Search for Volkswagen Touareg I (7LA, 7L6, 7L7) Glow plugs:
Touareg 7L Glow plugs

- VW Touareg (7LA, 7L6, 7L7) Spark plugs
- VW Touareg I (7LA, 7L6, 7L7) Ignition coil
- Touareg 7L Glow plug relay
- VW Touareg 7L Ignition leads
Is it time to replace the Glow plugs on your Touareg 7L? These tips will help you!
Faulty Heater plug on a car such as the VW Touareg 7L make it difficult to start the engine and impair idling. We recommend checking these parts before the cold season and replacing them at least once every 60.000 km.
If not replaced on time, on All-wheel Drive versions with a displacement of 6.0, 3.6, 4.2, 3.2, 4.9 litres and output of 163, 450 hp, these components will oxidise. This can make them difficult to remove. If you try to remove oxidised Ignition and preheating, their tips may break off and stay in the engine cylinders.
Please note: new elements on a 10.2002 - 11.2006 Touareg 7LA, 7L6, 7L7 must always be installed in sets.
You will find many products from Bosch, FEBI Bilstein, BERU, Denso, NGK and other brands in the catalogue of our online shop and you will be able to buy Heater plug for Touareg 7L at a reasonable price.
Best goods: Glow plugs Touareg 7L

- Supplementary Info: Duraterm
- Thread Size: M 10 x 1
- Length [mm]: 130
- Voltage [V]: 4,4
- Spanner Size: 10
- Glow Plug Design: Rod Glow Plug
- Fitting Depth [mm]: 28
- Connector type: PIN
- Tightening torque to [Nm]: 15
- Tightening torque from [Nm]: 10
- Cone Pitch: 63
- Supplementary Article / Supplementary Info Info 2: without pressure sensor
- Condition: New
- Product line: D-Power
- Overall Length [mm]: 97,0
- Thread Size: M10 x 1,0
- Voltage [V]: 7,0
- Spanner Size: 10 mm
- Glow Plug Design: Ceramic Glow Plug
- Fitting Depth [mm]: 30,0
- Connector type: PIN
- Current Strength [A]: 7,0
- Resistor [Ohm]: 0,3
- Condition: New
- Length [mm]: 130
- Voltage [V]: 4,4
- Spanner Size: 10
- Glow Plug Design: Metal glow plug
- Weight [kg]: 0,04
- for OE number: 03L 963 319 D
- External Thread Size: M10 x 1
- Supplementary Article / Supplementary Info Info 2: without pressure sensor
- Condition: New
- Thread Size: M10x1,0
- Length [mm]: 97
- Voltage [V]: 12
- Spanner Size: 10 mm
- Glow Plug Design: after-glow capable, Pencil-type Glow Plug
- Fitting Depth [mm]: 30
- Connector type: 4 mm PIN
- Current Strength [A]: 16
- Tightening torque to [Nm]: 20
- Tightening torque from [Nm]: 15
- Cone Pitch: 63
- Failure Moment [Nm]: 35
- Fuel Mixture Formation: Unit Injector System (UIS)
- Condition: New

- Thread Size: M 10 x 1
- Length [mm]: 96
- Voltage [V]: 7
- Spanner Size: 9
- Glow Plug Design: Pencil-type Glow Plug, after-glow capable
- Fitting Depth [mm]: 29
- Connector type: PIN
- Tightening torque to [Nm]: 15
- Tightening torque from [Nm]: 10
- Cone Pitch: 63
- Condition: New
- Thread Size: M8x1
- Length [mm]: 147
- Voltage [V]: 4
- Spanner Size: 8
- Glow Plug Design: Metal glow plug, Pencil-type Glow Plug
- Fitting Depth [mm]: 27
- Diameter [mm]: 4
- Condition: New
- Supplementary Info: ORIGINAL Quality
- Overall Length [mm]: 96,5
- Thread Size: M10 x 1
- Rated Voltage [V]: 11
- Spanner Size: 10
- Glow Plug Design: Pencil-type Glow Plug, after-glow capable
- Fitting Depth [mm]: 30
- Connector type: Pin Ø 4 mm
- Cone Pitch: 63°
- Condition: New
- Length [mm]: 130
- Voltage [V]: 4,4
- Spanner Size: 10
- Glow Plug Design: Metal glow plug
- Weight [kg]: 0,04
- External Thread Size: M10 x 1
- Supplementary Article / Supplementary Info Info 2: without pressure sensor
- Condition: New
- Voltage [V]: 11
- Spanner Size: 10mm
- Glow Plug Design: Pencil-type Glow Plug, after-glow capable
- Plug Type: Round Plug
- Assy./disassy. by qualified personnel required!
- Condition: New
- Thread Size: M10 x 1,0
- Length [mm]: 127,7
- Voltage [V]: 4,4
- Spanner Size: 10 mm
- Glow Plug Design: Metal glow plug
- Fitting Depth [mm]: 24, 28
- Connector type: PIN
- Current Strength [A]: 7,5
- Condition: New

- Product line: Original Quality
- Overall Length [mm]: 97
- Thread Size: M10 x 1,0
- Voltage [V]: 11
- Spanner Size: 10 mm
- Glow Plug Design: Pencil-type Glow Plug, after-glow capable
- Fitting Depth [mm]: 30
- Current Strength [A]: 16
- Tightening Torque [Nm]: 15
- Cone Pitch: 63?
- Weight [kg]: 0,026
- Fuel Mixture Formation: Unit Injector System (UIS)
- Packaging width [cm]: 16
- Packaging height [cm]: 2,7
- Packaging Depth [cm]: 2,1
- Condition: New