spanner Size: 10
- Glow Plug Design: Metal glow plug
- Weight [kg]: 0,04
- for OE number: 03L 963 319 D
- External Thread Size: M10 x 1
- Supplementary Article / Supplementary Info Info 2: without pressure sensor
- Condition: New

- Thread Size: M10x1
- Length [mm]: 126
- Voltage [V]: 4
- Spanner Size: 10
- Glow Plug Design: Metal glow plug, Pencil-type Glow Plug
- Fitting Depth [mm]: 28
- Diameter [mm]: 4
- Condition: New
- Length [mm]: 130
- Voltage [V]: 4,4
- Spanner Size: 10
- Glow Plug Design: Metal glow plug
- Weight [kg]: 0,04
- External Thread Size: M10 x 1
- Supplementary Article / Supplementary Info Info 2: without pressure sensor
- Condition: New
- Thread Size: M10 x 1,0
- Length [mm]: 127,7
- Voltage [V]: 4,4
- Spanner Size: 10 mm
- Glow Plug Design: Metal glow plug
- Fitting Depth [mm]: 24, 28
- Connector type: PIN
- Current Strength [A]: 7,5
- Condition: New
- Overall Length [mm]: 129,4
- Thread Size: M10X1
- Length [mm]: 81, 27
- Voltage [V]: 4,4
- Spanner Size: 10
- Glow Plug Design: Metal glow plug
- Connector type: PIN
- Current Strength [A]: 8
- Tightening torque to [Nm]: 15
- Tightening torque from [Nm]: 10
- Mounting Inclination: 63
- Heat-up Time [min]: 2
- Condition: New

- Supplementary Info: Original VEMO Quality
- Weight [kg]: 0,034
- Packaging height [cm]: 2,7
- Packaging Depth [cm]: 2,1
- Condition: New
- Thread Size: M10x1,0
- Length [mm]: 130
- Voltage [V]: 4,4
- Spanner Size: 10 mm
- Glow Plug Design: after-glow capable, Pencil-type Glow Plug
- Fitting Depth [mm]: 28
- Connector type: 4 mm
- Current Strength [A]: 25
- Tightening Torque [Nm]: 15
- Cone Pitch: 63
- Failure Moment [Nm]: 35
- Multi-piece: four-piece
- Condition: New
- Thread Size: M10x1,0
- Length [mm]: 130
- Voltage [V]: 4,4
- Spanner Size: 10 mm
- Glow Plug Design: after-glow capable, Pencil-type Glow Plug
- Fitting Depth [mm]: 28
- Connector type: 4 mm
- Current Strength [A]: 25
- Tightening Torque [Nm]: 15
- Cone Pitch: 63
- Failure Moment [Nm]: 35
- Condition: New

- Overall Length [mm]: 148
- Thread Size: M10x1
- Voltage [V]: 4,4
- Spanner Size: 12
- Fitting Depth [mm]: 27
- Connector type: Ø 10mm
- Cone Pitch: 63
- not for control unit manufacturer: BOSCH EDC17C64
- Supplementary Article / Supplementary Info Info 2: with pressure sensor
- Article number of recommended accessories: 0873012
- Condition: New
- Overall Length [mm]: 130
- Thread Size: M10X1,00
- Voltage [V]: 4,4
- Spanner Size: 10
- Fitting Depth [mm]: 27
- Connector type: 4MM PIN
- Tightening torque to [Nm]: 20
- Tightening torque from [Nm]: 15
- Cone Pitch: 63
- Resistor [Ohm]: 0,45
- Weight [kg]: 0,04
- Condition: New